ProgSkeet v1.2 PS3 Pin-outs Arrive for Black Tar and Lite Editions


76w ago - Following up on the initital announcement, today PlayStation 3 developer uf6667 has Tweeted that pin-outs for the ProgSkeet 1.2 style bitstreams (Black Tar Edition and 1.2 Lite Limited White/Crystal Blue Editions) is now available followed by official version 1.21.

Download: ProgSkeet_12_121101_1223.rar / ProgSkeet_10_11_121001_1505.rar / ProgSkeet_10_11_121001_1505.rar (Mirror) / ProgSkeet v1.2 Bitstreams / ProgSkeet v1.2 Bitstreams (Mirror)

To quote: Pinout (Legacy) [121101.1835] {UPDATED 20:19}

Hello, This is the pinout for the 1.2 (Black Tar Edition) bitstreams and "1.2 Lite" (Limited White/Crystal Blue Editions).

ProgSkeet 1.0 / 1.1 -> "1.2 Lite" conversion

Hello, This concerns both 1.0 (Limited White Edition) and 1.1 (Crystal Blue Edition). The USB1T11A (U2) transceiver MUST be removed.

If you are not using dualboot, please put 10kOhm between 3.3V and SWITCH to avoid any problems.

DNU denotes "Do Not Use" There are no benefits besides dualboot so far.

Notes:

For NOR:

  • 10kOhm pullup resistor on P8

For NAND:

  • 10kOhm pullup resistor on P2
  • 10kOhm pullup resistor on P26

Edit: added STP and PDB

ProgSkeet 1.2 Bitstream [121101.1223]

Hello, Update 121101.1223 changelog:

  • there has been a problem with NAND where it would only recognize secondary nand (on both A and B), which has now been fixed
  • switch is now inverted

Shortly following, however, uf6667 Tweeted the following message: "memory issue in latest bitstream, will fix asap"

From ps3tech are some Progskeet 1.2 pinout diagrams HERE who states:

Hi everyone, i managed to sauce up a diagram(s) for both pinouts on the nand/nor. sorry for the sloppy work as i should of done it alot neater for people to read, but it purely to get the people out of the dark.

These are pdf files, with the nand/nor instructions you might have to scroll down the page until you find the pinouts. i hope this helps. Ignore what is on the diagram apart from the solder points meaning data and address points, anything in red please ignore.

Finallt, from Decoy comes the NOR testpoints stating: I used progskeet 1.2 to extract the dump file from my fat cechl PS3 nor, and I had a very good dump, so these are the things that I understood and want to clarify:

  • you don't have to change anything in the switches (R7, R8) (in my case) (soldering)
  • I used 4 gnd points...
  • used the last bitstream
  • and used this diagrams in picture (motherboard ver-001)
  • I didn't use 3.3V to power up progskeet , i used USB..
  • sometimes you have to change the switch on the slave board (turn on/off) to extract a good dump (without green led) but it still gives same result because both CE# secondary and primary are connected to the board.
  • 3.3V can be wp# so I used it as a wp# and connected to P4
  • Use the pinout a provided by uf6667 (above)

From Morto_: Found the right solder diagram for the Progskeet 1.2 on a COK-002 (Boardtraces/Diagram):

From underwurlde comes a ProgSkeet v1.2 Schematic (Reverse Engineered) v1.0 followed by ProgSkeet v1.2 Schematic (Reverse Engineered) v1.1 and ProgSkeet v1.2 Schematic (Reverse Engineered) v1.2 who states the following:

Not sure if this is the place, but here goes. I have attempted to reverse engineer a schematic for the latest ProgSkeet v1.2 & USB Interface boards. Schematic also hopefully shows how to connect to Dual NAND Flash & NOR flash.

Note: Might not be 100% correct, so be warned! If you spot any errors, please let me know. Cheers, Andy.

Below is a Progskeet 1.2 QSB Prototype picture for the upcoming Progskeet Quick Solder Board (QSB) for JSD-001 (NOR layout4 - SUR-001, JTP-001, JSD-001, KTE-001).

