86w ago - This weekend the ProgSkeet Team has made available a video demonstrating the ProgSkeet PS3 Solderless and Dual NAND Kit Tools alongside details below.
To quote: We are happy to introduce you the SOLDERLESS KITS for our ProgSkeet device!
The main word is "BE FLEXIBLE" as ProgSkeet project will be the BEST TOOLKIT for the NAND and NOR flashing!!! We present today the NAND TOOL KITS, in few days we will be ready also with NOR TOOL KITS!!! Stay Tuned
1 - PROGSKEET is 100% PIN to PIN compatible with the SOCKET tool sold from this site http://www.360-clip.com
Just connect the ProgSkeet 32 pin special flat cable. (please note that this version don't support programming or reading with out the device is powered on. A new version will be released with the VCC pad to manage NANDS with a self power provided from PROGSKEET) 360-clip.com and also us we will offer this socket in a package together with the 20 cm 32 PIN flat cable.
2 - ADAPTOR PCB: This pcb is an adaptor from 50PIN ZIF PROGSKEET CONNECTOR (necessary for the coming "NOR SOCKET" solderless tools) to 2 x 32 PIN ZIF connector. With this adaptor progskeet is able to manage 2 NANDS on the DEVICE and also extra 2x SECONDARY NANDS (for dual nand feature). The kit include the 50 pin flat cable from PROGSKEET to ADAPTOR PCB.
3 - NAND PCB: This "optional" pcb has a 1Gbit NAND flash on board. Progkseet is able to use it like a backup nand or switch this nand and use it instead the NAND on the board of the device. The feature called "DUAL NAND" allow to support different NANDs ONLINE and test firmwares in a easy fast way. The software will be ready soon to support this feature, user can also attach a switch to progskeet to allow a fast selection of the NANDs without using the PC tool.
Progskeet support max 2 x NAND PCB on each ADAPTOR PCB, the kit include a 32 PIN 3CM flat cable (from NAND PCB to NAND SOCKET)
You can see a FULL PROGSKEET KIT SAMPLE where is clear how is the complete kit with 2x NANDS PCB and 2x NANDS SOCKETS (on the picture miss one socket sorry J ) but I think the concept is clear.
The big advantage of PROGSKEET is that can work on ANY CONSOLE / DEVICE, is study to be MODULAR and so is MUCH CHEAPER then any other solution that is specific addressed to a device.
The nice special FLAT CABLES are also easy to be fitted inside the device without bit problems, and also the KIT is removable in few minutes and is not PERMANENT.
We remember that PROGSKEET is an OPEN PROJECT study to be used in many kind of devices CONSOLES, SATELLITE, IPHONES, PENDRIVERS etc etc. "PROGSKEET NOTHING MORE THAN A GOOD NAND / NOR PROGRAMMER".
We will send tomorrow more infos and pictures regarding PROGSKEET V1.1 "CRYSTAL BLUE LIMITED EDITION" in production in these days and available in the market soon!
Nice news also about the PROGSKEET software, that now support new nice features.
BYE FOR NOW
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!
i just have a few question i have searching a lot and i want to downgrade my ps3 fat i'm planning to get a progskeet but i found about the nand clip but i haven't found someone who uses with progskeet with nand clips. can i downgrade my ps3? and can i do to a nor ps3 if i get the nor clips?
Many thanks for your reply, I did what you said and I was finally able to install the driver, but when I tested for shorts it said there were shorts found. I have attached a screenshot to let you see what it said.
I would really appreciate it if you could talk me through this as I don't want to do anything wrong. I was wondering what the next step would be now?
Ok it is easy to say that the one that you have has had some problems with writing to chips both nor and nand chips. I have two of them and have never gotten them to work when it comes to writing to the chips, it does read both but not write. I have tried both nor and nand chips and cant get it to write.
Ok so now remember this that if you try it and it doesn't work you will have a ps3 that will not work (brick) the reason for this is that it doesn't write the files that is needed. You will have to flash the newest bitstream to the progskeet. Thanks and if you need help let me know. Like i said i have two 1.2s and still use my two 1.1s. thanks