Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when the exploit works.
On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr). On Windows, WinAVR should do the trick.
Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run
For the Teensy boards, you probably have to use the Teensy Loader software.
To use this exploit:
• Hard power cycle your PS3 (using the switch in back, or unplug it)
• Plug the dongle into your PS3.
• Press the PS3 power button, followed quickly by the eject button.
After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means the exploit worked! You can see the new "Install Package Files" menu option in the game menu.
A programmed dongle won't enumerate properly on a PC, so don't worry about that.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!
Maybe you know this but I thought I would mention it anyway just in case, (It's just the way you described above as this is how it works normally)
When you start backup manager and select a game (BMv1) it will restart and go back to the main screen but if you go to the game disk this should now display the game you selected in BM, just launch the game and it should run (however it doesn't for me)
Well everything working i can make backups but when i try to play one it's crashing and starting from main screen and i have to again start backup manager no matter which game i'm trying , any ideas what could be wrong.
I have a problem with backup manager, when I try to run a backed up game (using BF BadCompany 2) it either crashes on the PS3 background (as it fades away) Race Driver Grid say's Error reading disk, I have also tried to install to internal and external hardrives).
PS3 60GB Launch Model
PSGrooPIC 1.0 (Added 10K resistor to pin one to pull up MCLR)
PSGrooPIC 1.3 20Mhz RB1(LED) - Tried NonBTL with Willem, Jailbreak worked but had the problems as stated above,
I then flashed it with the Bootloader and updated via PC with PSGrooPIC 1.3 20Mhz RB1(LED) BootLoader Ver
Dongle worked but once again same problems with the games as above! I got both manager and rdx_manager but still the same problem.
However I have had the following working:-
SNES9X - working
FTP Server - working, connected ok to PC
Awsome file manager - working
Tried PS3 USB Custom Firmware Loader v0.3 but I just get the black screen
I just hope someone can help me out with this as i'm pulling my hair out!