199w ago - Hi guys, I used an Atmega8 running at 16Mhz (I had a couple lying about from the BT Vision project I was working on) and knocked up a small prog to do the same as the other chips and dump out the PS3 Hypervisor and Bootloader.
I was quite surprised, It actually worked fairly straight away! I only had one pulse going everytime I pressed the button at first but not a lot was happening.
So I did what xorloser did, and modded it so it pulsed every 100ms while the switch is pressed.
After about 30-40 seconds... I got a hit with the exploit code posted here. Then I used the dumper (posted here) to dump the 10mb bin.
Just having a look through the dump, lots of strings in there.. I haven't dropped it into IDA yet tho...
This is the source and hex (for those who dont want to compile it) for the Atmega8 which I glitched my PS3 with. The Chip I used was the Atmega8-16pu. You will also need a 16mhz Crystal, and 2 x 22pf Capacitors.
Grounding pin 14 on the chip will produce a pulse on Pins 2 of the chip (infact it does all of PORTD) This should then go to the memory bus point on the ps3. See Circuit diagram (below).
I used ponyprog to program my chip, with CKOPT ticked in the fuse settings, everything else was unticked.
Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!