teruo / Voted
After formatting a USB HDD (in this case, a 500GB EIDE Drive hooked to the PS3 via an old USB CDROM enclosure) in the PS3, it is transferred to a PC. Once transferred, a properly decrypted, patched and remastered retail game is written to the drive. The drive is then plugged back in via USB to the PS3 TEST, while off.
The Drive is then turned on, followed by the PS3. Once the PS3 is on the BD-Emulator is set to USB. DEV is for a PS3 TOOL, which has an additional internal HDD for BD-Emulator purposes, and BD Drive is self explanatory. The PS3 then gets rebooted.
Upon reboot is where the video starts, it first shows the previous settings in the PS3, and then the game that was remastered, Kane & Lynch: Dead Men is started from BD-Emulator. The BD-Emulator ... More »
With the hot news I saw I had to do something! Swap Magic on PS3 running? I thought it was patched, and indeed so, but only on US/Jap consoles.. I tried several swap magic (SM from now), but none worked... and this is becaused it IS patched, on fw 2.10 and up.
So I thought... if they patched a specific title, they seem they haven't patched others... so I found that I can create a bootable PS2 disc and I made one. I added many useful PS2 ELFs (not all useful for now..) but we have what we need. Ok, first the proof and then tutorial:
This method using an original SM disk has been already posted.. but never actully confirmed how or when SM works.. The method with an ORIGINAL SM DISC works only on EUROPEAN PS3s any FW, except 40gb p... More »
But for more explosive news (who doesn't love a pun?) we recently received two special PS3 PUP files from a VERY nice guy. As pictured below, they are PS3 Debug 1.00 (65.5 MB (68,765,224 bytes)) and PS3 Debug 1.50 (72.2 MB (75,762,080 bytes)).
These PUPs, which are the special downgrade PUPs, allow a user to downgrade their PS3 TEST from any version down to it. For example, with the 1.00 SPECIAL Downgrade PUP a user can be on 2.40, install it, and after a reboot be on 1.00!
1.00, which lacks just about every feature but ON/OFF functionality, will then let us upgrade to any DEV firmware above it.
Which brings us to 1.50... Through examining numerous Sony documentation recently, we have read that in the 1.60 Firmware the PS3's kernel memory and user memory are separated, leading us to believe that the kernel m... More »
High praises are given by the big three industry review giants: Gamespot, IGN and Gamepro. These reviewers have been in the industry for over 22 years. Practically most of us grew up reading their reviews.
These review sites are no slouch, especially IGN and Gamespot with their very strict 10 point scale. IGN has only 15 some games that have ever received a perfect score of a 10. They define only a game that is revolutionary or truly defines a genre deserves a perfect score such as Metal Gear Solid 4.
Gamespot is known to be even more strict in their scoring, only giving five games in their entire history back to 1996 a perfect 10. With the addition of Metal Gear Solid 4, that makes it a total of six games in their history of deserving a perfect score.
<... More »
(0) 
Submitter:
PS3 News
- 45 minutes ago (http://shop.ps3news.com)
Site Tags: shop deals gaming accessories
Category: Shop/Deals
Site Tags: shop deals gaming accessories
Category: Shop/Deals
Use Coupon Code: holiday at check-out to get 15% OFF your order!
Use and 3V 1600 - 1800 Milliampere to feed the NANDS.
Just feed Flash0 and you'll have Flash1 feeded too.
Click image below to enlarge some, or HERE for high res version.
Each application can be binded to certain keys. When that key is held during bootup, the PSP will automatically load your homebrew. As always, refer to the included readme file for installation and usage instructions.
Download: AutoStart PRX Plug-In for M33 CFW for PSP
To quote: Here's a small plug-in I've made that allows you to launch your homebrew at startup. You can configure it to launch up to four different eboots with the included configurator.
For example, by holding cross at start up, you can load one homebrew, while holding triangle will load another. Hope you like it!
After nearly 5 years a new version ePSXe, one of the best PSX emulators for PC, has been released.
ePSXe 1.7.0 has been updated to v1.7.0 and is available for download below.
Download: ePSXe v1.7.0
Short Changelog:
- Multiple changes has been done in the Pad support.
- The internal SPU plugin has been updated to the 1.7.0 version.
- The iSO support code has been rewritten.
- The MDEC decoder has been rewritten.
- A new version of the Pete's Software Plugin is included.
- The XA/CDDA support has been worked in this new version.
- Many things have been fixed in the cd-rom decoder and the core.
ePSXe 1.7.0 has been updated to v1.7.0 and is available for download below.
Download: ePSXe v1.7.0
Short Changelog:
- Multiple changes has been done in the Pad support.
- The internal SPU plugin has been updated to the 1.7.0 version.
- The iSO support code has been rewritten.
- The MDEC decoder has been rewritten.
- A new version of the Pete's Software Plugin is included.
- The XA/CDDA support has been worked in this new version.
- Many things have been fixed in the cd-rom decoder and the core.
OldPrisoneR and Andy_maN have updated FuSa today, a Custom Firmware Plug-in that enables Slim owners to play PSP games on any television regardless of the input cable used - composite, component, S-video, D-terminal.
In addition to multi-language support and various optimizations, Build 45 features an additional full screen mode and allows users to toggle the FPS/priority values by simply holding right or left on the D-pad.
Download: PSP FuSa v1.0 Build 45
Changelog:
- Now FuSa support 6 languages (ENGLISH, RUSSIAN, GERMAN, ITALIAN, DUTCH, POLISH)
- Fullscreen mode 2 was added (REAL FULL SCREEN!)
- You don't need dvemgr.prx now
- Now you can just hold RIGHT and LEFT buttons while setting up FPS/priority - values will scroll automaticly
- NEW: menu hotkey was added - hold R-TRIGGER while setting up FPS/priority - 10x scroll speed
- And a few code... More »
In addition to multi-language support and various optimizations, Build 45 features an additional full screen mode and allows users to toggle the FPS/priority values by simply holding right or left on the D-pad.
Download: PSP FuSa v1.0 Build 45
Changelog:
- Now FuSa support 6 languages (ENGLISH, RUSSIAN, GERMAN, ITALIAN, DUTCH, POLISH)
- Fullscreen mode 2 was added (REAL FULL SCREEN!)
- You don't need dvemgr.prx now
- Now you can just hold RIGHT and LEFT buttons while setting up FPS/priority - values will scroll automaticly
- NEW: menu hotkey was added - hold R-TRIGGER while setting up FPS/priority - 10x scroll speed
- And a few code... More »
