Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when the exploit works.
On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr). On Windows, WinAVR should do the trick.
Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run
For the Teensy boards, you probably have to use the Teensy Loader software.
To use this exploit:
• Hard power cycle your PS3 (using the switch in back, or unplug it)
• Plug the dongle into your PS3.
• Press the PS3 power button, followed quickly by the eject button.
After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means the exploit worked! You can see the new "Install Package Files" menu option in the game menu.
A programmed dongle won't enumerate properly on a PC, so don't worry about that.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!
ugh...that means the LEDs are on two different ports (PD3->green and PB2->red). I dont know enough about the programming to change the leds.h to that... guess you have ask someone else if you want working leds. sorry
ok, after some try and error i managed to find out that you used a hex compiled for teensy 1.0@8MHz,so i compiled a 1.1-hex for you.. leds probably won't work when they didnt work with the original hex though.
your board probably uses other pins for the LEDs than the teensy1.0 uses.
B1oH4z, sorry boring you again, i promise when you come to Portugal i offer you a lot of beer and a room of girls hehe
Can you help me with this question please ? I have one board, like teensy, who have two leds, one green and one red, but i have the proper hex to them but the hex dont come with red and green red working and no 1.1 psgroove.
The board is teensy 1.0, can you help me ? I will attach the hex of the board that is actually working on my ps3.