Sponsored Links

Sponsored Links

Video: PS3 E3 Flasher PSN Online Demo is Released


Sponsored Links
172w ago - Today the E3DIY Team has made available a PSN online demo video of their PS3 E3 Flasher going on PlayStation Network and Sony's PlayStation Home with a modified PlayStation 3 console.

To quote: Clear up doubt, E3 FLASHER dual boot, 3.7 play PSN and 3.55 play HD game

After we release dual boot video, most player love it and also with some doubt. We understand, so today release a new video, and do some clarification.

1: E3 FLASHER not only a flasher, but with perfectly extension because integrated lots of interface, we will release more useful function later, all will be free just like we release golden finger function on E3 card reader.

2: E3 FLASHER can be upgrade from PC USB or TF card, very simple.

3: E3 FLASHER dual boot need 2 harddisk, one for 3.7 , another for 3.55. if you use only one HD, it will be required format everytime.

We will release a kit include ESATA station for you switch harddisk. (support 2.5 and 3.5' DISK)

4: At present, on nand flash console, it need solder wire. And no dual boot function because no 256M NAND FLASH ON E3 FLASHER.

On nor flash fat console, it need solder wire , and include dual boot function. On slim console, it no need solder wire but need solder some point.it is easy can be done in 3min. (don't misunderstand no solder wire means no solder)

5: We will release 2 new version E3 FLASHER at the end of this month.

One is 256M nand flash on board and with CLIP, to get dual boot and no solder function. Another is same as present E3 FLASHER but with CLIP, so all nor flash console no need any solder at that time. (sure cost will higher)

6: If all go well, we will release official picture and retail price on this Wednesday !

Update: E3 Flasher is a special device to help you program NAND and NOR flash memory. It supports all electronic device like DVD/BD/PS3/WII/XBOX360/MP3/MP4/Table PC which has NAND or NOR flash memory. Below are the official specs and pricing details alongside some pictures HERE and the E3 Flasher Installation Manual, as follows:

E3 Flasher = The world's first Dual-Boot, with simple 1 key operation = Surprising Arrival!

Device features:

  • Dual Boot 3.7OFW and 3.55CFW on same PS3
  • Downgrade 3.7 to 3.55 in 5min
  • 16M NOR FLASH ON board
  • 3 save MODE, can save data in TF, NOR FLASH on board and PC HD
  • 1 KEY operation, simple is best
  • Upgradable from TF card or PC USB
  • Compatiable all device like PS3/WII/XBOX360/MP3/DVD/BD/MP4/Table PC which has NAND or NOR flash memory.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • E3 flasher Limited version includes 8 accessory, suggested retail price $88 USD, total production run only 3000 units!








Q1: What's the E3 flasher Limited?

The E3 Flasher Limited is an universal programmer for all NAND/NOR flash device. It support PS3 slim console better because E3 flasher limited has 16M NOR flash memory, and with soft board to connect SLIM console easier, and also this limited version include 8 accessory like ESATA STATION. Sure it also support NAND flash console & device.

Q2: How about installation for fat and slim ps3 console?

The limited version need solder 34 wires on NAND FLASH FAT CONSOLE, it need use E3 LINKER.
The limited version need solder 50 wires on NOR FLASH FAT CONSOLE,it need use E3 LINKER.
The limited version need solder some points on NOR FLASH SLIM CONSOLE, no need any wire.

Q3: How many Harddisk we need? What function with E3 Esata Station?

As fact, you no need any extra HD because you can take out ps3 internal HD and put into E3 esata station. It will play like internal HD. Every time if you change FW, you will be required fomat and upgrade. So if you want get more function like dual boot and fast switch FW function, you need prepare another HD for another FW, just like you will get 3.7HD for 3.7FW, 3.55HD for 3.55FW, all will be regards as internet HD. With E3 esata station, the internal HD size can be MAX to 2.5T, compatiable 2.5&3.5' HD with MAX to 3G speed , and also works 4GB+ game well ,this means no need USB HD anymore.