He also made ProgSkeet v1.2 work as a v1.1 with a ProgSkeet v1.2 to v1.1 (Daughter Board) and ProgSkeet v1.2 to v1.1 diagram stating the following:

To date the ProgSkeet v1.2 does not work (cannot program NAND or NOR chips - although some success has indeed been reported programming NANDs).

In my quest to get my v1.2 to work I noted that the v1.2 shares much the same hardware as the ProgSkeet v1.1 which DOES work. That is to say the ProgSkeet v1.2 and the ProgSkeet v1.1 shares a common FPGA, the Actel ProASIC 3.

Here I describe how I have turned my ProgSkeet v1.2 into a ProgSkeet v1.1:

Image below shows the ProgSkeet v1.2 board wired up such that it then 'becomes' a ProgSkeet v1.1. Unfortunately there is no getting away from the fact that I've had to add extra hardware in the form of a regulator and more importantly a USB driver chip.

To test my theory, I made a daughter board onto which I've wired my ProgSkeet v1.2:

So the million dollar question: Did it work?? After using my InJeCtuS to program in the v1.1 BitStream (ProgSkeet_Retail_Default111006.dat) and using WinSkeet111205 I attempted to dump and Program the NAND you see soldered to my daughter board. So far, in dumping and programming a NAND chip... YES! Finally my ProgSkeet v1.2 WORKS.

TBD: Testing a NOR chip (thanks Sarah1331 for sending me a NOR chip to test). Hope this is of use to someone. Note: In using my ProgSkeet v1.2 as described above, I did NOT change ANY of the resistors on the board - I used it as supplied (R8, R14 and R16 not fitted).

He also shared a ProgSkeet Phoenix v1.0 Schematic, ProgSkeet Phoenix v1.0 PCB and ProgSkeet Phoenix v1.0 Schematic PDF stating:

Just updated Schematic based on various requests: 50 way ZIF socket now added for completeness and as well as being able to plop a NAND flash directly onto the PCB, one also has the option to plop a NOR flash on it too now.

Apologies for the slight delay in updating all of this - with just two layers to play with and limited space (the smaller the PCB, the cheaper) it proved to be a bit of a head-scratch to route everything. Nice if someone could cast their eyes over this and spot any errors and report back before I order some PCBs (probably in the new year now).

Finally, from M8nTrap comes a Progskeet 1.2 pinout confirmation and DIA001 NOR, as follows:

After installing my progskeet onto a CECHH04 NOR DIA001 with the "NOR pinout" provided into the pdf progskeet 1.2 manual.. it don't work. When I look at this pinout table, I see missing points... from the manual???

DIA001 mainboard pinout: this couple of points are they necessary or not for a dia001?? ."3.3v" ."tristate" ."RESET"

Update: The "tristate" point is obligatory for the progskeet 1.2 onto a motherboard DIA001! point 3.3V (VCC) is not required cuz the power is provided by another point!... who can confirm PLZ! I do a mistake in my PS3 wiki readings, it's the "ground" (VSS) who is provided by another point... sorry! This pinout seems to be correct now!

Pictures are attached below HERE for those interested.

Finally, the official Progskeet version 1.21 alongside NOR QSB is now available with details below, to quote:

Dear Customers, today back in stock new production of PROGSKEET v1.21. The new production introduce a review of the progskeet pcb layout to grant a better and fast production. No new features between v1.21 and v1.20.

Uber creator of PROGSKEET is working now to release a new version of winskeet... more infos soon.








Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 106 Comments - Go to Forum Thread »

Quick Reply Quick Reply

PS3 News's Avatar
#101 - PS3 News - 37w ago
Today Winskeet Bitstream Progskeet 1.2 has been updated by uf6667 (via forum.dayton360mods.com/showthread.php?1004-New-Winskeet-Bitstream-1-2) alongside the release of ProgSKEET Programmer Version 1.0 with details below.

