Sponsored Links

Sponsored Links

E3 Flasher for PS3 is Coming from Team E3DIY with Dual-Booting


Sponsored Links
170w ago - Similar to the ProgSkeet hardware device for PlayStation 3, today the E3DIY Team have announced that they will be releasing an E3 Flasher for PS3 (produced by Paul Owen and marketed by Gary Wayne Bowser aka GaryOPA) which will feature dual-booting among the options detailed below.

To quote: E3 Flasher, the world first flasher special for PS3, easier backup and downgrade, support dual boot, coming soon!

E3, created miracles on PS3 JailBreak, release free JailBreak, downgrade and goldfinger, and will now release a full new revolutionary E3 Flasher which includes: backup, restore, upgrade, downgrade and dual boot all in one.

PS3 E3 Flasher Features:

  • NOR FLASH ON board.
  • 1 KEY backup or restore, simple is best.
  • Dual boot, choose booting from original bios or E3 bios.
  • 3 save MODE, save bios to E3 nor flash, TF card or PC.
  • NO harm for console, but can longer console life because of specially design.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • Compatible all slim and fat console, include latest 3000x version.

Don’t forget E3DIY team, which free service always It said they were studying BIOS, Let’s wait and see what happens. And please note the new E3 domain [Register or Login to view links], more details coming soon!

PS: E3DIY Team note 3.7 downgrade, so maybe E3 Flasher will downgrade automatically, no need modify on PC. Thanks all guy whom contribute PS3 JailBreak.

Follow-up: E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER !

In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operation
is very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !
we not record any image about E3 FLASHER regards it’s not release by far, hope eveyone understand.

The official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console.. with slim console no need solder wire but fat console need.

E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER ! In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operations very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !

we not record any image about E3 FLASHER regards it’s not release by far, hope everyone understand. the official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console .with slim console no need solder wire but fat console need.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 711 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

bbisd12's Avatar
#701 - bbisd12 - 4w ago
thanks!

aidarin's Avatar
#700 - aidarin - 4w ago
Tell me guys, how to downgrade firmware 3.55 to 3.41, with a broken drive by the E3 Card Reader?

Problem such, the console is turned on, then a black screen, and after a few seconds it turns off, it may have other methods of recovery?

Ultratails42's Avatar
#699 - Ultratails42 - 11w ago
I actually had this question recently myself as I too was getting ready to buy one. The answer I got with a helpful tutorial from playerkp420 was no using the noFSM Method.

That what I was told to do and it worked great. Downgraded 2 PS3's that way:

noFSM METHOD - No FSM dongle needed, and will not format your HDD

1. After making your backups continue here and leave your PS3 on. There is no need to reboot. If you patched your dump with the validation guide in Chapter 1, you can skip to step 8.
2. Download PS3 Flash Tool v4.55.rar ([Register or Login to view links]) if your PS3 is on OFW 4.55. Or download PS3 Flash Tool v4.60.rar ([Register or Login to view links]) if your PS3 is on OFW 4.60. Using the one for your firmware version, will allow your PS3 to boot to the XMB. You can still use either if on a lower OFW, but will boot to a recovery screen instead. Where you can install the CFW from there. So doesn't really matter what version you use.
3. Extract to Desktop or where ever you like.
4. Put your bkpps3.bin in the PS3 Flash Tool folder.
5. Drag and drop the bkpps3.bin onto ps3_dump_tool.exe
6. The program will open, validate (Hopefully you already validated above. But at least this may tell you if you missed something.), and ask if you want to patch it. Say yes and wait for it to apply the patches.
7. Now there will be a new file named bkpps3_NOR_patched.bin.
8. Delete all files from your sd card and put the bkpps3_NOR_patched.bin on it, renamed to bkpps3.bin
9. Put the sd card in the flasher.
10. Put all switches down on flasher. And press the red reset button under the esata plug on the faceplate.
11. Press start on flasher, and wait for blue leds to light up 1 by 1. When done lights will alternate flash. [You will need the blu ray drive and the HDD, attached for the next steps. So if you are going to remove the flasher, now would be the time to do so. Rebuild and change the thermal compound, with Artic Silver 5.]
12. Reboot PS3 from XMB or simply turn it on.
13. On boot you should see "please connect controller screen" (If your PS3 is on OFW 4.55 and you patched to 4.55, or on 4.60 and patched to 4.60 you will boot to the XMB. You can Install 4.55 CFW or later of your choice [for easier changing CFWs later on, I strongly suggest using the 3.55_Rogero_Dowgrader_RSOD.PUP ([Register or Login to view links]), and finish the rest of the guide] from XMB -> Settings -> System Update)
14. If you were on any other OFW than 4.55 and get the "please connect controller screen" then CONNECT THE CONTROLLER!
15. Put 4.55 CFW or later of your choice [for easier changing CFWs later on, I strongly suggest using the 3.55_Rogero_Dowgrader_RSOD.PUP ([Register or Login to view links]), and finish the rest of the guide] of your choice on your flash drive like this:

[Register or Login to view code]

If you are on OFW 4.55, you have to install 4.55 CFW or a CFW that syscon is changed to a higher version. If you are on OFW 4.55, use 4.55 CFW or higher. I strongly suggest using 3.55_Rogero_Dowgrader_RSOD.PUP ([Register or Login to view links]), then continue with Qa Flag and Installing OFW 3.55. Then update to any CFW. This will make for easier downgrading back to 3.55 or switching CFWs later. Qa Flag can not be enabled on 4.50, 4.53, or 4.55.

WARNING: If Minimum version checker said your PS3 can only go to 3.56, Do not use rogero downgrader. Use this REBUG 4.46.1 REX with syscon changed to 9.99 ([Register or Login to view links]). Then install Rebug toolbox from Package Manager>Install Package Files>PS3 Hard Disk. Open the toolbox and go all the way right, and enable Qa flag.

Then you can install any CFW you want, from the recovery menu or using Condor Updater ([Register or Login to view links]). Then you are done, and would only need to install any homebrew apps you want. First one I would suggest is multiMAN 04.60.00 BASE CEX.pkg] ([Register or Login to view links].

Get either Rogero 4.55 v1.00 from here, or REBUG 4.46.1 LITE or REX CFW, or Habib 4.60 or REBUG 4.53.3U REX COBRA. Always download CFWs from a trusted place and check the md5s of any firmware you are going to install, with this tool: [Register or Login to view links]

16. Insert into the right usb port of the PS3 and follow the on screen instructions, hold start and select. Or install from XMB system update if the PS3 was on OFW 4.55.
17. You will now boot to CFW.
18. If you went straight to 4.50, 4.53, or 4.55 CFW, Install the CFW again from System Update in the XMB. This will fill both ros0 and ros1 in the flash, to the same version. I have experienced some errors, when not installing the CFW 2 times. And is why I suggest using the downgrader pup and continuing with Qa Flag, etc...

kevingsp's Avatar
#698 - kevingsp - 11w ago
i'm gettin ready to purchase an E3 Flasher hit. it for my style of ps3 a fat32 console cechp01 nor flash and the consoles ofw was 2.50 now running ofw 4.50... SO I'M WONDERING ABOUT THE DONGLE??

what is and do i need to add it to my kit when ordering because it does have an option for a pre-programmed one

Pcow's Avatar
#697 - Pcow - 12w ago
I've looked at many youtube videos on how to jailbreak my PS3 and I still don't know how to do it.

I have a PS3 Super Slim that was bought this year (2014), and I do NOT have an E3 Flasher and I do not plan on getting one based on the prices. Does anyone have a good guide/download for me please?

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News