228w ago - Today mx24 dropped us an e-mail to let us know of a new PS3 modification he has posted at Spanish Web site Elotrolado (linked above).
In summary, he has added a SMA connector to his Sony PlayStation 3 console and as a result he was able to increase the WiFi signal from 20% to 52%.. over a 25% jump!
Below is a picture of the finished PS3 External WiFi Antenna Mod, and also 'before' and 'after' pics of the Internet Connection screens.
To quote in part, roughly translated: Good, after several days of work and investigation, I have been able to replace one of the internal antennas wifi of ps3 (ANT0-WLAN) by 9 an external antenna of dbi, connected through connecting SMA, implanted in the back part of the console.
To comment that once with the materials in my power, and with the clear things on the way to act, this mod has not taken to me but of 30 minutes. Including the disassembling, implantation of the connector and final assembly of the machine.
We begin by the necessary materials:
1. a PS3 with board Wifi, that is to say, that our black has Wifi connection.
2. a Pigtail UFL to SMA female of 30 cm. (Between 10 and 15 Euros)
3. an antenna with male connection SMA; it has of all the powers, from 5 dbi to 50. (from 5 Euros)
291w ago - From the source linked above: GodzIvan strikes again (after releasing one wire diagrams to Pandorize PSP slim and fat), this time he uploaded a pin-out diagram along with signal info for the flat cable connecting the PS3 Blu-ray drive.