Download: Winskeet40000 & Bitstream Progskeet 1.2

Changelog 130721:

  • NAND works PERFECT now
  • last bitstream before final release
  • progskeet core was rewritten and command set reimplemented in qt (hence the lack of releases in almost a week)
  • versioning added (it will check if you are using the appropriate bitstream, which is located in /bitstream)
  • use of files to load presets (instead of using the box on the first page)... nand is still in the making, so I left the first box as-is for now
  • CFI for NOR works however, presets include most popular NORs but you can also save them (click "Dump CFI" and then "yes" when you are asked to save. put them in /cfi/)
  • handshakes implemented (goodbye timeouts! might, but doesn't have to, make it slower though... on the other hand, this might enable calibration for specific computers/chipsets )
  • usb core had a bug where it would just keep writing to fifo regardless of full or not, but this has been fixed
  • SPI flashing added! (will only be available once I release it for every platform though)





ProgSKEET Programmer Version 1.0 (via forum.dayton360mods.com/showthread.php?1017-PROGSKEET-PROGRAMMER-V1-0&p=3266#post3266):

Download: Software-Progskeet-programmer.zip

  • Available the new ProgSKEET Programmer V1.0
  • It exchanges the old Infectus programmer. It is 2x more faster and support any ACTEL device A3P family.
  • AutoGG is releasing soon the support of this programmer also.
  • All new stocks of ProgSKEET FULL have inside this new programmer instead old Infectus.

Instructions:

ProgSKEET Programmer V1.0

  • Connect the ProgSKEET programmer to your USB port (windows)
  • Install the ProgSKEET-programmer-USBDrivers
  • Open the Command Line of your windows (search CMD.EXE and execute it)
  • Use the command "CD" to reach the "SOFTWARE DIRECTC" directory. Example "CD" c:/document and setting/pippo/desktop/progskeet-programmer/software directc"
  • Place in the same directory of the "directc.exe" the file .DAT that you want to program
  • Type the command "directc -aprogram filename.dat"

PS3 News's Avatar
#100 - PS3 News - 39w ago
Below is a new Winskeet and Bitstream Progskeet 1.2 released from uf6667 (via forum.dayton360mods.com/showthread.php?1004-New-Winskeet-Bitstream-1-2) who states the following:

Winskeet40000 & Bitstream Progskeet 1.2 Downloads: WinSkeet_130708_1211.rar / Winskeet_130710_1058.rar (10/07/2013) / Winskeet_130713_1838.rar (13/07/2013) / Winskeet_130715_1749.rar (15/07/2013)

About: Ok so I've been working hard on this (like every hour of almost every single day since the last release) and frankly I can't remember every single modification I've made.

I'm still building the bitstreams for 1.0 (white), 1.1 (blue), 1.2 alpha (green, if you've been naughty enough to get one) SO BE PATIENT, MY PROMISE STILL STANDS. It's also coming to Linux and Mac, don't worry! The command line will have to wait a bit longer, I just can't be bothered with it right now (so much other shit I need to take care of first).

If there is any problem WHATSOEVER, please let me know.

I haven't added the bit yet where it tells you which lines might be out of order but I will as soon as I manage to get it working reliably. NAND, due to the promise of releasing within 24 hours, couldn't be fully tested, so I'd appreciate if, only if problems arise, you could detail the problems as much as possible.

Also, regarding my absence: all of this testing takes a lot of time, even more so than school, so I didn't have time to come on IRC or twitter. I'll be more active on twitter from now on: uf6667

BIG THANKS TOTITTY FROM CONSOLE OPEN FOR SENDING ME A PROGSKEET FULLY SOLDERED

Changelog:

  • Added speed indicator
  • HIGHLY improved single word flashing
  • Added hardware data polling (this was a tough one, even I have to tap my shoulder for this; oh, and it uses this by default)
  • Both NAND and NOR are in one bitstream now (!!!)
  • No more pullups needed (!!! WICKED, INNIT THO !!!)
  • Reverted to libusb-win32 because it gives me less shit, but depending on feedback, I'll add libusb0
  • Did I mention it's fcking fast? it's going to become even faster, I just wanted to keep my promise, somewhat, of releasing within the next 24h
  • Tooltips (can't remember if it was in the last release?)

