117w ago - This PS3 project might help someone out there to use their Teensy development boards for at least something, I call it my GT5: Grind A-Spec babysitter.
I got the idea from a mate of mine who used a keypad with paper wedged in to keep the enter key depressed and a controller with rubber bands and presstic. I don't own a usb keuboard or keypad, so I asked some questions and did some reading and this is the result.
Keep in mind I know nothing about programming and I can not help with other development boards.. although the code is very simple, I had to ask for advice.
Thanks to
Paul at PJRC for doing the code for me.
1. Download and install Arudino Software
2. Download and install Teensy Loader
3. Download and install Teensyduino installer
4. Run the Teensyduino installer (You must select the location where you extracted the Arduino Software)
5. Run the Arudino software and the Teensy loader
6. Plug in the Teensy development board into a USB slot
7. Copy the following code into the Arduino software
// menu: Tools > Board must be set up one of the Teensy boards
// menu: Tools > USB Type must be set to Keyboard
// setup runs once
void setup() {
Serial.begin(9600);
delay(2500);
}
// loop runs over and over, as long as power is on
void loop() {
Keyboard.println();
delay(200);
}
8. Click "verify".
9. Then push the button on your Teensy (of course, it needs to be plugged in), and it'll get programmed with this code.
This tells the Teensy to "pres ENTER" all the time
10. Remove the Teensy
11. Switch on the PS3 and load GT5.
12. Go to Extreme A-Spec races
13. Select the Indy track in "Like the Wind"
14. Make sure you use the Red Bull X1 (Switch all assists to on, traction control 5, ABS 1, reduce downforce to minimum and change oil)
15. Make sure "accelerate" is set to up on the right analog stick
16. Take a rubber band and put it around the right analog stick to the front of the controller and around - secure it around the right handle - this will make the car accelerate all the time
17. Enter the race.
18. Now do the same with the left analog stick. You will see in the race that the car will go straight all the time - adjust the steering ever so slightly to the right so the car does not go left when it is released from the walls (just do it - you will see what I mean - it might take a few races to fine tune this). The controller must be plugged into the USB, else the battery might go flat and the grinding comes to a halt.
19. Plug in the Teensy into the PS3.
When the race is finished, the Teensy will do all the keystrokes for the race to be repeated.
No.
Are you sad?...
...
To help you (and perhaps others) out these are settings to check and/or play around with to get the Teensy to work. This replaces step 8 above:
8.1 In Arduino click Tools - Board: Select the correct board
8.2 In Arduino click Tools - USB Type: Select Keyboard + Mouse
8.3 In Arduino click Tools - Keyboard Layout: Select the correct keyboard for your region (I used US English)
8.4 Click "verify"
Hope this helps.
At Christiann Yup, I wish I had thought of this when I grinded for B-spec to do the SLS Challenge to win the SLS. But I could only manage level 36 by doing endurance races (best XP gain) and the cash was not important to me at the time.
Although your idea is very sound, grinding for cash is the same or even quicker this way than with similar B-spec events and with the added bonus that your A-spec XP increases and not ol' Bob's XP. I am grinding about 1mil Cr per hour. So in 24hrs I grind for 20 hrs to get about 20mil Cr (this is max currently) and then spend a couple of hours to spend the cash on cars.
Tis a bit tedious, but it gets the job done. Also, with B-spec, you have to press the down button or left analog stick down to exit the Bob's page after a race. I have not tested this at all so I don't know how the constant input from the Teensy will influence the way Bob races in the game. I think default setting is to reduce pace and I surely don't want him to "fall asleep".
Think about it: Let your b-spec driver constantly race him a track over and over again, while you are sleeping, at work or school.
In this way you will get a lot of money too, and you also don't need something to keep the right analog stick up.
Worked first time for me. Play around - if you don't come right, I will check for you tomorrow. Let me know.