Sponsored Links

Sponsored Links

Video: PS3 E3 Flasher PSN Online Demo is Released


Sponsored Links
151w ago - Today the E3DIY Team has made available a PSN online demo video of their PS3 E3 Flasher going on PlayStation Network and Sony's PlayStation Home with a modified PlayStation 3 console.

To quote: Clear up doubt, E3 FLASHER dual boot, 3.7 play PSN and 3.55 play HD game

After we release dual boot video, most player love it and also with some doubt. We understand, so today release a new video, and do some clarification.

1: E3 FLASHER not only a flasher, but with perfectly extension because integrated lots of interface, we will release more useful function later, all will be free just like we release golden finger function on E3 card reader.

2: E3 FLASHER can be upgrade from PC USB or TF card, very simple.

3: E3 FLASHER dual boot need 2 harddisk, one for 3.7 , another for 3.55. if you use only one HD, it will be required format everytime.

We will release a kit include ESATA station for you switch harddisk. (support 2.5 and 3.5' DISK)

4: At present, on nand flash console, it need solder wire. And no dual boot function because no 256M NAND FLASH ON E3 FLASHER.

On nor flash fat console, it need solder wire , and include dual boot function. On slim console, it no need solder wire but need solder some point.it is easy can be done in 3min. (don't misunderstand no solder wire means no solder)

5: We will release 2 new version E3 FLASHER at the end of this month.

One is 256M nand flash on board and with CLIP, to get dual boot and no solder function. Another is same as present E3 FLASHER but with CLIP, so all nor flash console no need any solder at that time. (sure cost will higher)

6: If all go well, we will release official picture and retail price on this Wednesday !

Update: E3 Flasher is a special device to help you program NAND and NOR flash memory. It supports all electronic device like DVD/BD/PS3/WII/XBOX360/MP3/MP4/Table PC which has NAND or NOR flash memory. Below are the official specs and pricing details alongside some pictures HERE and the E3 Flasher Installation Manual, as follows:

E3 Flasher = The world's first Dual-Boot, with simple 1 key operation = Surprising Arrival!

Device features:

  • Dual Boot 3.7OFW and 3.55CFW on same PS3
  • Downgrade 3.7 to 3.55 in 5min
  • 16M NOR FLASH ON board
  • 3 save MODE, can save data in TF, NOR FLASH on board and PC HD
  • 1 KEY operation, simple is best
  • Upgradable from TF card or PC USB
  • Compatiable all device like PS3/WII/XBOX360/MP3/DVD/BD/MP4/Table PC which has NAND or NOR flash memory.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • E3 flasher Limited version includes 8 accessory, suggested retail price $88 USD, total production run only 3000 units!








Q1: What's the E3 flasher Limited?

The E3 Flasher Limited is an universal programmer for all NAND/NOR flash device. It support PS3 slim console better because E3 flasher limited has 16M NOR flash memory, and with soft board to connect SLIM console easier, and also this limited version include 8 accessory like ESATA STATION. Sure it also support NAND flash console & device.

Q2: How about installation for fat and slim ps3 console?

The limited version need solder 34 wires on NAND FLASH FAT CONSOLE, it need use E3 LINKER.
The limited version need solder 50 wires on NOR FLASH FAT CONSOLE,it need use E3 LINKER.
The limited version need solder some points on NOR FLASH SLIM CONSOLE, no need any wire.

Q3: How many Harddisk we need? What function with E3 Esata Station?

As fact, you no need any extra HD because you can take out ps3 internal HD and put into E3 esata station. It will play like internal HD. Every time if you change FW, you will be required fomat and upgrade. So if you want get more function like dual boot and fast switch FW function, you need prepare another HD for another FW, just like you will get 3.7HD for 3.7FW, 3.55HD for 3.55FW, all will be regards as internet HD. With E3 esata station, the internal HD size can be MAX to 2.5T, compatiable 2.5&3.5' HD with MAX to 3G speed , and also works 4GB+ game well ,this means no need USB HD anymore.

Q4: If we will get problem with PSN if switch to 3.7?

Some guy say there has unique ID inside original PS3 NOR FLASH, so it will get problem if you choose another NOR FLASH memory. We don't think so because you can keep original PS3 NOR FLASH with 3.7OFW, so even you connect to PSN, it will find you are original, change nothing! Sure you can keep 3.55CFW on E3 NOR FLASH.

Q5: Do we need any software and PC?

No, you no need install any software, no need any PC to operation. You get all function on E3 FLASHER itsself. just press key on E3 FLASHER COVER BOARD and wait few min or few second..

Q6: If PS3 upgrade to new firmware, does E3 FLASHER works again?

We can't promise but will do best to work and provide to all free, you should trust E3DIY team.

Q7: Which version PS3 can downgrade and dual boot?

We find all FAT console works , most slim console works even include some new slim console which come with 3.56+ original FW. We find 3000X version console can program correctly but can't downgrade and dual boot, we will do best to work it out and provide to all free.






Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 692 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

k9inpoop's Avatar
#682 - k9inpoop - 20w ago
i think that you might have to get different versions of FW for the psp i know it was a FW that only a PHAT psp was able to go safely and you might have to try a different version of the downgrade files or was it the Lv2diag.self file... (i forgot it was one of those i couldn't get working with ps3jig) for a while and then after i tried everything the last one i tried worked (i even tried it on a 1.0 Phat downgraded psp lol)

k9inpoop

buckchow's Avatar
#681 - buckchow - 20w ago
Thanks, I tried that but still can't get any activity from PS3Jig after the USB driver started message. At least the PSP never bricked with me bouncing around between 5.00, 5.50, 6.20, and 6.60, but the PS3 is still sad and dead.

k9inpoop's Avatar
#680 - k9inpoop - 20w ago
(i think) it was 5.00 m33 and it took me awhile to find that firmware online still but be careful because i read that it might mess up your psp but i had no problem with it at all and the tut for the jig app is this right here: [Register or Login to view links]

k9inpoop

buckchow's Avatar
#679 - buckchow - 20w ago
Hi! Do you know exactly which CFW you had on the PSP? I spent hours the other day repeatedly testing the original and Nabnab-modified versions of PS3Jig without success from my "fat" PSP.

I don't remember the exact CFW on the PSP at 6.60, but at 5.50 I used GEN-D3. After I tried everything on the fat PSP, I tried on a slim 2000-series unit without any luck either. I tried different USB cables in combination with everything and still nothing happened.

I just found an older service mode BIN for the E3 card reader and tried that, but the E3 still won't turn blue in the PS3.

k9inpoop's Avatar
#678 - k9inpoop - 20w ago
well i had the same problem with the 5 double beeps brick on my slim ps3 when i changed it back to a CEX machine *no pun intended lol jk* from a DEX machine and i used a first gen psp that i downgraded to the right firmware for the app to work right and i just used the ps3jig app and it got it into service mode and i fixed that brick by myself and that scared the crap out of me when i bricked it >.<

it took me like two weeks just to figure that out i tried using the ps3jig app on other versions of my psp but it said that it was waiting for the ps3 to be connected and just hanged there forever

k9inpoop

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News