Sponsored Links

Sponsored Links

Video: PS3 3Key Optical Blue-ray Drive Emulator Demo Arrives

Sponsored Links
103w ago - Following up on the previous update, today Max Louarn and Paul Owen's product marketeer Gary Wayne Bowser (aka GaryOPA) has made available a 3K3y demonstration video with details below.

Download: [Register or Login to view links] / [Register or Login to view links] by jarmster (Note: Leave a USB stick installed when you run the app, it puts a 1kb file called 3dump.bin on the stick containing the decrypted drive keys. Run the app, triple beep + red flashing led... power down with front button = no good but it dumps the key. To get your root_key you must go back to 3.55, funny fact... when using the 3k3y dumper on 3.55 it includes the eid_root_key. ) / [Register or Login to view links] / [Register or Login to view links] / [Register or Login to view links] by haz367 / [Register or Login to view links] by 3Key

3k3y Ripp3r v1.01 Setup and User Guide: Windows software for ripping/decrypting/reencrypting PS3 disks. The user manual is included in the archive.

Changelog [2013-02-01]:

  • Fixed a bug that affected encryption/decryption of very large files.

From zecoxao: I bet people didn't even touch the implementation of libeeid that naehrwert left us, and then these guys come, use flat_z's code to get the eid_root_key on hackables, and grab the necessary part of the code from [Register or Login to view links] to generate the eid4_key from it and decrypt the eid4. Bunch of freaking losers.

People, if you're that desperate to get the drive key (which is in eid4) just memdump eEID, get your eid_root_key with flatz's package and use my program which is adapted from naehrwert's code. you can even see for yourselves what's happening in the code. Don't forget to rename the eEID you get from your console's NOR/NAND to eid (without an extension) and place it on eid folder. same as key and iv (split them up with a hex editor).

You can then try that program and compare your decrypted eid4 with the pkg's dump, and realize it's the same crap.

Here we can see the keys used by the ripper (taken from: ps3devwiki.com/wiki/BD_Drive_Reverse_Engineering#Program and ps3devwiki.com/wiki/BD_Drive_Reverse_Engineering#Information_about_EID4):

[Register or Login to view code]

The keys are in eid4, and yes, we DO need to decrypt it, or else Sony would be the biggest bunch of retards.. the eid4 key is used to verify the cmac hash of the first 0x20 bytes. Naehrwert's code seems to prove this:

[Register or Login to view code]

omac1 basically spits out the digest of the secure communication channel keys. if you compare the digest with the last 16 bytes of eid4, it should match

Corrected some info. and apparently i was mistaken when i thought that 3Dump.bin contained the eid4 ENcrypted. it contains in fact eid4 DEcrypted. You still need to auth with the bd drive. that's the part Cobra/E3 figured out. we can do this normally with hacked consoles, but not with unhacked consoles.

So the ODE dumper package dumps the DEcrypted eid4, correct? now i understand. i was confused because i thought you said the eid4 ENcrypted was the same as 3Dump.bin.

3K3y Key Dumper

Here is the Key dumping Application to on a Ps3 with CFW. This will only work for Fat consoles. You must have a FAT32 USb stick in the first port on your PS3, it will generate a file called 3Dump.bin This is what goes on your micro sd card, or loaded into the Ripper application.

Please note you need Peek and Poke enabled in your CFW to run this app, this is usually enabled by default. Cobra CFW doesn't allow you to run this file so you will need to flash to something else if you are on this.

From jarmster: The eid4 from running libeeid is a decrypted dump. The 3dump.bin is exactly the same. The eEID_Dumper.pkg dumps the encrypted eid4. And from the wiki: EID4 is of size 0x30 bytes: 0x0-0xf bytes = 1st key, 0x10-0x1f - 2nd key, 0x20-0x2f - CMAC-OMAC1 of EID4.

From haz367:

[Register or Login to view code]

should be different.. correct..?

From zadow28 on the 3K3y PKG file: pastebin.com/79V2KdTK

I'm not into VS very much, maybe the devs can have an look. It's the visual source/assembly code for the x3key ps3 software for pc. got there keys and even shows there iso disc codes, plus a lot more. I'm not an visual expert, so maybe there are some visual experts here. shows how the x3key acts like an Bulk. etc

The iso for x3key are crypted, so they only play with there tool.. the source for encrypting the iso are in there too.

From Abkarino (via Zadow28) comes the 3K3y Ripper (PC Software) hacked source code recovered, as follows:

You could build your own hardware interface to connect PS3 BD-ROM Drive to your PC to rip your games. The 3K3y special hardware is in only a cheap PATA To USB converter board with some modifications, and you can do it yourself. Also you could directly connect your PS3 Drive to your PC by soldering it to PATA bus a.k.a IDE cable and modify the power socket only. You can use the old leaked BD-ROM drive service manual for pinout (ps3devwiki.com/wiki/ODE).

