Sponsored Links

Sponsored Links

Video: E3 Flasher PS3 Slim 3.70 Downgrade to 3.55 Firmware


Sponsored Links
160w ago - Following up on the initial news, today the E3 Team have made available a video of their E3 Flasher downgrading a PS3 Slim 3.70 Firmware console to version 3.55 without any soldering required.

To quote: E3DIY team announces a successful Slim Downgrade v3.70 to v3.55 with our new E3 FLASHER!

In only FIVE minutes, the whole downgrade progress was completed!

Time is short and operation is very easy, this is because of our exclusive special E3 FLASHER design:

  • ONE-Button Operation and NOR Flash onboard!
  • E3 FLASHER compatible all NAND FLASH and NOR FLASH consoles
  • With SLIM Consoles, no need for any soldering!
  • But with PHAT Consoles, some soldering will be needed!

In this video there no images of the E3 FLASHER as we need to keep our design under wraps until it is ready for release, I hope everyone understands.

The official version should be released next week, at that time there will be more videos and pictures and everything will be available to the public.





Also below is an E3 Flasher PS3 Dual Boot 3.70 to 3.55 Firmware video and details via e-mail:

E3 FLASHER - Dual Boot (3.70 to 3.55)

  • E3DIY team success dual boot with E3 FLASHER, you can switch 3.7 and 3.55 in few only a few seconds!
  • Easy with 1 key operation.
  • E3 company will release all details like picture, installation, operation and price next week.
  • Team E3DIY get another great progress for PS3 with E3 FLASHER, it will release at the same time next week.

PS: 4times switch showes same MAC address, to prove it is the same console.





Finally, from [Register or Login to view links], to quote on PS3 3.70 to 3.55 Firmware downgrading via Dospiedra's downgrade v2 patches:

This post will look at the different DATE-CODES that are present on the casing of a PS3 and if that DATE-CODE relates to a console version that can currently be downgraded from 3.70 to 3.55 using dospiedra’s V2 downgrade or a FAT console alternative.

DATE-CODES

The principle behind DATE-CODES is simple: the first character represent the YEAR, and the second character represents the QUARTER of that year it that console was manufactured.

DATE-CODE of “XY” would mean the console was manufactured in the “Y” QUARTER of YEAR “X”. Simple right?

6A - Downgradable (Never Produced?)
6B - Downgradable (Never Produced?)
6C - Downgradable (Never Produced?)
6D - Downgradable
7A - Downgradable
7B - Downgradable
7C - Downgradable
7D - Downgradable
8A - Downgradable
8B - Downgradable
8C - Downgradable
8D - Downgradable
9A - Downgradable
9B - Downgradable
9C - Downgradable (Slim Introduction?)
9D - Downgradable
0A - Downgradable
0B - Downgradable
0C - Downgradable
0D - Downgradable
1A - Downgradable (Factory Firmware 3.55 and lower only!)
1B - NOT Downgradable
1C - NOT Downgradable (Not out yet?)
1D - NOT Downgradable (Not out yet?)

The Date code can be found in the following locations (depending on your console type):

PS3 FAT: Sticker on the back.
PS3 Slim (CECH2 Series): Sticker on the bottom.
PS3 Slim (CECH3 Series): Sticker on the back.

UPDATE 1: I have been told that only consoles that come with firmware 3.55 and lower from factory are the only consoles that the downgrade should be attempted with.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 699 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

AKmania's Avatar
#684 - AKmania - 24w ago
Is there any one know how to installed e3 ode without using the dongle?

Because the dongle is too easy too damage.

buckchow's Avatar
#683 - buckchow - 28w ago
Well, out of the four PSP FW versions I tried already, the only one that wouldn't even start PS3Jig and just gave me a black screen instead was 6.20. All of the others started the program normally.

After my last post, I was able to briefly test both the fat PSP running PSPJig and the E3 card reader on another PS3 that boots normally. The E3 turned blue and successfully put the console into factory mode. After trying two different USB drives, I was able to get the system back out of factory mode.

When I ran PSPJig to put the PS3 into factory mode again, the challenge-response sequence appeared on the PSP screen, but the PS3 wouldn't go back into factory mode even after several attempts. I didn't get a chance to try the E3 again yet, I assumed it would work.

Back on the PS3 with the five double-beeps, I tried the E3 card reader again and it still didn't work. I also put in the USB drive with the "get out of factory mode" program that worked in the normal system in case the broken one was already in factory mode from the previous owner, but the drive never powered up before the beeping began so it made no difference.

Scouring around every forum post I can find, there are quite a few other people who have run into the same problem over the years, but there hasn't ever been an explanation and the only suggested solution is flashing. Hopefully someone has unraveled this mystery by now though and they'll wander into this thread.

k9inpoop's Avatar
#682 - k9inpoop - 28w ago
i think that you might have to get different versions of FW for the psp i know it was a FW that only a PHAT psp was able to go safely and you might have to try a different version of the downgrade files or was it the Lv2diag.self file... (i forgot it was one of those i couldn't get working with ps3jig) for a while and then after i tried everything the last one i tried worked (i even tried it on a 1.0 Phat downgraded psp lol)

k9inpoop

buckchow's Avatar
#681 - buckchow - 28w ago
Thanks, I tried that but still can't get any activity from PS3Jig after the USB driver started message. At least the PSP never bricked with me bouncing around between 5.00, 5.50, 6.20, and 6.60, but the PS3 is still sad and dead.

k9inpoop's Avatar
#680 - k9inpoop - 28w ago
(i think) it was 5.00 m33 and it took me awhile to find that firmware online still but be careful because i read that it might mess up your psp but i had no problem with it at all and the tut for the jig app is this right here: [Register or Login to view links]

k9inpoop

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News