Sponsored Links

Sponsored Links

Video: PS3 E3 Flasher PSN Online Demo is Released


Sponsored Links
171w ago - Today the E3DIY Team has made available a PSN online demo video of their PS3 E3 Flasher going on PlayStation Network and Sony's PlayStation Home with a modified PlayStation 3 console.

To quote: Clear up doubt, E3 FLASHER dual boot, 3.7 play PSN and 3.55 play HD game

After we release dual boot video, most player love it and also with some doubt. We understand, so today release a new video, and do some clarification.

1: E3 FLASHER not only a flasher, but with perfectly extension because integrated lots of interface, we will release more useful function later, all will be free just like we release golden finger function on E3 card reader.

2: E3 FLASHER can be upgrade from PC USB or TF card, very simple.

3: E3 FLASHER dual boot need 2 harddisk, one for 3.7 , another for 3.55. if you use only one HD, it will be required format everytime.

We will release a kit include ESATA station for you switch harddisk. (support 2.5 and 3.5' DISK)

4: At present, on nand flash console, it need solder wire. And no dual boot function because no 256M NAND FLASH ON E3 FLASHER.

On nor flash fat console, it need solder wire , and include dual boot function. On slim console, it no need solder wire but need solder some point.it is easy can be done in 3min. (don't misunderstand no solder wire means no solder)

5: We will release 2 new version E3 FLASHER at the end of this month.

One is 256M nand flash on board and with CLIP, to get dual boot and no solder function. Another is same as present E3 FLASHER but with CLIP, so all nor flash console no need any solder at that time. (sure cost will higher)

6: If all go well, we will release official picture and retail price on this Wednesday !

Update: E3 Flasher is a special device to help you program NAND and NOR flash memory. It supports all electronic device like DVD/BD/PS3/WII/XBOX360/MP3/MP4/Table PC which has NAND or NOR flash memory. Below are the official specs and pricing details alongside some pictures HERE and the E3 Flasher Installation Manual, as follows:

E3 Flasher = The world's first Dual-Boot, with simple 1 key operation = Surprising Arrival!

Device features:

  • Dual Boot 3.7OFW and 3.55CFW on same PS3
  • Downgrade 3.7 to 3.55 in 5min
  • 16M NOR FLASH ON board
  • 3 save MODE, can save data in TF, NOR FLASH on board and PC HD
  • 1 KEY operation, simple is best
  • Upgradable from TF card or PC USB
  • Compatiable all device like PS3/WII/XBOX360/MP3/DVD/BD/MP4/Table PC which has NAND or NOR flash memory.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • E3 flasher Limited version includes 8 accessory, suggested retail price $88 USD, total production run only 3000 units!








Q1: What's the E3 flasher Limited?

The E3 Flasher Limited is an universal programmer for all NAND/NOR flash device. It support PS3 slim console better because E3 flasher limited has 16M NOR flash memory, and with soft board to connect SLIM console easier, and also this limited version include 8 accessory like ESATA STATION. Sure it also support NAND flash console & device.

Q2: How about installation for fat and slim ps3 console?

The limited version need solder 34 wires on NAND FLASH FAT CONSOLE, it need use E3 LINKER.
The limited version need solder 50 wires on NOR FLASH FAT CONSOLE,it need use E3 LINKER.
The limited version need solder some points on NOR FLASH SLIM CONSOLE, no need any wire.

Q3: How many Harddisk we need? What function with E3 Esata Station?

As fact, you no need any extra HD because you can take out ps3 internal HD and put into E3 esata station. It will play like internal HD. Every time if you change FW, you will be required fomat and upgrade. So if you want get more function like dual boot and fast switch FW function, you need prepare another HD for another FW, just like you will get 3.7HD for 3.7FW, 3.55HD for 3.55FW, all will be regards as internet HD. With E3 esata station, the internal HD size can be MAX to 2.5T, compatiable 2.5&3.5' HD with MAX to 3G speed , and also works 4GB+ game well ,this means no need USB HD anymore.

Q4: If we will get problem with PSN if switch to 3.7?

Some guy say there has unique ID inside original PS3 NOR FLASH, so it will get problem if you choose another NOR FLASH memory. We don't think so because you can keep original PS3 NOR FLASH with 3.7OFW, so even you connect to PSN, it will find you are original, change nothing! Sure you can keep 3.55CFW on E3 NOR FLASH.

Q5: Do we need any software and PC?

No, you no need install any software, no need any PC to operation. You get all function on E3 FLASHER itsself. just press key on E3 FLASHER COVER BOARD and wait few min or few second..

Q6: If PS3 upgrade to new firmware, does E3 FLASHER works again?

We can't promise but will do best to work and provide to all free, you should trust E3DIY team.

Q7: Which version PS3 can downgrade and dual boot?

We find all FAT console works , most slim console works even include some new slim console which come with 3.56+ original FW. We find 3000X version console can program correctly but can't downgrade and dual boot, we will do best to work it out and provide to all free.






Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew releases!

Comments 719 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles.
 
#109 - racer0018 - 166w ago
racer0018's Avatar
I emailed them and they told me that there are going to release a new flasher for the e3. However I am wondering if you don't use to clip with it if you still can have he dual boot. I have emailed them the question and I am awaiting an answer. Thanks and I will keep you posted.

The update that I got was the same as ps3 news got. So I guess I will have to wait into I get mine to see if I can get to work. Thanks

#108 - cfwprophet - 166w ago
cfwprophet's Avatar
Ok why we need to solder some wire if the second pcb hase a owen NOR flash onboard and stores/boots the second fw of this ? The hell, the clip fits on the orig NOR and inject the data of onboard NOR so we can dual boot. Im no tecnican pro but that sounds stupid, that you have to solder some wire for dual boot.

#107 - LTJerry - 166w ago
LTJerry's Avatar
I am willing to send a sample for review but I got replied - the fist shipping of E3 flasher has dual boot, so I have no idea what the hell's going on!

#106 - elser1 - 166w ago
elser1's Avatar
i agree.. i wanted it for dual fw.. its still ok though i guess. i will be waiting to see what happens when its actually out and people on here tell how it is etc before deciding if ill buy one or not.. thanks for the update!!

#105 - HeyManHRU - 166w ago
HeyManHRU's Avatar
Yeah, that kinda stinks. Most users were getting the E3 to dual boot between firmwares, hopefully they'll come up with a solution soon.

 

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News