Download: [Register or Login to view links] (Password: Abkarino) / [Register or Login to view links] (Mirror: Password Removed)

This is a quick and dirty release for 3K3Y Ripper application including the full recovered source code. So you can build/modify your own version. All you will need is: .Net Framework Runtime v4.0

Message to 3K3Y Team: Do not stole glevand's work again Also do not forget to protect you applications using a good .Net protector like .Net Reactor to prevent me or any body else from recovering your codes. Hope that will help someone to do something useful in the future.

Abkarino (Mohammed Hassan)

To quote: Click the above-picture (HERE) to see a close-up view of the actual 3k3y BETA PCBoard, (the case on the PHAT PS3 used for demo, does not need to be cut-away, that was done on purpose for the video shown below), and the small black box to left is the usb hdd port, power and 3k3y LCD screen interface to select the PS3 ISO on your external USB HDD similar in style to their famous original X360key ODD emulator.

Now sit back and enjoy the video (download it [Register or Login to view links]) made by our Anonymous 3k3y Beta Tester (BTW, Many Thanks Whomever You Are!), as you nurse your video gaming body back into action from all those Happy New Year parties last night!

Below are a few more 3K3y videos / mirrors for those interested as well, from their page:

2013-01-03: 2 new 3k3y videos

As we are very close to shipping we decided to release 2 more product videos. We aim to have one of these great devices in your PS3 by the end of the month!

3k3y is the state of the art of PS3 drive emulation from the defacto leaders in drive emulation.

Feature List

  • Play all PS3 games
  • Play all PS2/PS1 games*+
  • Plug n play installation
  • Compatible with all currently available OFW/CFW versions
  • Original 3k3y app for extracting drive key**
  • User friendly OSD interface for managing your 3k3y
  • Optional remote (compatible with Xk3y remote)
  • Powerful embedded Linux platform
  • Supports most popular file systems such as EXT2.3.4, Mac OS X and NTFS
  • Emulation and transparent passthrough modes
  • Both CPU and FPGA are fully in-system updatable
  • Sleek and beautiful Wifi interface***
  • Movie ISO playback+
  • Not manufactured in China****

* Requires compatible PS3.
** Currently fw =< 3.55 is required for extracting the drive key. After this the FW can be upgraded freely. This holds true for all ODEs, see below for more details
*** Requires Wifi dongle sold separately
**** That's why we can deliver despite CNY + This feature will be added in an upcoming firmware


Quantity 3k3y+Ripper 3k3y only Ripper Only Wifi dongle Remote

  • 1k and up USD63 USD52 USD13 USD10 USD20
  • 500pcs USD67 USD55 USD15 USD10 USD22
  • 250pcs USD70 USD60 USD15 USD12 USD25
  • 100pcs USD75 USD65 USD16 USD14 USD27

Retail Price: US $129.00 ( Ripoff Markup! )

  • PS3 3K3y (3Key) stock available now
  • 3K3y Fat Model version release on 2013-02-08 . Slim version will release soon
  • 3K3y PCB Kit
  • 3K3y Remote (optional)
  • 3K3y Ripper PCB (optional)

Products developed by our team members, such as Xk3y, Wode, and Wiikey Fusion have outsold products in direct competition by a factor. The same thing goes for many of our other products such as Qoob and Wiikey.

The question many people are asking about it compatibility with various firmwares and PS3 models. Let us state the facts here, which are true for 3k3y as well as any other PS3 ODE:

Key extraction

Currently a firmware <= 3.55 is required for drive key extraction. We are very close to completing a relatively user friendly hardware method for extracting keys from PS3's on any firmware. Until we have it working in a commercial environment we will not promote this as a feature, even though it is very likely to happen in the immediate future.

As of now there are no PS3 ODEs that works with a PS3 that cannot be put on 3.55 firmware for key dumping. Period.

Compatible models

3k3y was developed for the fat ps3, which is supported out of the box. Now when the hardware is finished we will start working on adapter boards for the Slim models which do not have the drive controller integrated on the motherboard.

Once that is done we will look into whether is it possible to make an adapter board for the Slims with integrated controller that can be installed with a reasonable effort.

Super Slim

Due to the size constraints and different interface (SATA instead of PATA) we have developed a super small hardware especially for the Super Slim model. Final testing and release will commence once we have hardware key extraction working.

ISO file format

3k3y, as well as any other sane ODE uses a full ISO file. Scene releases were in this format up until the jailbreak dongle came along. Currently it is more popular to release the decrypted file system, as it may be smaller than a full ISO.

However, decrypted file system backups lacks essential data necessary to emulate the disk properly and are very easy for Sony to detect on PSN. In fact Sony has made a public statement warning PSN users about this. We are currently looking into the possibility of creating software to recreate the ISO from decrypted dumps, but this is WIP.

