Sponsored Links

Sponsored Links

ProgSkeet v1.2 for PlayStation 3 is Incoming, Features Outlined


Sponsored Links
106w ago - Following up on their previous PS3 release, today Oscar Dalvit has announced that ProgSkeet v1.2 for the PlayStation 3 is incoming with the features outlined below.

To quote: Dear Customers, PROGSKEET V1.2 is in production, release: first week of October (maybe early)

Here some infos in preview:

1- Redesign of main board now more small and stable (4 layers)
2- Slave board with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs
7- 1 Mbit SPI FLASH memory on board

The package content:

  • 1x PROGSKEET V1.2 + SLAVE BOARD
  • 1x ADAPTOR PCB PROGSKEET

The main improve of the new PROGSKEET V1.2 solution will be the support of DUAL NOR / NAND on different consoles. NOR and NAND CLIPS are not anymore official supported, we decide to move on QSB BOARDS, more cheaper and sure more stable then CLIPS. Soon news also about these accessories.

More infos about specs of new WINSKEET and SOFTWARE will be posted soon.

Preorders of the first limited production are open! Contact us!

Update: ProgSkeet Black Tar Edition 1.2 - We are happy to present you the new PROGSKEET V1.2.

This new progskeet version introduce these changes:

1- Redesign of main board now more small and stable (4 layers)
2- Slave baord with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs

Finally progskeet team stop to supprot CLIP tools, too much expensive and with a really bad quality. The alternative will be nice QSB BOARDS NOR / NAND for different consoles that will be soon available.

The kit now works exactly like PROGSKEET V1.1 but soon new features will be added. More infos about new specs will be released on official Web site.

The kit include:

  • 1x PROGSKEET 1.2 + SLAVE BOARD
  • 1x PROGSKEET ADAPTOR PCB BOARD








Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 107 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

ripplar's Avatar
#107 - ripplar - 22w ago
Have any of you guys heard of this coming out in May. I am thinking about getting this. As I like ProgSkeet better than E3.

Your guys thoughts?

Please

P.S. I have seen it for $5. I think it might be a great investment..

jensen76's Avatar
#106 - jensen76 - 42w ago
Quote Originally Posted by msteffes View Post
is there a better flasher for nand chips?


yes the teensy ++ 2.0 works way better than this.

alfndm's Avatar
#105 - alfndm - 43w ago
Thanks for all the good and wonderful follow-ups..

racer0018's Avatar
#104 - racer0018 - 43w ago
No, this is about the best as it gets. Thanks.

Update: Progskeet V1.21 Signal-Booster by esprit1711 (via psxtools.de/thread.php?postid=570022#post570022) roughly translated:

Hello. First of all, sorry for my bad English.

We all know how good the Progskeet V1.1 is and how hard it is to get one of this these days. But on the other hand, the Progskeet V1.21 no one wants, cause everyone know about the problems (never detect the correct NAND ID, freeze at read or write operation...).

The solution of the problem is not very difficult. hjudges has recognized the problem at his first NANDway Software (where you can select which NAND (NAND0 or NAND1) you want read/write). He changed the software and wiring, so the Teensy focus 5 Lines per signal line.

The StarShip2 (the NAND Controller on the PS3 Board, which manage the NAND ICs) set a High Signal on some signal lines. Without this modification, whenever the Teensy (or Progskeet V1.21) want set the signal low, the voltage level is not low enough (at the Progskeet I measure circa 1,5V). The level is therefore undefined.

Moreover the Flat-cable between Progskeet and Slave board is too long (who has the idea, a 40cm cable is ok???).

I develop a piece of Hardware which make the same for the Progskeet, what hjudges makes with the NANDway Signal-Booster. I replaces the Y-board between Progskeet and NAND-Clip and Boost the relevant Lines. I got positive feedback from every User which got a Signal-Booster from me.

A disadvantage compared to the ProgSkeet V1.1 is unfortunately the stability if the NAND is powered by the USB port. mostly this worked, but sometimes it freezed. to fix this problem, I added a 5V to 3,3V voltage regulator and a 5V power supply, which work perfect every time (you can leave off the regulator, if you use directly a 3,3V power supply).

I designed two PCBs. the first PCB is a little bit greater than the second, but its designed as a single-Layer board (with a few simple bridges)

The second PCB is less then the first and have additionally a voltage regulator scheduled, but is a 2-Layer Board.

(I placed the xgerber files and the project data in the zip file. you can send this pack directly to your PCB Service)

Single-Layer Board (without voltage regulator): [Register or Login to view links]

Dual-layer Board (with voltage regulator): [Register or Login to view links]

You need the following parts:

  • 1x 15-Pin flat cable pitch 0.5mm (15cm or shorter)
  • 1x 5V power supply (3A should be enough)
  • 1x 5V to 3,3V voltage regulator (LMS1587CS-3.3)
  • 1x 32-Pin FCC flat cable connector, pitch 0.5mm
  • 1x 50-Pin FCC flat cable connector, pitch 0.5mm
  • 1x 10F tantalum SMD-0805
  • 4x 100nF capacitor SMD-0603
  • 4x 74HCT08 SOP14 or 74HC08 (the other 74... 08 variants are not CMOS compatible)

I hope I could help someone, with kind regards.

esprit1711 from psXtools Team

msteffes's Avatar
#103 - msteffes - 43w ago
is there a better flasher for nand chips?

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News