Sponsored Links

Sponsored Links

Guide: PS3 Slim CFW 3.55 to OFW 3.70 with 2 HDDs Fast Swap


Sponsored Links
174w ago - Following up on the initial PS3 Slim 3.70 Downgrade and PS3 3.7x Downgrade for Slims and Fats with NOR Flash news, this weekend Italian PlayStation 3 hackers DiGiTaLAnGeL (linked above) have made available a guide to fast swap PS3 Slim CFW 3.55 to OFW 3.70 with 2 HDDs and ProgSkeet followed by a New Method - PS3 Downgrade v2 Supports all NOR Flash from TwoStone.

To quote, roughly translated: Today I'll write a tutorial to "fast-swap" between CFW 3.55 and OFW 3.70, using 2 HDDs... at the end of the tutorial, you'll be able to swap between the firmware just flashing a dump on your PS3 using Progskeet. (instead of downgrading and losing all data).

The first steps are not so easy, so take your time and go on, by the way, you must have some skill with Progskeet, and it must be 100% working on your console.

What we need:


We need 2 HDD because the NOR flashes stores some parts of the current FW on the HDD so we will need 2 HDDs, one is for 3.55, and one is for 3.70.. We will call those HDD "A" (for 3.70) and "B" (for 3.55) don't mix them up!

Starting with a PS3 Slim with OFW 3.70.

1. Plug in HDD "B", format and prepare it if it's required by the PS3 and you should have your 3.70 up and running.
2. DUMP your actual NOR and call it "original dump 3.70.bin"
3. Now flash your "downgrade.bin" (edited with the personal data found in "original dump 3.70.bin")
4. Turn on your PS3 and be sure that the PS3 is asking you to press the PS button (downgrade.bin flashed correctly )
5. Insert a 3.55 Downgrade dongle and enter factory/service mode.
6. Copy Lv2Diag.self by Jaicrab and the 3.55 NO CHECK UPDATE renamed as "PS3UPDAT.PUP" in the root of your USB Stick.
7. Plug in the USB Stick in the most-right USB port of your PS3 and wait for it to turn OFF.
8. Leave the factory mode using the other Lv2Diag.self
9. After the reboot, you need to configure and set up your system... now you have a fully working 3.55 CFW based on KMEAW "NO CHECK".
10. DUMP your actual NOR and call it "swap dump 3.55.bin"
11. Unplug HDD B and Plug in HDD A.
12. Turn on your PS3, plug in your USB Stick containing official 3.70 update and press start+select when asked.
13. When the PS3 reboots, check that the system is fully working and DUMP your actual NOR and call it "swap dump 3.70.bin".

NOW IT'S OVER! You should have "swap dump 3.55.bin" and "swap dump 3.70.bin" ... Now you just have to swap HDD and flash the corresponding dump:

  • HDD A = swap dump 3.70.bin
  • HDD B = swap dump 3.55.bin

WARNING: Do not install other CFW than the "NO CHECK" one... because it's used to make the "fast-swap" working... if you flash something different you will not be able to go between the 2 FWs. This CFW disable the Syscon checking at the startup... so it will not freeze or complain when the syscon says "3.70″ and your FW is 3.55

In case you wanna update your console with a future "3.80″ or-so firmware. Do not update your console when you are running 3.55 firmware! You have to go to "swap dump 3.70.bin" and then update as usual (XMB or recovery)... By the way, the downgrade is confirmed working only on 3.70... we haven't tested it on other FWs, you could lose the possibility to go back to 3.55!




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew releases!

Comments 94 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles.
 
#69 - michael040990 - 172w ago
michael040990's Avatar
i'm not sure i haven't used no check but if you install a ofw over a cfw the cfw is deleted and the ofw will look at the hard drive for the ofw drive and if you put a cfw drive in it wont be recognized by the ofw on the nand.
Quote Originally Posted by elser1 View Post
you sound like you have the knowledge to do what you say.. well done mick!!

thank you i'm just trying to learn everything i can i have much to learn.

#68 - Marsupilami - 172w ago
Marsupilami's Avatar
Quote Originally Posted by Marsupilami View Post
I've got a PS3 with CFW3.55, can I install CFW3.55 no check and then swap the HDD and install OFW3.70?

I don't have Progskeet and I don't want to have it btw...

anyone got an answer for that? once again, I'd like to install cfw3.55nocheck on my cfw3.55, after that, I put in a new HDD, install ofw3.70 and done.

Does that work? If not, why?

#67 - elser1 - 173w ago
elser1's Avatar
you sound like you have the knowledge to do what you say.. well done mick!!

#66 - HeyManHRU - 173w ago
HeyManHRU's Avatar
Quote Originally Posted by michael040990 View Post
i wish i could afford one of these chips i'm thinking about putting all the information i read about in this fourm and others in one organized website dedicated to downgrading and mods i need help extracting all the pertinent information though.

Another good idea I'm just waiting for a simple and easy downgrade/dual booting method.

#65 - michael040990 - 173w ago
michael040990's Avatar
and i wanted to be original darn lol great minds think alike also if you didn't want to go through all the trouble of the dual nand you could always hock your infectus up permanently to your ps3 and then make a new mini usb port on the back of your ps3 buy cutting and wiring up a male usb to female mini usb then use a usb to mini to cook it to your computer when you need to flash.

i wish i could afford one of these chips i'm thinking about putting all the information i read about in this fourm and others in one organized website dedicated to downgrading and mods i need help extracting all the pertinent information though.

 

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News