Game Ripping

This is an essential feature as the full ISO is needed. We have high speed hardware that connects to Mac or PC and dumps a full size ISO in no time. Its right here and now.

An upcoming firmware for 3k3y will include in-system disk ripping, but disk ripping with 3k3y or any other ODE will be extremely slow compared to using our dedicated hardware.

To avoid delays and missing out on sales please contact us ASAP. Both 3k3y and Xk3y are time consuming and labor intensive to manufacture. We need timely forecasts to avoid disappointments.

Additionally, the first 3K3y ODE iSO release appears to have surfaced under the name PlayStation.All-Stars.Battle.Royale.READNFO.ISO.PS3-TL with details below from the PS3 NFO file:

[Register or Login to view code]

From CaptainCPS-X: Size difference between old ISOs and new ISOs - From my experience coding my personal (unreleased) disc reading library for Windows, from what I understand, I will assume that the size difference its because the ISO is not really created following the ISO9660/MODE1/2048 (+UDF/Joliet/...) standard, but probably created as ISO9660/MODE1/2352 (+UDF/Joliet/...) or BIN (binary). So each sector will have 'synchronization data', and 'Error Check Data', found on Discs to allow recovery / re-creation of sector data in case of Disc Surface damages and such.

Such 'extra' data located on ISO/MODE1/2352 BIN (binary) disc images is not so evident on regular old school CD (700mb) images, size of the ISO/MODE1/2048 version of it will always be less. I bet they didn't even include a .CUE file as well, since they are "probably" not following any standard.

Anyway, ISO9660 disc images in binary form should always be named .BIN and include a .CUE file. There is a probability that I am wrong, maybe it is some kind of new ISO that doesn't follow any Standards (I really doubt it ), but I will try to acquire the released "ISO" to verify it myself. I hope that if my theory is right, these release groups choose to release future disc images as BIN/CUE, just to avoid any confusion with already circulating ISOs.

Reason to Release new "ISO"s - I doubt that the reason of releasing such "ISO"s is because Sony could detect regular ISO/MODE1/2048 (LOL ). The Cobra Optic Drive Emulator, was probably designed to read data as the real BD-Drive reads it, so when it cannot find the original 'synchronization data', 'header', 'error check data', etc... it will most probably give read error.

Just to confirm my point, I made a custom disc image following ISO9660/MODE1/2352 standard of "BCES01435-[PlayStation All-Stars Battle Royale]", and the resulting size is 6.75 GB, very similar indeed to the one released by "TL" group. If I made the custom disc image as ISO9660/MODE1/2048 then the resulting size would be approx. 5.84 GB.

I just need to acquire one piece of the release made by "TL" and I will be able to confirm if the ISO is a BIN named and published incorrectly without proper CUE. The difference between their size is approx. 13.48% [ ((6.75 - 5.84) / 6.75) * 100 ]. So if this difference rate is same in all PS3 disc images ripped as ISO/MODE1/2352, then a 40 GB game would have approx. 5.39 GB more when saved as BIN/CUE. SeeYa!

Still can't get too excited at tearing apart a PS3 console, soldering tiny wires inside and requiring additional hardware to play PS3 games with the advent of PlayStation 3 Custom Firmware a few years ago though.

From zadow28 on the 3K3y PKG file: pastebin.com/79V2KdTK

I'm not into VS very much, maybe the devs can have an look. It's the visual source/assembly code for the x3key ps3 software for pc. got there keys and even shows there iso disc codes, plus a lot more. I'm not an visual expert, so maybe there are some visual experts here. shows how the x3key acts like an Bulk etc.

Finally, HERE is a 3K3y PS3Dec (alternative encryptor/decryptor) from bubba (aka red_meryl) for those interested!

From 3Key: 3k3y IRD files 2013-03-15 is a collection of IRD (Iso Rebuild Data) files for 3k3y. Use them to convert PSJB game dumps to full PS3 ISO.

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew releases!

Comments 105 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles.
#85 - PS3 News - 73w ago
PS3 News's Avatar
Below are some new details and pics from bubba / Scrano and video footage on the 3K3y ODDE Web Interface and more, as follows:


  • AES encryption in HW to allow playback of unencrypted ISOs.
  • Superslim adapters are in mass production.
  • Boot decrypted ISOs.
  • 698 IRD files for 672 game. (around 10 games a day)
  • App for android/ipod/ipad working = [Register or Login to view links] (you will need to use 01.99B6A firmware). You can choose to use the Web app or just your Ip and magic happens. See Web interface.
  • Superslim production devices = Done.
  • Passthru & emulation are working. Final test was update = Done and working.

The Web interface that you can use with any of your devices. Android/Ipod/Ipad/etc you can control all from there.

