Sponsored Links

Sponsored Links

PS3 NOR and NAND Auto Patcher v0.04 By Rogero is Released


Sponsored Links
86w ago - Following up on his PS3 NOR Dump Auto-Patcher v0.01, today PlayStation 3 developer Rogero has released PS3 NOR and NAND Auto Patcher v0.04 with the changes outlined below.

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links] (Mirror #2) / [Register or Login to view links] (Mirror #3)

To quote: PS3 Nor and Nand Auto Patcher v0.04

ChangeLog:

Initial release v0.01

  • Compatible with both E3 and ProgSkeet Nor dumps.
  • Checking your PS3 Nor Dump if it is Byte-Reversed or No.
  • Applying the correct downgrade patches depending on the Dump type detected.
  • Eliminating the need to byte-swap the dump in order to apply the patches.
  • Making the patching easier rather then using several programs to do it.

v0.04 Update

  • Added new Rogero CFW4.40 v1.02 patches.
  • Works for any PS3 model with downgradable metldr revision (not metldr2) including PS3 with Minver 3.56
  • No more FSM is needed for downgrading.
  • Added detection of non-downgradable "metldr" revisions.
  • Added support for Interleaved NAND Dumps (now will patch both Nor and Nand dumps)

How to use:

  • Dump your Flash many times and verify it well before proceeding.
  • Drag and Drop any Nor or Interleaved NAND Dump onto the executable,
  • It will detect the dump type and patch it accordingly with CFW4.40 patches.
  • Flash the patched image back into the PS3 Nor/Nands.
  • Restart the PS3.

If the PS3 was already on OFW4.40 then it must start normally and you can Install Rogero CFW4.40 v1.02 from XMB -> Settings -> System Update.

If the PS3 was on OFW < 4.40 then you will see the "Connect a PS3 controller" screen, and you can continue by installing Rogero CFW4.40 v1.02 simply by following the screen instructions.

Warning: This program does not check for the dump validity, you must provide a good dump previously checked and verified.

It will patch the dump image even if it's not a 100% valid dump, the program only does some minimal checks before patching assuming that the user have provided a valid dump.








Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 23 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

imajei's Avatar
#18 - imajei - 61w ago
my ps3 just stays on no hdd activity or usb activity.

here's my dumps:

[Register or Login to view links]

[Register or Login to view links]

metzen's Avatar
#17 - metzen - 61w ago
Can you please verify for us that your power cable connector is properly inserted into the connector. Usually the gold contacts have a hard time making the proper connection. Please let us know if you even get the stanby (red) light.

Thank You

imajei's Avatar
#16 - imajei - 61w ago
Hi, I flashed my ps3 back to original dump but I am getting no signal from hdd or usb what can I do I verified my dumps with ps3 flash tool and bwe nor validator 1.31 all was fine my ps3 model is cechk01.

thanks in advance if you can help.

PS3 News's Avatar
#15 - PS3 News - 83w ago
Following up on the previous updates from BwE, today PlayStation 3 homebrew developer sinsizer has made available PS3 NOR / NAND Statistic Beta for those interested in validating and checking their PS3 NOR / NAND dumps.

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links] / [Register or Login to view links] / [Register or Login to view links] / [Register or Login to view links] by sinsizer / [Register or Login to view links] by Swizzy (Requires [Register or Login to view links]

To quote: Features:

  • NOR/NAND statistics
  • NOR/NAND patching
  • NOR/NAND byte swapping
  • NOR/NAND infos
  • NOR/NAND validation
  • NOR/NAND extraction
  • DATECODE check

This tool works different than other validators. Instead of outputting a full log, it will output an error.log, if validate is checked. But see for yourself.

Always patching 3.55 is recommended to see if the patched statistic is right/green. ckp_management_ID values have to be equel as well as per_console_nonce (should be stated in error.log if not). There is one easy rule! If the error.log contains an entry, your dump is definitly broken!

Ros section is excluded from validation. Why? It's easy to repair, the hole section gets patched anyway and it leads to the rule above.

For NAND all known sections gets checked. But a big part is not or only rarely documented. So the hole part after cvtrm, cell_ext_os_area, OtherOS and unreferenced area at the end won't be checked. It's very important that you have look at the statistics and the “corrupt block count” of flowrebuilder when interleaving.

It's always recommended to check dumps manually with an hexeditor, and using other tools for validation, to be as save as possible! As long as it is not possible to decrypt the full dump, it's impossible to validate it to 100%. Keep in mind this is only beta.

Update: From sinsizer:

  • Added 4.46 patches
  • Some small changes

OFFSET: 0xF00896 --- VALUE: 0x20 --- 0x00 BLANK AREA

sorooshjavadnia's Avatar
#14 - sorooshjavadnia - 86w ago
hi i'm sorry if i'm not good in en lang .., ok every time i try too un ban man console i failed but infact i have a pse fully broken (hardware) and i have the console id and psid. how can i exchange them to ps3 because every time i try for am moment everything is good but as soon as i turn off the system or restart it turn back to default !!!

the original default last time i use the psid patcher wel this can help me pou ro i must use something else

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News