PS3 TOOL DECR-1000A Internal Pictures and Details Available

550°
233w ago - Recently the PS3 Dev Team received a PS3 Reference TOOL Kit and detailed the Frontside and Backside of the hardware.

Today we popped off the top of our PS3 TOOL to share how this monstrous machine works!

For starters, the cover is large but thin, and quite sharp (it drew blood!). Underneath the top cover are multiple steel covers, nearly 1/8th of an inch thick. This keeps the PS3 TOOL shielded, and also helps with ventilation.

Of an interesting note, the covers are so thick they block the WiFi and Bluetooth signals - this is why a PS3 TOOL needs an external antenna. Once the shielding covers are removed (along with about 15 screws) the signal can escape the system without issue... and we can start to see the internals of the PS3 TOOL.

Looking at the overview, on the far left features, from top to bottom, the System HDD at 400GB, the BDEMU HDD at 400GB, as well as the BD-ROM drive at the bottom.

To the right of that, there are air channels that are used as an intake, sucking air in from the...
 

PS3 Reference Tool - DECR-1000A Backside Detailed

550°
237w ago - Sony's PS3, circa E3 2005 - it was great. Dual HDMI outputs, 3X LAN and lots more.

Last week we covered the PS3 DECR-1000A Front, and so today let's take a peek at the backside of Sony's PS3 Reference Tool.

We can cut right to the goodies! Back of the tool: starting on the far right features a power connector to the variable 100-240V PSU, for multi-region support.

Next up is the AV, there is your normal AV MULTI Out for standard composite output. Directly next to that is a TOOL exclusive feature, a DSUB connector for hooking up a VGA monitor directly, instead of using converters (if need be).

Below that are DUAL HDMI outputs, however after SDK version .85 output to the second HDMI connector was disabled - however all the hardware is still functional, so it could be enabled on a whim.

Next to the HDMI outputs is the Optical Output, just like on a PS3, it passes high quality sound to a receiver, not as good as HDMI, but quite well.

Next up - the LAN. Just like the original PS3 plan, the TOOL does feature 3 system RJ-45 Jacks, however the right most two are disabled, although all of the hardware is still intact. The other is used for the system, to access PSN and play...
 

First Look: PS3 TOOL - DECR-1000A Front Detailed

700°
238w ago - Earlier this month I purchased a PS3 Reference Tool Model DECR-1000A.

Today I had time so here are some details on exactly what the front of it consists of... I will do a follow-up on the backside and internals soon, and then we'll get into the PS3 Dev aspects of it.

We all remember E3's PS3 - Dual HDMI outputs for extra high-definition widescreen goodness, a built in 3 port gigabit switch, 6 USB ports - features that were trashed. But, on the PS3 Tool, these features are still present, albeit dormant.

Pictured below is the front of the PS3 Tool (click to enlarge it, so you can read the labels), complete with the hidden ports uncovered for you to look at.

The PS3 Tool features, starting from the front left - dual HDD caddies, both sporting a 400GB SATA Hard disk, with eject buttons. - the left most (HDD) is used for the system, while DEV1, holding BD Emulator Images - allowing testing of .ISO's right from a hard disk!

Below that, a Foot Switch Jack is featured which can be used for throwing exceptions for development while playing, among other things.

To the right are 6 USB Ports. The 2 ports marked "extra" were originally intended for the REAR...
 

PS3 Reference TOOL Kit Arrives for the PS3 News Dev Team!

1150°
241w ago - Well, I hinted at it last week, that we were getting something BIG, and yeah- we did!

It retails for $10,250.00, weighs in around 45lbs, is around 19" wide and 24" deep. If you have not guessed it yet, it's a PS3 TOOL, also known as a PS3 Reference Kit, also known as the DECR-1000A.

This unit is the big brother to the new DECR-1400A, and has many more features than the newer, neutered counterpart. Most of them are outlined in my recently updated thread, but the jist of it is that it has dual 400GB hard disks, dual HDMI outputs, 4x LAN connectors, analog audio output, VGA output - just to name a few.

Compared to a PS3 Debug/TEST unit, the PS3 TOOL can do MUCH more, including diagnosing exactly what is happening when perceived "exploit" code is run to crash/hang the PS3. However, the biggest feature is having the ability...
 

PS3 TOOL DECR-1400A First Look - Dual LAN Ports & More!

400°
246w ago - We all heard about this back in March, that Sony was releasing a new model PS3 TOOL, the DECR-1400A. I have been anxiously waiting (as well as about 4 other people on the planet) for the release of the new TOOL.

Questions buzzed through my head, does it have one NIC or two? We know that since it was in the original PS3 form factor it would have only one HDD, of unknown size, as the other HDD, which is used for BD emulation can now be done via USB.

But, back to the NIC issue - on a TOOL, it has multiple Network Interfaces, one for the PS3 side (or three, for the really old TOOL's), and one for the Communication Processor (the DEBUG side).

The Communication Processor helps facilitate LV2 (kernel) debugging as it is a pure hardware interface, and does not totally rely on software to capture data.

So, the CP Debugging is quite a bit more "low level" than that of a PS3 TEST. Now, the CP is useful when debugging your game, as if it crashes the kernel- one can see why.

Hense our dilemma - a TOOL really needs a CP to do its job, and it would be hard to squeeze that in. However, with the decrease in size of the PS3's motherboard, it is now quite possible to add in...
 







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News