Sponsored Links

Sponsored Links

Video: PS3 4.31 OFW to 4.30 Rogero v2.03 CFW with Flasher Guide


Sponsored Links
86w ago - Nearly two months after the previous update, today I have posted a guide and video on how to downgrade a PS3 4.31 OFW console (including CECH-300x slims) to 4.30 Rogero v2.03 CFW using a PS3 Hardware Flasher with no 3.55 needed.

Very easy tutorial. Follow the steps to downgrade a PS3, but when you get to the first step of the USB downgrading part after putting your PS3 into service mode, use Rogero 4.30 CFW v2.03 on the root of the USB with the lv2diag.self to downgrade instead of the 3.55.

So again, no 3.55 ever touches the PS3 during this whole setup! Doing this will also now allow CECH-300x models original slims to be downgraded to 4.30 CFW as long as it never touches 3.55

The whole reason for this was to find out if the E3 fits a CECH-400xx model super slim models, but all I needed was proof that you can downgrade from 4.31 to 4.30 CFW with a flasher.

So if any one out there has an E3 and a new super slim model please test this if it works! You can make back ups of the NOR incase it fails.

Here is proof you can but I still do not know if the CECH-400xx models are compatible since I do not have one.

Files needed for safety and to proceed:


PS3 USB links after NOR editing:


E3 back-up checks links:


Steps:

  • Step 1 - switch pup's with Rogero's 4.30 CFW v2.03 - my link has it set ready
  • Step 2 - lv2diag out of factory mode
  • PS3 nor dump patcher to fix bad back-ups
  • downgrade.bin - makes it rewrite the nor to allow factory mode access
  • update.bin - its the Samsung version of the flasher firmware, allows multi-console downgrades.. more than one console in other words
  • PS3 Flowrebuilder - decrypts the backups to look and make sure its good

Here is proof of me downgrading to 4.30 CFW no 3.55! My video is not cut but speeds up through the middle since it takes almost 2 hours to prove this. You see every time I drop the camera, fix the E3 and finish the downgrade straight to 4.30 CFW Rogero v2.03 which you will know it's spoofed to 4.31, you can see the install PKG / lastGAME icon after downgrading.








Hint: The E3 always has the ribbon starting under the NOR words (pictured below).

Always test your back ups and even use Flowrebuilder 4.2.2 to reverse decrypt to make sure your back up was good.








Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 139 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

Nnoitra's Avatar
#134 - Nnoitra - 65w ago
i have one doubt my ps3 have the OFW 4.41 instaled and have the 3.56 OFW from factory to instal this CFW i have to make the downgrade from 4.41 to 3.56?

Ansharus's Avatar
#133 - Ansharus - 75w ago
I have got a flasher, and I'm currently on OFW 4.30 on a 3.56 min. version cech-25xx. I know it's possible to flash to Rogero 4.30, but is there some way to use the half dual boot option of it on a PS3 with a 3.56 FW base?

If not, could someone please advise me on any other means to switch back and forth between CFW and OFW, or any other ways to still use the PSN?

sautzer's Avatar
#132 - sautzer - 77w ago
I followed the tutorial to Install Rebug PS3 CFW 4.21.1 but I can't entry in recovery mode, the second time that I press the power button the PS3 turn off again without do the beeps. How can I resolve?

ercan usta's Avatar
#131 - ercan usta - 79w ago
hello, factory firmware 3.60 downgraded help? date code 1B

CAMILO3410's Avatar
#130 - CAMILO3410 - 81w ago
I have a model (CECH-4001B) and does not fit that model

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News