Sponsored Links

Sponsored Links

 

SPIway: A Teensy++ 2.0 SPI PS4 Flasher for PlayStation 4 Arrives

50°
55w ago - Following up on NORway, today PlayStation 4 developer judges released SPIway followed by v0.2 which is a Teensy++ 2.0 SPI PS4 Flasher WIP for PlayStation 4.

Download: [Register or Login to view links] / [Register or Login to view links]

SPIway is a Teensy++ 2.0 SPI Flasher tool with support for dumping MX25L25635FMI-10G which is the main memory of the PS4, and of course the MX25L1006E and W25X10CL flash circuits are both found in the PS4 console. This is an update to his well known NORway project.

Changelog:

  • (v0.20) Added support for MX25L1006E and W25X10CL.

SPIway - Teensy++ 2.0 SPI flasher for PS4 Pinout

[Register or Login to view code]


 

Video: PS3 4.31 OFW to 4.30 Rogero v2.03 CFW with Flasher Guide

1300°
103w ago - Nearly two months after the previous update, today I have posted a guide and video on how to downgrade a PS3 4.31 OFW console (including CECH-300x slims) to 4.30 Rogero v2.03 CFW using a PS3 Hardware Flasher with no 3.55 needed.

Very easy tutorial. Follow the steps to downgrade a PS3, but when you get to the first step of the USB downgrading part after putting your PS3 into service mode, use Rogero 4.30 CFW v2.03 on the root of the USB with the lv2diag.self to downgrade instead of the 3.55.

So again, no 3.55 ever touches the PS3 during this whole setup! Doing this will also now allow CECH-300x models original slims to be downgraded to 4.30 CFW as long as it never touches 3.55

The whole reason for this was to find out if the E3 fits a CECH-400xx model super slim models, but all I needed was proof that you can downgrade from 4.31 to 4.30 CFW with a flasher.

So if any one out there has an E3 and a new super slim model please test this if it works! You can make back ups of the NOR incase it fails.

Here is proof you can but I still do...
 

Install Rebug PS3 CFW 4.21.1 on Any Version PS3 with Flasher

1300°
111w ago - Following up on the PS3 Factory 3.56 with Flasher news, French PlayStation 3 developer raymanvtwo has shared a way to install Rebug PS3 CFW 4.21.1 on any version PS3, however, it requires a PS3 Hardware Flasher, will format your HDD and may result in a permanently bricked console so be WARNED!

Below is a rough translation of the process, as follows: You will need just a flash, great care, attention and rigor.

This method will format the hard drive of your PS3, make sure to recover your important data. Also, you incur a risk of irreversible brick in case of bad handling. Neither I nor PS3-Addict can not be held responsible. If you are not able to follow this tutorial to the letter, thank you spend your way!

Firstly, ensure the validity of your dump, flow rebuilder is the best in the field. Also check that all your fichiez is a different size of 0 bytes (including bootloader_0). If there is a problem, it will help you out.

Now that you have your dump, to see if the offset 200 if you or IFI FI.I with HxD as hexadecimal editor. If you IFI,...
 

Video: E3 PS3 CFW v4.30 on PlayStation 3 Factory 3.56 with Flasher

1300°
111w ago - This weekend Spanish PS3 developer jubytoo has shared a video demo and the related files to allow those with a Factory 3.56 OFW (minimum) console and a PS3 Hardware Flasher to install the recently released E3 PS3 CFW 4.30 with no dongle required!

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links] (Mirror #2) / [Register or Login to view links]

Below is the demo video and details, roughly translated: CFW 4.30 GOT IN CONSOLE WITH FACTORY minimum firmware 3.56 (FLASHER NEEDED)

Those of you currently with minimum version 3.56 PS3 are in luck With the collaboration of Varicella and Luckymas we have installed CFW 4.30 E3 in such consoles.

Apart indicate that with these patches also apply to install CFW 4.30 E3 directly from any superior to 4.31 OFW no consoles also manufactures minimum version of 3.55 or less and saved the downgrade, without dongle, without...
 

PS3 ErmaC 4.30 CFW v1.1 - Cinavia Disabled, Flasher Users Only

1350°
111w ago - Several days ago we received word from a PlayStation 3 developer known as HDMadness of his PS3 ErmaC 4.30 CFW v1.0 Custom Firmware, which has since been tested, updated again and retested and now on version 1.1 with several bug fixes and [Register or Login to view links] protection disabled for those with PS3 Hardware Flashers only.

Warning: Although tested, it is still advised that only users with PlayStation 3 Hardware Flashers attempt to install this PS3 Custom Firmware or you may end up bricking your PS3 console!

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror)

PUP MD5: 198CA3EA016EA5855988D40F158E1F13

From the included ReadMe File: ErmaC 4.30 CFW v1.1

  • More Stable than any other 4.30 CFW out there (Tested with numerous PS3, slim and phat models)
  • Can run games signed with...

 
Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links






Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News

Sponsored Links