Q4: If we will get problem with PSN if switch to 3.7?

Some guy say there has unique ID inside original PS3 NOR FLASH, so it will get problem if you choose another NOR FLASH memory. We don't think so because you can keep original PS3 NOR FLASH with 3.7OFW, so even you connect to PSN, it will find you are original, change nothing! Sure you can keep 3.55CFW on E3 NOR FLASH.

Q5: Do we need any software and PC?

No, you no need install any software, no need any PC to operation. You get all function on E3 FLASHER itsself. just press key on E3 FLASHER COVER BOARD and wait few min or few second..

Q6: If PS3 upgrade to new firmware, does E3 FLASHER works again?

We can't promise but will do best to work and provide to all free, you should trust E3DIY team.

Q7: Which version PS3 can downgrade and dual boot?

We find all FAT console works , most slim console works even include some new slim console which come with 3.56+ original FW. We find 3000X version console can program correctly but can't downgrade and dual boot, we will do best to work it out and provide to all free.






Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew releases!

Comments 720 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles.
 
#680 - k9inpoop - 41w ago
k9inpoop's Avatar
(i think) it was 5.00 m33 and it took me awhile to find that firmware online still but be careful because i read that it might mess up your psp but i had no problem with it at all and the tut for the jig app is this right here: [Register or Login to view links]

k9inpoop

#679 - buckchow - 41w ago
buckchow's Avatar
Hi! Do you know exactly which CFW you had on the PSP? I spent hours the other day repeatedly testing the original and Nabnab-modified versions of PS3Jig without success from my "fat" PSP.

I don't remember the exact CFW on the PSP at 6.60, but at 5.50 I used GEN-D3. After I tried everything on the fat PSP, I tried on a slim 2000-series unit without any luck either. I tried different USB cables in combination with everything and still nothing happened.

I just found an older service mode BIN for the E3 card reader and tried that, but the E3 still won't turn blue in the PS3.

#678 - k9inpoop - 41w ago
k9inpoop's Avatar
well i had the same problem with the 5 double beeps brick on my slim ps3 when i changed it back to a CEX machine *no pun intended lol jk* from a DEX machine and i used a first gen psp that i downgraded to the right firmware for the app to work right and i just used the ps3jig app and it got it into service mode and i fixed that brick by myself and that scared the crap out of me when i bricked it >.<

it took me like two weeks just to figure that out i tried using the ps3jig app on other versions of my psp but it said that it was waiting for the ps3 to be connected and just hanged there forever

k9inpoop

#677 - buckchow - 41w ago
buckchow's Avatar
I'm following [Register or Login to view links] for the 5 double beep brick but my E3 card reader won't turn blue when I power up the PS3 and I can't get it into service mode.

The E3 should turn orange, then blue and a few seconds later the PS3 should shut down. Instead, the E3 turns orange, then turns off, and a minute or two later the PS3 eventually shuts down. Someone else with the same problem made a video showing the problem:





The E3 card reader turns blue when I drag e3downgrade 12.03.bin to the upgrader part of it, so it seems to be flashing okay. In addition to using the E3 device, I tried a couple of PSPs running PS3Jig and those both hung on the driver started message.

Anybody have any idea why the E3 card reader won't work properly in the PS3? It's a CECHA01 if that makes any difference.

#676 - PS3 News - 44w ago
PS3 News's Avatar
To quote, roughly translated: 2014-02-19:

The new E3 OS 2.1 and E3 Manager 2 release, all users will have the following functions after upgrade to E3 OS 2.1 and E3 Manager 2.0:

1. One key install official PKG file
2. PS1 game support
3. BD MOVIE ISO support to play directly
4. DVD MOVIE ISO support to play directly
5. Further improve the support folder format PS3 games

E3TEAM will add the following new function in the next upgrade E3 OS 2.2, and more new features do please look forward to!