Here is the adapter install on 4Xxx, red & black go to main 3K PCB:

3k3ystart, 3k3y 4k Superslim Review and 3k3yhomebrew Videos by harryoke

There might be another way but this is how I achieved it. Before you start update the game via PSN. Then follow these steps:

1. download the pkg & edat fix (found on various forums)
2. extract pkg to a folder
3. replace edat file with the fixed one
4. place folder on usb/external (mine was BLES01717)
5. launch filemanger homebrew from 3k3y
6. copy folder from usb to dev_hdd0/game
7. turn off ps3 and put into recovery menu
8. restore filesytem
9. rebuild database and your done... enjoy free DLC working 100% online.

Another video for you showing the xmb iso selector ... No more having to choose the game/homebrew from the crystal display adaptor: 3k3y ISO menu test

PS1 games booting on 3k3y enjoy

Here is another video by harryoke showing a PSN game running in ISO format from external harddrive using 3K3y.

3k3y Running PSN HOTLINE MIAMI Game on External as .ISO

More sales propaganda from bubba: Seems to be a lot of confusion about when 3k3y will be ready for your model

3k3y team have figured out how to use the device without KEYs, which means you can use the device on OFW, tested up to 4.46 firmware. There are 2 motherboard types

  • 3k3y Fat, for PATA based consoles (fat consoles with the really wide ribbon cable coming off the DVD drive)
  • 3k3y-S (3k3y Sata Slim) for All other units, including Fat consoles which have a Sata dvd drive.

The Sata Fat consoles, and the 2000/2100 models have the Blu ray drive board INSIDE the Blu Ray drive. This means the 3k3y can sit in the middle and is solderless. The 2.5k, 3k, and 4k models all have the Blu Ray drive board inbuilt into the motherboard. The Blu Ray drive using just holds the motor, and laser.

The laser cable goes directly to the motherboard. For this reason you will need to solder the adapter board onto the motherboard. For this reason the 3k3y team have made 1 x main board for Sata based models, and are making 3 different adapter boards for these models. The adapter boards are just attachments (daughter boards if you will). Details of the progress are below:

3k3y Fat (aka 3k3y PATA) - Available


Works on models



3K3Y-S for Sata Phats, and 2000/2100 - ALMOST READY, ETA MID AUGUST


Works on:

CECHL (open to make sure its sata model, might be PATA)


CECH 20xxx
CECH 21xxx


REQUIRES SOLDERING to motherboard to attach the 3k3y to the drive interface

Works on:


CECH 25xxx
CECH 30xxx

3K3Y-S for super slim 400x models - In production - 12th of August

REQUIRES SOLDERING to motherboard to attach the 3k3y to the drive interface

Works on:


CECH 40xxx

Update: 3K3y: Firmware v2.00 Final (SATA/PATA) Released

Download: [Register or Login to view links]

You want Superlim PS3 support or a tight webinterface? You got it! See all the other most recent changes that come with the 3k3y fw 2.00 attached below:

Firmware 2.00 - This update is currently only for 3k3y Fat, and the New 3k3y for 4000 models. Do not update to this if you have a 3k3y for 2000 model (New firmware for 2000 models will come out in a couple of weeks when the new adapter boards are ready for this model)

  • This is 3k3y update and contains 2 x different FPGA updates.
  • 1 of the fpga updates is for Fat 3k3ys with PATA drives(this is in the 3KF FPGA folder)
  • 1 of the fpga updates is for the 3k3y-S for 4000 models (this is in the 3KS FPGA folder)
  • If you apply the update on the wrong motherboard type it will brick your device.

NOTE: You need to get the D1 of the original game you use as a boot disk (use the Ripp3r to view the IRD, its on Tab3 Authorizations and labelled data 1), put that in the 3Key.cfg and update

In the 3key.cfg you will see a line like this:

[Register or Login to view code]


Replace 'YOUR_GAME_DISK_D1' with the D1 for your game disk

NOTE2: I had to change the way the ISO Menu works, you must open the image full screen for 3K3y to select it.

3k3y Firmware UPDATE v2.00


1. Extract the files "rootfs", "uImage" , "fpga.vme" and "3key.cfg" (please use the appropriate fpga.vme for your 3k3y type)

2. Open 3key.cfg with Notepad and configure it if needed. If you do not wish to change the settings on your 3k3y then you do not need to edit OR update your 3k3y with this file, leave it out!

2.1 Add the files to the root folder of a Flash Drive or HDD. (Make sure to "eject" the drive properly from the PC, it may otherwise cause corrupt files)

3. Connect the Flash drive or HDD to your 3k3y remote and wait for the 3k3y to start the update.
3.1 The remote OLED will now display "UPDATING - PLEASE WAIT" for about 35 seconds. (Do not turn off your PS3 or disconnect the remote while updating. FPGA updates will take a little longer)

4. Once the update is completed, the OLED will display "UPDATE COMPLETE - RESET" Reboot your PS3 and the 3k3y should now be updated to the latest firmware.

