Sponsored Links

Sponsored Links

Some PlayStation 3 Service Mode Details!


Sponsored Links
309w ago - Over the months there has been a lot of inaccurate information circulating in regards to how exactly the PlayStation 3's Service Mode works, and as promised in our previous Dev updates here are some of the facts to help separate the rumors and speculation.

It is a fairly simple process as follows.. For starters, the PS3 is powered off, and a special USB dongle, known as the Jig, is connected. The PS3 is then turned on, and then off, once it has detected the Jig.

After this occurs, the PS3 is then turned back on, into "Service" Mode. From here, the PS3 is re-flashed using a Firmware Update on a USB stick, specifically designed to only install from the Service Mode. Once the PS3 is re-flashed with the software, it is then used in conjunction with a PC running customized software, specifically the DEX.exe and CEX.exe's.

There are a multitude of special PS3 firmwares, basically three major ones. The first is a Core System, followed by the Service System, then finishing it off with the Final Software.. usually Retail.

From the CEX/DEX PC side software, just about anything can be done: Copying, transfer and resigning of box-specific items like PSN games, user profiles, etc.

Furthermore, the systems can be re-flashed to any software version as well. The system's keys can also be "rearranged", such as the marrying of the PS3's BD-ROM Drive (or controller) with the mainboard. Needless to say, this can do a lot more than a simple "Recovery Menu", as it can change firmware and more.

Over the last few months we have also compared the flash dumps (pictured below) done by our very own courier of a PS3 in Service Mode with a Retail (and a Debug) and found that the systems are primarily alike, however the Bootloader 1 of the Service Mode PS3 differs than that of the other systems. Work is still being done by the resident PS3 Devs in trying to pinpoint exactly why this is the case.

Finally, we have a correction to make to our previous PS3 Dev update as follows: it should read that the older PS3 consoles utilized dual (2x128MB) 48-pin chips totaling 256MB versus 512MB. To make it a bit more confusing, most PS3's actually use two 1 Gigabit flashes (for a total of 2 Gigabits), however, in actuality its only 256 (2x128) Mega Bytes. These things tend to get lost in translation from Italian to English at times! To add onto that, the new PS3's use a 128 Mega Bit flash, for a total dump of 16 Mega Bytes!

We would have corrected this on the same day, but by the time it was discovered the post was linked throughout the Internet with only a few users even noticing the typo.. so we opted to mention the correction in our next update instead of leaving users with a dead link- our apologies!

One last tidbit of news - Even on a Debug PS3 console, that can downgrade from any Firmware back to 1.00 via the System Software, it can't via swapping flashes.

Our first thought went to EFUSES, however, on a closer examination this may not be the case as we are currently in the process of examining the PS3's power supply to trace out where the power for the efuse blowing "mechanism" may reside- stay tuned!



Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 32 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

christopher212's Avatar
#27 - christopher212 - 306w ago
My PS3 is in service mode but I'm confused how do I get it out, can i just install any firmware update and would that get it out?

idone's Avatar
#26 - idone - 308w ago
thanks CJ!

this was exactly the information i was seeking. The clarification is much appreciated.


peace
idone

CJPC's Avatar
#25 - CJPC - 308w ago
Quote Originally Posted by idone View Post
So basically what you are saying is that the 1.00 pup to downgrade differs from the original 1.00 debugging station upgrade???

And that all that needs to be done is to run it from software update in the xmb with no need to format the hdd or any other step in the process?

Also what pup versions, (special or otherwise) can be used to downgrade?? And if known what is the size difference between a downgrader pup and the original update.pup of the same version???


Basically Yes, it does differ, and its that simple, done right in the XMB without a need to do any other steps.

All new releases (after 2.00) can downgrade back to themselves from something higher, and the lower FW's were replaced by a special downgrade one!

idone's Avatar
#24 - idone - 308w ago
Quote Originally Posted by flurix View Post
As far as downgrading a TEST, it's just a special PUP that you run like a normal upgrade PUP, but it downgrades.

So basically what you are saying is that the 1.00 pup to downgrade differs from the original 1.00 debugging station upgrade???

And that all that needs to be done is to run it from software update in the xmb with no need to format the hdd or any other step in the process?

Also what pup versions, (special or otherwise) can be used to downgrade?? And if known what is the size difference between a downgrader pup and the original update.pup of the same version???

tks


idone

tworok's Avatar
#23 - tworok - 308w ago
the more dev threads i read, the more impressed i get with sony's security on the PS3 and with the descoveries of the DEV team of this forum.

awesome work guys, keep us posted!

cheers

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News