E3 Flasher for PS3 is Coming from Team E3DIY with Dual-Booting


139w ago - Similar to the ProgSkeet hardware device for PlayStation 3, today the E3DIY Team have announced that they will be releasing an E3 Flasher for PS3 (produced by Paul Owen and marketed by Gary Wayne Bowser aka GaryOPA) which will feature dual-booting among the options detailed below.

To quote: E3 Flasher, the world first flasher special for PS3, easier backup and downgrade, support dual boot, coming soon!

E3, created miracles on PS3 JailBreak, release free JailBreak, downgrade and goldfinger, and will now release a full new revolutionary E3 Flasher which includes: backup, restore, upgrade, downgrade and dual boot all in one.

PS3 E3 Flasher Features:

  • NOR FLASH ON board.
  • 1 KEY backup or restore, simple is best.
  • Dual boot, choose booting from original bios or E3 bios.
  • 3 save MODE, save bios to E3 nor flash, TF card or PC.
  • NO harm for console, but can longer console life because of specially design.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • Compatible all slim and fat console, include latest 3000x version.

Don’t forget E3DIY team, which free service always It said they were studying BIOS, Let’s wait and see what happens. And please note the new E3 domain www.e3-tech.net, more details coming soon!

PS: E3DIY Team note 3.7 downgrade, so maybe E3 Flasher will downgrade automatically, no need modify on PC. Thanks all guy whom contribute PS3 JailBreak.

Follow-up: E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER !

In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operation
is very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !
we not record any image about E3 FLASHER regards it’s not release by far, hope eveyone understand.

The official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console.. with slim console no need solder wire but fat console need.

E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER ! In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operations very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !

we not record any image about E3 FLASHER regards it’s not release by far, hope everyone understand. the official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console .with slim console no need solder wire but fat console need.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 684 Comments - Go to Forum Thread »

Quick Reply Quick Reply

akimazaki's Avatar
#664 - akimazaki - 25w ago
Use e3 linker... solder to the point

unknown92's Avatar
#663 - unknown92 - 25w ago
hey guys i have problem with this console its not my 1st i done 100+ consoles but this one made me mad ! i have phat console cechm03 installed the clip using foam method and got my backup and started the downgrading but somehow i lost the power its bricked now i soldered the tristate point to GND like always but when i power it up the flasher not working anymore no leds on nothing at all.

changed the foam with new one nothing worked i have new e3 flasher package used the clip got nothing used the 3rd clip and nothing used the new one nothing at all it keeps bricking no leds i cant get connection from NOR clip to the flasher using the clip any one faced this problem before

patientGrim's Avatar
#662 - patientGrim - 25w ago
Hello not new just in the back ground a lot. I dont like to ask a lot of questions in fact i don't think i have ever asked one. But I need help. So i was one of the impatient ones that downloaded rogero cfw 4.21 many moons ago. and my CECH-2501A Bricked, So i waited, well today i got my e3 flasher and card reader. I thought i had everything nice and ready.

I got a samsung multi consul update.bin. put it on my micro sd card, and bam! all 8 lights turned on. Well i found out others were having this problem and fixed it with another update.bin...WELL! i have been threw like 12 of the update.bins and still the same results.

All 8 lights turn on at once, and then the update.bin is gone from the sd card so i try and do a nor back up. Well lights 1, 5and 6 blink and the note file on the sd card says (start logging... backup PS3 BIOS.fail to initialize E3 Nor.) Im sure this is because of the update.bin not installing. I assume I installed the e3 flasher well, i have done it like 6 times before doing it on my own. What am i missing someone please help?

PS3 News's Avatar
#661 - PS3 News - 26w ago
Today E3 released a statement about changed parts on the E3 ODE Pro below, as follows:

How to tell if you have a new PCBoard, and What models you need to make the change for!

s3nint3!There was a lot of confusion after the E3 Team said you needed to change some small SMD parts on the PCBoard to allow v1.2 and higher to work, now the team has issued a statement to clear up that confusion.

2013-10-17

The russian version E3 ODE PRO installation manual and operation manual added in the download page (attached below).

The E3 ODE ISO TOOL v2.0 updated in the download page (attached below).

E3 ODE PRO Update

  • E3 OS v1.22 for 2XXX-3XXX USER
  • E3 OS v1.21

Download

  • E3 ODE PRO Installation Manual
  • E3 ODE PRO User Manual v1.1 (English)
  • E3 ODE PRO User Manual v1.1 (中文
  • E3 ODE PRO Installation Manual and operation manual (Russian)
  • E3 ODE PRO ISO TOOL V2.0

2013-10-16

Some user want to know how to indentify the E3 ODE PRO mainboard is new batch or old 1.0 version. If there has red color on the pcb as picture showes, it means new batch 1.2 version from factory.

As fact, it is necessary for only 4K 12G console user to exchange that four components. We are sorry take problem for those users even the affected user rarely. Any 1.0 mainboard user can exchange the new 1.2 mainboard free from his reseller.

E3TEAM won't do irresponsible things like JB2 give up his user and change to another pious face. From E3 CARD READER to E3 FLASHER, and then E3 ODE PRO, we always do best to help user and provide positive solution.

The PS2 ISO, BD MOVIE ISO, DVD ISO and PS1 ISO have run successfully on E3 ODE PRO, we will release the new update soon to allow all E3 ODE PRO user enjoy those amusing function.

didin's Avatar
#660 - didin - 26w ago
I find the e3 file in sd card ode, perhaps there is a need.. here is the link: http://www.4shared.com/archive/FPWEM-_T/e3_ode_filetar.html

From Abkarino: Hi, i had downloaded this file and it seems that this is an unecrypted version of Linux OS that runs on top of E3 ODE Pro!!! And also it hold the database files with keys for a supported boot disk also. Could you please inform us how did you obtained this files? Do have access to its source code? Could you offer more details/files about this?

BTW i had downloaded this file and looked into its content and it seems this it is not a complete Linux distro for this embedded system E3 ODE Pro.

From zecoxao: that's a dump of the e3 ode iirc. and no, it's not fake.













Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News