Sponsored Links

Sponsored Links

PS3 Water Cooling Mod Solutions Available

700°
292w ago - Remember when the first liquid cooled PS3 hit the Internet? Well finally some of the major cooling manufacturers are starting to take notice that us PS3 owners are looking for better options.

Two of these manufacturers are [Register or Login to view links] and [Register or Login to view links].

A bit pricey for the water blocks, plus you need a radiator/pump system to complete the setup. These new water blocks are great because they give you a very clean, almost un-modded look due to the fact the 2 hoses exit out the rear.

As of writing this the prices are as follows: Koolance kit (no radiator or pump) is $92.99 and the Innovatek goes for $126.30 (used currency converter).
 

Steampunk PS3 Mod Design Unveiled!

200°
293w ago - Today Damnation shared a great looking Steampunk PS3 Mod for all to appreciate, envy and respect.

Created with the importance of the warranty in mind, all additions, changes and items were added to the outside of the PS3, as to keep the warranty intact and ready for use (just in case).

To quote: The PS3 began with a wood veneer and then grew with outside attachments including: an old radio valve, a pipe valve, a pressure gauge, assorted brass plumbing parts and some trim. The wood veneer was then aged with a few coats of varnish.

The final look of this PlayStation Mod is a Steampunk style that is not overly done.

It does grant the PS3 its own theme, uniqueness and amazing finish and is definitely something I would wish for as my Playstation gaming console.
 

The Most Amazing PS3 Case Mod Ever, or a Big Waste of a PS3?

800°
309w ago - If you're an Alien fan, this may be the most amazing PS3 case mod ever. If not, this little homemade horror may seem like the biggest waste of a PlayStation 3 console ever.

To quote: The tattoo artist/case modder responsible for this creation used (and burned himself with) super heated epoxy putty and Games Workshop's Chaos Black paint for the finish. He had to settle for a layer of gloss instead of sanding it – it sounds (and looks like) a pain to smooth out.

The sculpt is as hard as a metal casting and permanently welds itself to everything, especially the plastic top. And it's only on the top panel and door so he can switch it out if he gets a new one.

And if anyone's interested, this is how I explained it to him; It takes ALOT more work than a portrait tattoo, which I would charge $300 for. So if I had to do something like this again... $300.
 

Customized 'Homicide' PS3 Case Mod is Bloody Awesome

350°
311w ago - This brutal PS3 Mod is entitled 'Homicide' and rightly so, for it has blood stains all over its clean white cover and simply looks like it was a witness to some awfully ruthless crime.

To quote: It is a wonderful addition to all the different PS3 Mods we have seen before and bloody awesome.

The creative mod for the PlayStation 3 was created by Jerry Thampan, and he goes on to explain its development:

...my ps3 that i customized. airbrushed white, blood done w/ red paint put into a spoon and drawn in, then clear coated twice...

I salute Jerry for his imagination and creativity. He also mentioned that some PS3 accessories and peripherals with the same blood stained design will be coming soon.

I guess this kind of mod brings the violence we see in the video games of today outside as well... but no harm done.
 

PS3 External WiFi Antenna Mod to Boost Signal Strength & Range!

550°
312w ago - Today mx24 dropped us an e-mail to let us know of a new PS3 modification he has posted at Spanish Web site Elotrolado (linked above).

In summary, he has added a SMA connector to his Sony PlayStation 3 console and as a result he was able to increase the WiFi signal from 20% to 52%.. over a 25% jump!

Below is a picture of the finished PS3 External WiFi Antenna Mod, and also 'before' and 'after' pics of the Internet Connection screens.

To quote in part, roughly translated: Good, after several days of work and investigation, I have been able to replace one of the internal antennas wifi of ps3 (ANT0-WLAN) by 9 an external antenna of dbi, connected through connecting SMA, implanted in the back part of the console.

To comment that once with the materials in my power, and with the clear things on the way to act, this mod has not taken to me but of 30 minutes. Including the disassembling, implantation of the connector and final assembly of the machine.

We begin by the necessary materials:

1. a PS3 with board Wifi, that is to say, that our black has Wifi connection.

2. a Pigtail UFL to SMA female of 30 cm. (Between 10 and 15 Euros)

3. an antenna with male connection SMA; it has of all the powers, from 5 dbi to 50. (from 5 Euros)
 
Sponsored Links

Sponsored Links






Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News