130713: buffer write works, about 70 seconds for 16MB spansion (which used to require 15 minutes!) updated bitstream

130715: buffer write and single word improved, I write an entire 16MB nor, buffer write, in about 40 seconds (not including read and erase, duhhhhhhhhh), 3 seconds per sector for single word (spansion is very fast now too) AUTODETECT OF THE NOR!!!! just click "dump CFI"

amazon's Avatar
#99 - amazon - 44w ago
Hi, I have a question maybe someone can help me answer. I've recently downgraded two ps3s, both were NANDs with progskeet 1.1 and now I'm interested in downgrading NOR ps3s. From what I understand, with NOR, you don't have to program the progskeet 1.1 with injectus, but would I have to reset the progskeet 1.1 somehow because I've uploaded code to it via injectus (during my NAND downgrades)? Thanks.

sumotori's Avatar
#98 - sumotori - 45w ago
I had a slim PS3 with firmware OFW 4.41.

I made:

  • A dump of the nor with ProgSkeet 1.21
  • Verified the dump with Bwe_Nor_Validator. Results: Dump valid.
  • Patched dump with Rogero_Auto_Patcher v0.04
  • Flash the nor with ProgSkeet 1.21.
  • A new dump to compare it with the patched dump. Results: no difference.

Now, at startup, the PS3 asks me to insert a USB disk with firmware 4.41 or higher!!! When I inserted a disk usb I have the error 8002F2CF. Could someone help me? Thanks

PS3 News's Avatar
#97 - PS3 News - 55w ago
ProgSkeet 1.2 Bitstream 2013-03-30 by uf6668 is attached below, which fixes NOR issues with the following changes:

The long awaited fix for Progskeet 1.2 is finally here, uf6667 confirms this should fix the write issues people were getting with 1.2.

Download: ProgSkeet_12_130330_1909.dat / ProgSkeet_12_130330_1909[1].dat (Mirror) / ProgSkeet_12_130401_1824.rar‎ / ProgSkeet_12_120402_1730.rar‎

  • Dual boot using a switch (led on = secondary nand/nor, led off = primary nand/nor).
  • Supports both solderless nand and nor together. This should fix the write issues people were getting with 1.2.

ProgSkeet 1.2/1.21 BITSTREAM_12_130401_1824 (via forum.dayton360mods.com/showthread.php?947-Progskeet-1-2-1-21-bitstream-Mar-30-2013&p=2850#post2850) is the second progskeet v1.2 fix NOR bitstream.

ProgSkeet 1.2/1.21 BITSTREAM_12_120402_1730 (via forum.dayton360mods.com/showthread.php?947-Progskeet-1-2-1-21-bitstream-Mar-30-2013&p=2850#post2850) is another updated bitstream, again to fix the NOR read / write issues on the 1.2 / 1.21 progskeet.

ProgSkeet_12_130402_1730.dat
+ Added metastability to the DQ ports to filter out noise and glitches

ProgSkeet_12_130401_2010.dat
+ Reduced timeout from 1.3ms down to 320ns per word

ProgSkeet_12_130401_1824.dat
+ Added timeout for reads/writes (1ms), no more blocking
+ Fixed bug where it would read gpio from data pins rather than from gpio pins

ProgSkeet_12_130330_1909.dat
+ Increased metastability of USB (should no longer disconnect)
+ Restored Samsung Q compatibility that was caused by dualboot pin allocation

All known / released Progskeet 1.2 Bitstreams:

Download: Progskeet1.2_Bitstreams.rar (1.68 MB)

  • ProgSkeet_12_121018_0031
  • ProgSkeet_12_121101_1223
  • ProgSkeet_12_121106_2121
  • ProgSkeet_12_130401_2010
  • ProgSkeet_Bitsream_12_130330_1909 [converts_to_works_as_1.1]
  • ProgSkeet_12_120402_1730
  • ProgSkeet_12_130401_1824

Winskeets/Yaskeet/Progskeet:

Download: Winskeet.rar (22.6 MB)

  • ProgSkeet_110807
  • YASkeet_20111120
  • WinSkeet40000_111004
  • WinSkeet40000_manual_test
  • Winskeet111120
  • Winskeet111205

Finally, from uf6667 (via progskeet.com/forum/viewtopic.php?f=13&t=109417):

[uf6667]: https://dl.dropboxusercontent.com/u/52587949/Progskeet_12_130415_2058.rar
[uf6667]: nand and nor
[uf6667]: nor CONFIRMED working perfect
[uf6667]: if someone's eager to test nand, this is the one
: WinSkeet40000_130416_2305













Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News