5. That's it! Continue to enjoy using 3k3y with the new features!

NOTE! If you use the same drive as you store content on to do the update with, then its recommended (not needed) to remove the "rootfs", "uImage" & "3key.cfg" from the root of your drive after a firmware update. Since keeping them there will cause the 3k3y to check the files if they are a newer firmware version then stored on your 3k3y micro SD card, and because of that take longer time for your HDD to be recognized.

[20/02/13] v01.02 Added support for BLD/BLF ISO files
[03/03/13] v01.03B2 Fix for older PS3s
[04/03/13] v01.04 Enhanced stealth
[14/03/13] v01.05 XML root node fix
[04/05/13] v01.07 3KS support


  • Fix for error 8001050F
  • Add Web Interface
  • Add eject physical disk when emulation is idle
  • Add diags via on board LED (1-Passthru, 2-Emu, 3-Bad FPGA, 4-Bad BD)
  • Add Alt D1 to 3k3y.cfg / About Info
  • Add option to use PC generated ISO MENU in 3k3y.cfg (experimental)
  • Add option to boot decrypted ISOs
  • Support for Super Slim
  • Add Advanced LED diagnostics
  • Fix remote with bad FPGA version

3k3y-S 4k Install Guide PDF is also attached below: 3k3y-S for PS3 Super Slim (CECH-4xxx aka 4k). Note: This installation requires soldering.

Remember this for-profit commercial product is being peddled by PS3 scene profiteer Gary Wayne Bowser (aka GaryOPA) who is also behind the True Blue DRM-infected dongles with financial backer Max Louarn (convicted Phone Card scammer) and manufactured by Xecuter con-artist extraordinaire Paul Owen who also illegally manufactured PS2 mod-chip circumvention devices under the NeoTechnology brand name.

#84 - PS3 News - 75w ago
PS3 News's Avatar
No Keys Firmware as Public Beta is Released for 3K3y ODE Phat Models today, with details below from PS3 scene profiteer Gary Wayne Bowser (aka GaryOPA):

It been a long time coming, but finally the Phat model of the 3k3y ODE can now support usage on any PS3 OFW firmware, without downgrading first to CFW v3.55, as there is now no need (with this 'public beta' firmware released) to extract your unique Blu-Ray drive key out of your PS3 console.

Of course this means some changes in the operation of the 3k3y, you will now need an original game disc in your tray, and there is currently some more steps in decrypting your game disc and rebuilding it with your IRD_FIles, but the 3k3y coder says they are working on removing some steps and making it easier for you and this just an 'public beta' to prove you no longer need any 'keys' to be extracted from your PS3, making it of course much more useful as it can now be installed on any OFW firmware, next step is to see this get released for the 3k3y Slim ODE and for their SuperSlim adapter to be released.

Below are additional details from TheArtificer (via k3yforums.com/viewtopic.php?f=29&t=11595) on 3K3y Fat 'No Keys' Public Beta, as follows:

DO NOT use this on XK3y, 3K3y-S Slim or anything else.

This update requires that you have an original game disk and that you have a matching IRD file for that game disk. You can make one yourself with the 3K3y Ripper HW or download one from here: 3k3y.com/ird_files/

The Goodies:


  • Firmware update (01.99B4), apply as usual
  • FPGA update (01.06), apply as usual


  • Ripper 1.22, install this on your PC

You may also be interested in the 3K3y Ripper Manual: xkeydownloads.com/ps3firmware/3K3y%20Ripper%20User%20Manual%20V2.1.pdf

Preparing Your ISOs

For this release it is necessary to re-encrypt your game ISOs using the IRD file of your original game disk.

1) Obtain an IRD file for your game disk
2) Enable the custom D1 option in the Ripper (menu Tools|Options)
3) Decrypt your ISO
4) Re-encrypt your decrypted ISO from step 3. When prompted for a D1 select the IRD from step 1.

Keep the decrypted ISOs if you can, the next major update will remove the need for step (3)

When Custom D1 is enabled the Ripper will also allow you to use the original game IRD file during the ISO rebuild process directly. This will make life easier if you are creating a lot of ISOs.

Using 3K3y

There is one main difference when using 3K3y with this FW. When you select a PS3 game ISO you must insert your original game disk. If the disk is already inserted it will be detected, if it is not you will be prompted to insert it. The remote will display a message asking for a PS3 game disk and the blue disk status LED on the PS3 will blink 3 times

A new cfg option has been added, AUTOEJECT=Y/N, setting it to Y will cause the BD drive to eject the game disk after ISO play back has started. Useful since 3K starts in passthru mode if you power on with a disk inserted

From PS3 scene profiteer Paul Owen on his PS3 protection scheme circumvention device:

All current PATA (fat) 3k3ys on the market can be easily updated to this firmware via USB once the device is installed in your system.