1. Enhance the performance of E3 ODE PRO
2. Install Unofficial PKG file
3. PSN game support

E3TEAM as PS3 ODE industry pioneer,will vigorously advance and innovate,bring even more enriching experience for all users.

Download: E3 Manager 2.0 and Manual / E3 OS 2.1

Rough translation: About:

1) We are pleased to announce the long-awaited E3 OS 2.0 released. All users upgrade to E3 OS 2.0 will have the following functions:

1:The official version of 4K 4.55 solution. A special E3 boot disc to support user's original boot disc and all PS3 games in its HDD. The users can burn the BD E3 boot disc by themselves or give the generated ISO file to other guy to burn. (The supported original boot disc is listed in the keys file, this content can be added)

Please note: this function is only useful for 4K 4.55 user, other E3 OS 2.0 user play game is same as before, no need E3 boot disc.

2: Support folder format of PS3 games. Users can play games without converting into ISO game on PC. (EBOOT need original or re-signed)

3: Modified EBOOT can be run with E3 ODE PRO after re-signed in folder format game, just copy the eboot to the right directory to run. (E3TEAM will release a specially one-key re-sign software later)

E3TEAM is working hard to update one key installation PKG file feature, due to the delay of fixing 4K 4.55. It will be released in E3 OS 2.1 after testing well.

E3TEAM will provide solutions without the need of external USB drive to play PS3 game, so stay tuned!

Meanwhile, because of commercial confidentiality, E3TEAM's exclusive release of new features for how to achieve the way will be reserved. In the 4K 4.55 solution as an example, E3TEAM find the solution in 3 days after 4.55 released, and then release the testing video. Since the method of switching boot disc is commercial secrets, so we have reservations in the video.

Facts have proved that after E3TEAM released E3 OS 2.0 BETA version, other teams are starting to follow E3TEAM solution. For this reason, if the user causes misunderstanding, E3TEAM can only feel sorry. But in the future we will continue to use the functions reserved demo mode, please understand!

E3TEAM will do our best to provide the best user experience. All issues of interest to
the user, E3TEAM is trying to solve, and will be reflected in future product updates.

2) The new E3 OS 2.1 and E3 Manager 2 release, all users will have the following functions after upgrade to E3 OS 2.1 and E3 Manager 2.0:

1: One key install official PKG file
2: PS1 game support
3: BD MOVIE ISO support to play directly
4: DVD MOVIE ISO support to play directly
5: Further improve the support folder format PS3 games

E3TEAM will add the following new function in the next upgrade E3 OS 2.2, and more new features do please look forward to!

1: Enhance the performance of E3 ODE PRO
2: install Unofficial PKG file
3: PSN game support

E3TEAM as PS3 ODE industry pioneer, will vigorously advance and innovate, bring even more enriching experience for all users.

Update: 2014-03-04

We are pleased to inform you, the user's long-awaited one key install the unofficial PKG file function test is completed, will be officially released in 2-3 days. E3TEAM is currently stopped developing other functions and products, go to all lengths to bypass the 4K 4.55 verification with other ways.

We hope to publish a more convenient and simple way in a few months, please wait patiently. In addition, the new E3 official English forum open soon, will provide more assistance for English users.

Update #2: 2014-03-06

The one key install unofficial PKG software released, all E3 ODE PRO user can run it by copy this software, please read the manual. At the same time, the E3 Global Forum officially running, all E3 users can get help through this forum.

Download: E3-PKGINSTALL.zip

Update #3: 2014-03-27

The latest E3 ODE PRO Keys updates, support more games as a boot disc. E3TEAM has been hard at work on a better way to bypass the 4K 4.55 certification, please wait patiently.

Download: keys.zip

From Joonie86: It seems that if you make this homebrew with any fixed pkg in ISO format, I assume this will work on any ODEs. Unfortunately, I can't make SWAP disc for my 4k /OFW 4.55 at the moment, I can't test this.

Wondering if anybody wants to confirm this. If this this working, pkg install will be a lot easier than using IDC, multiman or other file manager.

 

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News