Sponsored Links

Sponsored Links

E3 Flasher for PS3 is Coming from Team E3DIY with Dual-Booting


Sponsored Links
174w ago - Similar to the ProgSkeet hardware device for PlayStation 3, today the E3DIY Team have announced that they will be releasing an E3 Flasher for PS3 (produced by Paul Owen and marketed by Gary Wayne Bowser aka GaryOPA) which will feature dual-booting among the options detailed below.

To quote: E3 Flasher, the world first flasher special for PS3, easier backup and downgrade, support dual boot, coming soon!

E3, created miracles on PS3 JailBreak, release free JailBreak, downgrade and goldfinger, and will now release a full new revolutionary E3 Flasher which includes: backup, restore, upgrade, downgrade and dual boot all in one.

PS3 E3 Flasher Features:

  • NOR FLASH ON board.
  • 1 KEY backup or restore, simple is best.
  • Dual boot, choose booting from original bios or E3 bios.
  • 3 save MODE, save bios to E3 nor flash, TF card or PC.
  • NO harm for console, but can longer console life because of specially design.
  • Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory.
  • Compatible all slim and fat console, include latest 3000x version.

Don’t forget E3DIY team, which free service always It said they were studying BIOS, Let’s wait and see what happens. And please note the new E3 domain [Register or Login to view links], more details coming soon!

PS: E3DIY Team note 3.7 downgrade, so maybe E3 Flasher will downgrade automatically, no need modify on PC. Thanks all guy whom contribute PS3 JailBreak.

Follow-up: E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER !

In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operation
is very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !
we not record any image about E3 FLASHER regards it’s not release by far, hope eveyone understand.

The official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console.. with slim console no need solder wire but fat console need.

E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER ! In 5min, E3DIY team success downgrade 3.7 to 3.55 with E3 FLASHER. Time is short and operations very easy, this depend on E3 FLASHER special design, 1key operation and nor flash on board !

we not record any image about E3 FLASHER regards it’s not release by far, hope everyone understand. the official version should release next week, more video and picture will be public at that time.

PS: E3 FLASHER compatible all NAND FLASH and NOR FLASH console .with slim console no need solder wire but fat console need.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew releases!

Comments 719 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles.
 
#179 - racer0018 - 163w ago
racer0018's Avatar
From the first time I installed it, the clip was really loose. I have been reading that there has been alot reports like this. I have been doing some think about maybe traces the softboard and seeing where to wires go on the ps3 and using the soldering gun to put it on. Thanks

I got the clip to work on the ps3. I used a little pick and bent out the pins in the clip and got it work.

OK for the guide.

What is needed is the tools to take the ps3 apart.

A downgrade dongle, this could be the e3 reader, psdowngrade, etc...

  • E3 flasher
  • MicroSD card

First you install the e3 flasher following the guide that is on the e3-tech website. Now I found this out by messing around with the e3 flasher that it will not backup the firmware on 3.56. I had to update to 3.72 to get it work.

After you get the e3 installed, make a backup using it. Install the microSD card into the proper spot on the e3 flasher front part. By having the switches, ps3 mode, ofw, microsd, ps3 flash, lock, in the down postion. Have the backup switch in the up postion. After the ps3 is booted up in the xmb, hit the start button. Wait for all the led lights to light up from 1 to 8. Once that one is done, take out the microSD card and read it in a computer and save the backup in a place safe in case you ever need it. OK now for the back up. All the files that you will need is in this thread.

OK the first step is to download the file e3_downgrade.bin from the website. Copy it into the root of the microSD card. Set the switches for the e3 with all down except unlock. Then bootup the ps3 and wait for it to get into xmb. Once it gets there, press the start key on the e3 board and wait for all the lights to come on 1-2-3-etc... into all 8 are lite. From there restart the ps3.

The system will tell you to plug in the joystick. Do not do nothing else at this time. Just unplug the ps3 and wait for the next step.
Plug in the downgrade doggle that you have ready into the near usb port to the blu-ray player. Press the power button and the eject buton right away to reach the factory mode. The ps3 will turn off after a while.

Next copy the files from the Enter and exit factory service mode file v1.2, there are two steps in this download. You need the one in the first step. There should be a Lv2diag.self and PS3UPDAT.PUP to the root directory of an usb drive with nothing on it. Plug the flash stick into the usb port closest to the blu-ray drive. Turn on the ps3 and this should take about 4 mins to install everything again.

Now put the usb file back into the computer and erase all the files from the usb. Go into the file that you downloaded and put the step 2 files onto the usb drive. From here plug the usb drive into the 2nd port the one closest to the blu-ray drive. Now turn on the ps3 and wait for it to get done. It will turn off by itself. Once it is done pull out the usb drive and turn on the ps3 and then you will have downgraded the ps3 and you are ready to go.

So I went a little more into to see what the e3flasher was made out of. I went ahead and bricked the ps3 to see if the backup that I made would work. I followed the guide that they have posted by soldering the wire that they told me to from the ps3 mainboard to the e3flasher. Set all switches to down put the fun flash one like it said and hit restore. Waited for the porgess to stop. Once it did I went ahead and turned on the ps3 and nothing happened. It is now stuck with a black screen. I still have the dump off the e3 flasher.

SO now I will be looking for a mod with a proskeet that you would be willing to help me finish what I started. I have sold my proskeet for reasons of helping out a friend and money is a little low because of my mother being in the hopsital and being by her for a while. But if there is a mod that would be will help pm me and we can see if the read is any good and if someone could figure this out. Thanks all for reading.

#178 - sindymendler - 163w ago
sindymendler's Avatar
i don't know where they are

#177 - HeyManHRU - 163w ago
HeyManHRU's Avatar
Well thanks for the update racer0018, it was also very hard getting the clip to stay on when I installed it. Hopefully the E3 team will do a better job next time on their flasher.

#176 - racer0018 - 163w ago
racer0018's Avatar
Well my install didn't go very well. I thought i installed it right. However the clip is really loose on mine and it will not do anything. I have tried to place it on there just right about five times and nothing. I have also tried to do with the ps3 taken apart and everything hooked up to it.

I have contacted the place that i got it at and seen if they could help. I also contacted e3 and seen what they can do. I will wait and see what they have to say and post back. Sorry can't make a guide without it working. Thanks

#175 - Robert Vuitton - 163w ago
Robert Vuitton's Avatar
Quote Originally Posted by Serton View Post
Thanks for the quick reply, also opening it means losing my two-years warranty or am I wrong?

Nothing to worry about mate, there's a anti voiding removal method made by gilksy in youtube.

It shows you how to remove the warranty label, so that it can be reused without "Sony knowing you've been inside the console". You should try it out. I did this method two years ago before opening my PS3 console after it stopped reading my games lol.

 

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News