1100°
164w ago - As
promised, today
JaicraB has revealed the PS3 Hypervisor LV2 (GameOS) dump method and circuit used to allow the PS3's memory to persist while booting into OtherOS, which then allows dumping of the memory.
This was apparently on a
CECHG model system with board model
SEM-001 1-875-384-21
To quote, roughly translated:
DemonHades /
JaicraB Extraction Method:
First of all, be careful if you're going to attempt this, I am not responsible.
It's about keeping the RAM alive when moving to OtherOS. To do this the ram must be fed at all times so as not to erase the data.
Overview map
Refer to the First Image below.
Zone A
http://4.bp.blogspot.com/_4rtVxQc9D6s/S7dexn30R7I/AAAAAAAAAFs/tpo2XxknPKs/s1600/Zona+A.JPG
This area is sensitive. At that point we had settled with two resistors together. You have to remove it (remove it, but you could also cause a short circuit). It has 4 legs. At this point it tells the RAM and the integrated MOSFET turns off.
Zone B
http://3.bp.blogspot.com/_4rtVxQc9D6s/S7deyC8VeyI/AAAAAAAAAF0/bGUuh1knvRA/s1600/Zona+B.JPG
From the...
1200°
i noob, tanks...
