ProgSkeet v1.2 for PlayStation 3 is Incoming, Features Outlined


83w ago - Following up on their previous PS3 release, today Oscar Dalvit has announced that ProgSkeet v1.2 for the PlayStation 3 is incoming with the features outlined below.

To quote: Dear Customers, PROGSKEET V1.2 is in production, release: first week of October (maybe early)

Here some infos in preview:

1- Redesign of main board now more small and stable (4 layers)
2- Slave board with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs
7- 1 Mbit SPI FLASH memory on board

The package content:

  • 1x PROGSKEET V1.2 + SLAVE BOARD
  • 1x ADAPTOR PCB PROGSKEET

The main improve of the new PROGSKEET V1.2 solution will be the support of DUAL NOR / NAND on different consoles. NOR and NAND CLIPS are not anymore official supported, we decide to move on QSB BOARDS, more cheaper and sure more stable then CLIPS. Soon news also about these accessories.

More infos about specs of new WINSKEET and SOFTWARE will be posted soon.

Preorders of the first limited production are open! Contact us!

Update: ProgSkeet Black Tar Edition 1.2 - We are happy to present you the new PROGSKEET V1.2.

This new progskeet version introduce these changes:

1- Redesign of main board now more small and stable (4 layers)
2- Slave baord with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs

Finally progskeet team stop to supprot CLIP tools, too much expensive and with a really bad quality. The alternative will be nice QSB BOARDS NOR / NAND for different consoles that will be soon available.

The kit now works exactly like PROGSKEET V1.1 but soon new features will be added. More infos about new specs will be released on official Web site.

The kit include:

  • 1x PROGSKEET 1.2 + SLAVE BOARD
  • 1x PROGSKEET ADAPTOR PCB BOARD








Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 106 Comments - Go to Forum Thread »

Quick Reply Quick Reply

racer0018's Avatar
#81 - racer0018 - 69w ago
I seem them out And they seem like they would work. However the progskeet 1.2 are having a lot of problems with writing to ps3s. I would wait into they get it figured out with a bitstream update. They can read the ps3 fine but can't write to it. Thanks

Saint69's Avatar
#80 - Saint69 - 69w ago
See lot's of mention of the PS3 Quick Solder Board for Progskeet but does this thing actually exist or is it just a concept?

D

Anger007's Avatar
#79 - Anger007 - 71w ago
according to what i hear the latest bitstreams for 1.2 dont support flashing yet and i also believe they are working on it atm. im using an early bitstream flashed to my 1.2 and am in the middle of soldering so i will let you guys know how it goes, once completed.

pedromaiaz - it is recommended to set the delay to 200 instead of 50 as your video. however if your using clips i would strongly recommend you not use them as they are unreliable at best. soldering a nor is a very easy job.

i'm currently soldering a nand and by geez its a hard job. all you need is the correct number and length of wires. i always use 10 cm lengths and, once checked for shorts or bad soldering, i have never had a failure reading or writing however that was with a 1.0 so i'm eager to see how the 1.2 fares against a nand.

racer0018's Avatar
#78 - racer0018 - 72w ago
I have gotten the progskeet 1.2 to take a flash. I also have gotten it to read a ps3 but will not write to one. I will keep doing some work with it as I go and see if I can find a way to make this work. Once I do I will make a guide. Thanks

orangeworx's Avatar
#77 - orangeworx - 72w ago
Hey there,

I hope you could clarify a couple things for me

- first image = that's the 1.0 right

- the other 4 images are for NOR but they aren't the same... the 2 board pics are obviously of different motherboards without indication of which ones they and the pin naming is messed up, there are the Dxx, the D0xx and the DQxx.. are these referencing the same thing?

- also that's for NOR... what about NAND/Dual NAND soldering pin schematics... can't find "clear" info on that, the 1.2 manual states "zoom in on picture for details" when the image looks crappy at 100%... 200%+ all characters look the same - gibberish.

On a side note, I've read the clips aren't recommended, would you have info on that as well? I've been looking around and reading about this stuff for months now and got my 1.2 (full kit w/o clips) about a week ago when i heard it got released.

Reason i picked this over the E3 is because I understood progskeet did NANDs and NORs whereas the E3 had 2 packages, one for each. I still haven't had the chance (nor time or the proper information) to play around with it, I just want to get my facts straight

thanks for your time...













Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News