Remember to read what TA has written above carefully before asking questions. And... Have fun (while we continue to profit off the PS3 scene).

Not sure if there is a way around it, however you can just leave the disc in there, no need to eject it, you can switch ISOs 100000 times without getting up. You only need to insert the disc after the console is on. The 3k3y will not prompt for the disc after the game is selected if it is already in there.

There is a setting in the config file that will auto EJECT the disc after you go into the game if you want to enable that. The only reason we enabed this feature is that if you leave a disc in there when you turn off your PS3, and turn it back on ti will boot into passthrough mode.

It is up to you if you want to enable the feature or not however.

Finally, from naehrwert and zecoxao respectively:

For those interested (although this has been known for a couple of days now) oh, and good luck getting it to work without the disk hehehehehe

Update: From TheArtificer (via k3yforums.com/viewtopic.php?p=71434#p71434) comes an FCEU NES emulator for PS3, tested and working on 4.46 OFW.

Download: [Register or Login to view links]

1) Download & unzip
2a) 3Dump FW users should encrypt using the Ripper
2b) No Keys FW users should encrypt using the Ripper + IRD for their game disk
3) Enjoy crap games from the last century

3k3y. 3k3y-S Slim install Tutorial. Play Ps3 games from a Hard drive

Superslim daughter board for 3k3y SATA

The 3k3y team have finally released a picture of the SuperSlim Add-On board for their ODE that will be shipping soon, which allows owners of 3k3y ODE to use it on their 4000 series of PS3's console.

s3nint3!As you can notice from the above picture, there will be a total of Eight Quick Solder Points to perform to securely attach the XK2 ODE add-on board to your SuperSlim PS3 motherboard, along with some simple flat ribbon cables running to main 3k3y hardware module.

XK2?! We receive many questions about XK2 after announcing "XK2 support" with the v2.00+ firmwares for Xk3y.

XK2 is a daughter board for 3k3y SATA. Thats right - 3k3y SATA now works with SATA PS3's *including Super Slim* AND Xbox 360!

The functionality is exactly the same as for the standard Xk3y and we will continue manufacturing both as 3k3y SATA + XK2 daughter board will inevitably be more expensive than the standard Xk3y hardware.

From bubba: 3k3y Team is making the video today on SuperSlim with HomeBrew later today.

3k3y: Game & Homebrew Loading on SUPERSLIM!

#83 - PS3 News - 81w ago
PS3 News's Avatar
Below is the PS3 3k3y Ripp3r v1.20 Source and v1.21 for those interested with the changes, as follows:

Note: This requires .NET 4.0. New in this release: Fixes a bug when reading a file across a sector boundary from a Blu-ray disc.

From UglyClicker: Ripp3r version 1.21

A new version of the Ripp3r application 1.21 has arrived. Version 1.21 is a bugfix release, which fixes a bug when reading a file across a sector boundary from a Blu-ray disc.


  • The application used to crash when reading from a disc failed, that's fixed
  • The IrdViewer could be very slow when loading big files. It's still slow, but now it's not freezing the application anymore
  • We removed all obfuscation and packers from the releases, and the sources are attached!

Update: From modrobert: I just got info from a trusted source close to Team 3k3y that drive key extraction is now supported on all PS3 models, including Super Slim (CECH-40xx).

This has now been officially confirmed, though I incorrectly assumed the drive key can be extracted on all models, apparently there is no need for key extraction to solve this problem. Firmware updates for both PATA and SATA versions of 3k3y with support for all PS3 models will be released soon.

3k3y now working with ALL MODELS, INCLUDING SUPERSLIM! (via facebook.com/x360key/posts/599941876705028)

The long wait is over - there is now no need for CFW for key extraction. We will release firmware updates for both PATA and SATA versions in the coming week.

3K3y update:

  • Super Slim adapters are now being manufactured, ETA 2 weeks
  • Homebrew loading now working
  • Feature added: Region lock removal
  • A new 3K3y FAT update is now in beta testing. With this firmware there is no longer any need for CFW to dump the drive key.

From bubba: We now have games booting on all PS3s, that includes 30xx and 40xx (Superslims). More news soon.

I tested the new firmware!!! Yes NO More Drive Key Woot.. I took a Ps3 yesterday on OFW 4.46 put the 3K3y in it my sons PS3 (He was mad) bc he didn't want to get banned! but guess what, it worked and my son is still online playing... and its a backup game.

  • 3KF works without keys. Superslim in < 2 weeks, 200x etc etc soon after.
  • XK2, 3KS and UK3Y will likely all be the same main PCB.
  • Just add adapter.
  • 250x, 300x & superslim all need soldering
  • 8 signal points on QSB
  • Plus GND, 5V
  • Plus 1 wire for superslim

Video is Coming Soon.

