To quote: GlitchSkeet: is another bitstream written specifically for the ProgSkeet flasher, which will allow it to operate as a Glitcher like the many Glitch-Chips out there now that are used to perform the Reset Glitch Hack on the XBox 360 console.
The GlitchSkeet Bitstream currently have support for only the "Trinity/Slim" XBox 360 board model, It may need some more tweaking as well as adding support for other XBox 360 board models in later releases as time allows.
But anyway, all Skeeters/ProgSkeet owners have the right to test this Bitstream as it is in its current state.
Compatibility: This Bitstream is compatible with ProgSkeet v1.1 Crystal Blue only, ProgSkeet v1.0 Crystal White won't work.
Preparation: Short R12 and R9, Open R11 and R10
GP5 = I2C_SCL
GP6 = I2C_SDA
Adr0 = CPU_RST (you must add a Capacitor of 220pf/230pf/270pf between Adr0 & Ground)
Adr2 = POST_OUT1
Adr4 = DEBUG PIN / LED
N.B: the Injectus Jtag USB programmer is needed in order to update ProgSkeet with this Bitstream.
Credits to uf6667, Ago, bmx, nice69 and to all ProgSkeet Team members and testers.
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!
ok first off i would like to say hello this is my first post here at ps3news and i am excited to be involved in any projects. that being said, would it work if you take the same model ps3's one with firmware 3.7 and the other at 3.55 and dump the 3.55 nand firmware and write it to the 3.7 nand chip using something like INFECTUS or progskeet will that downgrade from 3.7 to 3.55? or is there more details about it i need to know/edit?