36w ago - Following up on their
previous PS3 release, today
Oscar Dalvit has announced that ProgSkeet v1.2 for the PlayStation 3 is incoming with the features outlined below.
To quote: Dear Customers, PROGSKEET V1.2 is in production, release: first week of October (maybe early)
Here some infos in preview:
1- Redesign of main board now more small and stable (4 layers)
2- Slave board with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs
7- 1 Mbit SPI FLASH memory on board
The package content:
- 1x PROGSKEET V1.2 + SLAVE BOARD
- 1x ADAPTOR PCB PROGSKEET
The main improve of the new PROGSKEET V1.2 solution will be the support of DUAL NOR / NAND on different consoles. NOR and NAND CLIPS are not anymore official supported, we decide to move on QSB BOARDS, more cheaper and sure more stable then CLIPS. Soon news also about these accessories.
More infos about specs of new WINSKEET and SOFTWARE will be posted soon.
Preorders of the first limited production are open! Contact us!
Update: ProgSkeet Black Tar Edition 1.2 - We are happy to present you the new PROGSKEET V1.2.
This new progskeet version introduce these changes:
1- Redesign of main board now more small and stable (4 layers)
2- Slave baord with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs
Finally progskeet team stop to supprot CLIP tools, too much expensive and with a really bad quality. The alternative will be nice QSB BOARDS NOR / NAND for different consoles that will be soon available.
The kit now works exactly like PROGSKEET V1.1 but soon new features will be added. More infos about new specs will be released on official Web site.
The kit include:
- 1x PROGSKEET 1.2 + SLAVE BOARD
- 1x PROGSKEET ADAPTOR PCB BOARD
First you need to check if its downgradable or not,how?
check the model number if its CECH25XX or lower then you can downgrade it,if its CECH3000 or ...
I hope you could clarify a couple things for me
- first image = that's the 1.0 right
- the other 4 images are for NOR but they aren't the same... the 2 board pics are obviously of different motherboards without indication of which ones they and the pin naming is messed up, there are the Dxx, the D0xx and the DQxx.. are these referencing the same thing?
- also that's for NOR... what about NAND/Dual NAND soldering pin schematics... can't find "clear" info on that, the 1.2 manual states "zoom in on picture for details" when the image looks crappy at 100%... 200%+ all characters look the same - gibberish.
On a side note, I've read the clips aren't recommended, would you have info on that as well? I've been looking around and reading about this stuff for months now and got my 1.2 (full kit w/o clips) about a week ago when i heard it got released.
Reason i picked this over the E3 is because I understood progskeet did NANDs and NORs whereas the E3 had 2 packages, one for each. I still haven't had the chance (nor time or the proper information) to play around with it, I just want to get my facts straight
thanks for your time...
i`ve trim a bit the progskeet adaptor.... like i read and it fits ok! but i have to put more presure on the clip?? but how?
i sending one small video http://www.mediafire.com/?pkcs6o0sfdxuyys
thanks in advance
QSB is far more cheaper than clips since you can only used this once, so if you removed it, then you have to get another one.
Either way can someone give me information as had issues downgrading with E3 (not recognised) despite being compatable so wanted to try progskeet but have zero soldering experience.
I wanted to do a solderless install
I am stuck with no success and YLOD ps3... Yeah i know i know ... So i though meiby there is someone that actauly tried the progskeet 1.2 and understand all the pins and bitstreams and etc.
I will attach the diagrams i've been using and which points i soldered. I will be really thankful for helping me out. as well sorry for my english. so these are my questions :
1 ) Infectus/Injectus can i reupdate the tool if i experienced an error during the firs cennection? Software does recognize it but just to be sure a clean update would be safer.
2 ) Injectus/Infectus what does the 1 & 2 switches do? do they mean anything to the progskeet 1.2 board for uploading the bitstream? both up - both down does the operation with success. 1up 2down no joy. 1down 2up done sucessfully.
3 ) Progskeet 1.2 Bitstream 12_121106_2121 does it change the pin layout from the old one ? because i found in progskeet forum 2 different layouts (i think) 1st is the original one pdf file from instructions & the 2nd one is from progskeet man on twitter.
4 ) Progskeet 1.2 SlaveBoard switch : on , off (green light) i do know that it is for nand 1st and 2nd nand to choose witch one to read. But does it actually do anything for the NOR chips?
5 ) E3 Flasher usb connection what is that for ?
6 ) I attached pictures of my soldering and a picture of the list of points which i soldered to motherboard from progskeet 1.2 is there any mistakes?
7 ) Is the pinouts from attached files any different? pinout legacy and progskeet manual. Because i used the progskeet manual for the newest bitstream 12_121106_2121?