Note: This is how Cobra ODE is doing theirs (same hack) when they said they have it hack on 3xxx, 4xxx also.. but we are faster on the gun

You will need a disc in the drive for this new hack to work..!!! That goes for Cobra ODE also!!! 3K3y team is trying to work it out right now... with no disc in the drive.

From zecoxao: I take few people gave a real hard look at naehrwert's meme pic? that's how the thing works. auth_drive_user is probably a function to authenticate the bdrive. since he said it doesn't use eid4, you can assume two things:

1- it doesn't use perconsole keys and derivatives
2- it probably uses keys associated with the bddrive modules (sv_iso_spu_module keys, not perconsole)

You tell this to any other people who understand how to make an ODE and you got loads of ODEs appearing (the clones). you also have a nice clean patch by Sony and it's game over for the odes on unhackables, at least until the most current version.

3k3y-S Install Guide

Download: [Register or Login to view links]

3k3y (SATA) install guide for PS3 CECH20xx and CECH21xx.

3k3y Ripp3r Guide v2.1

Download: [Register or Login to view links]

3k3y Ripper User Manual for slim and fat PS3 consoles. Note: Please make sure you the correct cable for slim consoles.

#82 - PS3 News - 90w ago
PS3 News's Avatar
Below are details on the 3K3y SATA Motherboard And 20XX Daughterboards from bubba, as follows:

We have just assembled the first 'production status' 3k3y SATA motherboards and 20xx daughter boards.

The 3k3y SATA motherboard is compatible with all PS3 models with a SATA interface for the BDROM through a series of different daughterboards. The first board to be released is the 20xx series board.

We hope the hardware can be sent out to testers in the beginning of next week, and we do not anticipate any issues.

Also from bubba come some 3KS Slim Ver (3k3y) Pics below, who states the following: My good friend's at 3K3Y AND XKEY Sent me a Testing Unit.. Here is the Pics.. I just Install it on A Slim model.. Everything is Working HAS it should be.. I am Online Woot..

You will still to have your drive key... I am on 20/21xx Model. This 3kS 3K3Y is Not Out Yet... Im just testing it for them.. Past Week. If i get time i will show a video how to install it and get the drive key and run games.. or maybe my good friend brakk3n will do a Better one.

3KS & XK are now running on the same main PCB. Just add the correct adapter. More to come.. I got bigger news coming soon.

3k3y microSD image v1.01 (via k3yforums.com/viewtopic.php?p=65764#p65764)

Download: 3k3y101FW.rar‎ / FPGA.rar

This is a recovery factory image (firmware v1.01) by Team xKey for the 3k3y (PATA) microSD card to be used if the original card is corrupt (or if formatted by mistake). Use USB Image Tool to write the image in Windows (in Linux, use 'dd'). NOTE: If you want to upgrade 3k3y use USB stick or hard drive, don't copy stuff directly to the microSD card. WARNING: This firmware version contains bugs which makes 3k3y crash some of the old fat PS3 models, so only use this to restore microSD card, then update to latest version.

Update: 3k3y SATA is now ready! After months of testing 3k3y SATA is now in production. All SATA models can be supported by various daughter boards. At this time the first daughterboard supports the following models: (via facebook.com/x360key/posts/579022432130306)

  • Fat PS3s, CECHL onwards
  • 20xx/21xx Slims

3.55 is still required for key extraction but we have made some interesting finds which may eventually lead to key extraction directly from the drive.

#81 - PS3 News - 96w ago
PS3 News's Avatar
Below is a 3K3y PS3Dec (alternative encryptor/decryptor) from bubba (aka red_meryl) who states the following:

Download: [Register or Login to view links] (72.32 KB) / [Register or Login to view links] (76.10 KB)

Here's an alternative encryptor / decryptor (can be used in place of 3k3y ripper's ISO Crypto function). Features:

  • Commandline
  • Multi-threaded decryption/encryption
  • Compiles on linux and windows (should compile on anything with openmp and polarssl)
  • No dependency on .NET

Source, windows 32 bit and linux 64 bit binaries are included. Can whoever's interested please compile it for other environments (mac, linux 32 bit, others), and put a link to the binary in this thread? Also no plans for a gui, but a simple one shouldn't be hard to make if anyone's interested in doing so.


[Register or Login to view code]


[Register or Login to view code]


The multi-threading is not optimal (the encryption/decryption is multi-threaded, but not the io), but for an initial release it's fine. Not heavily tested. Please compare output to 3k3y ripper, and check that a decrypt-encrypt cycle produces the same iso you started with.

Increasing efficiency and adding features are planned later. The next version will at least have optional sha-1 hashing of input and output. Any feedback, bugs and feature requests please mention them in this thread.

Update: New version (r4), speed improvements (on relatively new hardware with HDDs this is io bound, and about as quick as it's going to get).

