119w ago - Following up on the initial news, today the E3 Team have made available a video of their E3 Flasher downgrading a PS3 Slim 3.70 Firmware console to version 3.55 without any soldering required.
To quote: E3DIY team announces a successful Slim Downgrade v3.70 to v3.55 with our new E3 FLASHER!
In only FIVE minutes, the whole downgrade progress was completed!
Time is short and operation is very easy, this is because of our exclusive special E3 FLASHER design:
ONE-Button Operation and NOR Flash onboard!
E3 FLASHER compatible all NAND FLASH and NOR FLASH consoles
With SLIM Consoles, no need for any soldering!
But with PHAT Consoles, some soldering will be needed!
In this video there no images of the E3 FLASHER as we need to keep our design under wraps until it is ready for release, I hope everyone understands.
The official version should be released next week, at that time there will be more videos and pictures and everything will be available to the public.
Also below is an E3 Flasher PS3 Dual Boot 3.70 to 3.55 Firmware video and details via e-mail:
E3 FLASHER - Dual Boot (3.70 to 3.55)
E3DIY team success dual boot with E3 FLASHER, you can switch 3.7 and 3.55 in few only a few seconds!
Easy with 1 key operation.
E3 company will release all details like picture, installation, operation and price next week.
Team E3DIY get another great progress for PS3 with E3 FLASHER, it will release at the same time next week.
PS: 4times switch showes same MAC address, to prove it is the same console.
This post will look at the different DATE-CODES that are present on the casing of a PS3 and if that DATE-CODE relates to a console version that can currently be downgraded from 3.70 to 3.55 using dospiedra’s V2 downgrade or a FAT console alternative.
The principle behind DATE-CODES is simple: the first character represent the YEAR, and the second character represents the QUARTER of that year it that console was manufactured.
DATE-CODE of “XY” would mean the console was manufactured in the “Y” QUARTER of YEAR “X”. Simple right?
The Date code can be found in the following locations (depending on your console type):
PS3 FAT: Sticker on the back.
PS3 Slim (CECH2 Series): Sticker on the bottom.
PS3 Slim (CECH3 Series): Sticker on the back.
UPDATE 1: I have been told that only consoles that come with firmware 3.55 and lower from factory are the only consoles that the downgrade should be attempted with.
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!
the e3 doesn't have to be "married" as long as u have the right update. pm ill send u a link. oh and you can leave the clip in if you want (i don't know why you would leave it except for dual boot) just put masking tape around the connecter that goes to the e3 card and use strong alcohol to get the glue off if u need to use it again.
my opinion is that Nor Inspector 0.01 is the best i have hacked many ps3 and it has not been wrong 1nce. now i'm saying its never been wrong 4 me but u may get different results. no one one this site or myself are responsible if you mess your own stuff up. but the best advice anyone could give is be patient take your time and triple check everything.
Good Friend I have a ps3 slim cech 2001a placing it in service mode and found out the format thinking that went so far as service and console video turns on but does not give it 30 seconds and I have not backed off the nor.
my question is will that e3 welding I can take a backup of the nor and to revive or need a valid nor when the console was fine and if not I have that method would you recommend?
First thing is make sure your ps3 is a nor. And if it is get the e3. The clip can be a pain in the butt to get set on there right. And yes it can be removed. But once You use the e3 with that ps3 it will be married to that and cant be used to dual boot another ps3. Thanks.
I'm planning on downgrading my ps3 and know that I can get it to 3.50. My only question is, after I do everything with E3 does it have to stay in my console or can I just disconnect the clip from it reinstall my hard drive?