New features:

  • Fully multi-threaded (io happens simultaneously to processing)
  • Read from stdin and write to stdout (write '-' in place of a path)

Haven't implemented sha1-1 hashing as it complicates the multi-threading. As a compromise, you can pipe to stdout to do any post-processing you want. As a bonus, if someone makes a (piped) commandline ripper decrypted isos can be created directly.

Below are some 3K3y videos as follows for those interested and an official 3K3y Firmware v1.04 revision:

3K3y Firmware v1.04

Download: 3K3y Firmware v1.04

This firmware update fixes freezing issues on certain older PS3s, adds support for BLD/BLF ISO files, and offers enhanced stealth features.

2013-03-05: 3k3y Firmware v1.04 released!

This firmware update fixes freezing issues on certain older PS3s, adds support for BLD/BLF ISO files, and offers enhanced stealth features. Get it now!

2013-03-14: Ripper App now rebuilds 'jailbreak rips'!

The Ripper app can now rebuild a complete ISO from so-called 'scene' or 'jailbreak' rips (decrypted game data without ISO header and other metadata). We are now very proud to announce that you can recreate the ISO file using our Ripper app. To do so you need to download the corresponding Iso Rebuild Data, or IRD, file. These files can be downloaded and redistributed freely as they only contain metadata an other non-copyrighted data.

Finally, from bubba: 3K3y Public beta Ripp3r 1.18

Download: 3K3y Public beta Ripp3r 1.18 Setup.rar‎

We're proud to announce the public beta of the Ripp3r application 1.18. We ask you all to test this application for every possible aspect. Also test the IRD site: 3k3y.com/ird_files. Features of the new Ripp3r application include:

  • Rip PS3 game to ISO
  • Encrypt/decrypt ISO (decrypted ISO's can be zipped, but are NOT playable)
  • Decrypt ISO directly to zip or multipart zip (define size in the settings (Tools->Settings))
  • Encrypt ISO directly from zip
  • Create IRD (ISO Rebuild Data) file from ISO (this requires an 3k3y ISO)
  • Anonymizes specific information in the IRD (like the D2)
  • Completely anonymous upload of IRD files. Uploading uses a public/private key pair, which encrypts the payload before sending it to the server. We NEVER save who (not even IP) submitted which IRD file.
  • Identify JB Rip: gives you information about the JB rip, and tries to find the correct IRD file
  • Create ISO from JB rip: rebuilds an exact copy of the original ISO. This requires that a correct IRD file has been submitted to the database
  • Submit IRD file to the database: after you've ripped a game to your computer, also create an IRD file for it and upload it to the database. This will help us with more content, and helps others to rebuild the ISO
  • Automatic determines the correct version of PS3UPDAT.PUP file for the JB rip and downloads it
  • Automatic joins splitted JB rip files
  • Both GUI and (limited) console version available

Things that are NOT in this version:

  • Mono compatibility, due to the compression and packing algoritm we use, this software does not work under Mono (yet). We may look into this.
  • Automatic IRD download
  • Rebuild PsArc

Of course, you can assume that I've forgotten a few things. You can find those things out yourself. As always, post your findings here. Both good and bad. If you find issues, post them here. If you see weird Chinese characters, definitely copy them as text and post them here, or as a pastie. If you need a logfile, the last 5 sessions are saved to a logfile in your temp directory (type %TEMP% in the addressbar in Explorer).

Have fun, and please, please, upload those IRD files. We need a lot! Get the goodies here, and have fun!

Public beta Ripp3r 1.19 / 3k3y Ripper App v1.19 by r-win

Download: ripp3r_v1_19_beta.zip‎ / ripp3r_v1_19.zip‎

New and fixed in this release:

  • Cancel while ripping fixed
  • Windows XP support (yes, for real, .NET 4.5 has been dropped, now .NET 4.0 is required)
  • Save the last choosen paths on all dialogs
  • Ird creation from disc
  • Ird creation while ripping

We're proud to announce the public beta of the Ripp3r application 1.19. We ask you all to test this application for every possible aspect. Also test the IRD site (above) This version has some new features, which include:

  • Ird creation from disc
  • When ripping an iso, the IRD will automatically be created (enable/disable in settings)
  • Windows XP support (.NET 4.0 required)
  • Save last used paths in all dialogs

Also, a few bugs are fixed, including:

  • Fixed bug when pressing cancel while ripping
  • Prevents crash on Windows XP

Of course, you can assume that I've forgotten a few things. You can find those things out yourself. As always, post your findings here. Both good and bad. If you find issues, post them here. If you see weird Chinese characters, definitely copy them as text and post them here, or as a pastie.

If you need a logfile, the last 5 sessions are saved to a logfile in your temp directory (type %TEMP% in the addressbar in Explorer). This application REQUIRES the .NET 4.0 runtime.


Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links

Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News