Sponsored Links

Sponsored Links

Toggle QA PS3 PKG for Rebug Custom Firmware is Released


Sponsored Links
137w ago - Following up on their previous updates, this weekend Sony PlayStation 3 hackers Cyberskunk and evilsperm have released a Toggle QA PS3 PKG for Rebug Custom Firmware users.

Download: [Register or Login to view links]

To quote: THIS SOFTWARE WRITES TO THE PS3 EEPROM - USE AT YOUR OWN RISK

After having to QA a few PS3 in a row. Then installing a different firmware straight after, it was time to cut out the middleman.

Toggle QA will SET/RESET the QA Flag and Token on any 3.41 or 3.55 firmware that has lv1 mmap and lv2 peek and poke patches (which is most of them).

When you run the app it first detects if the PS3 is 3.41 or 3.55. Next it will check if your firmware has any of the required lv1 patches already and only patch the hypervisor with the ones you need. After it finishes patching Toggle QA will check the status of the QA Flag and SET/RESET it accordingly. Then once the QA SET/RESET is done any lv1 patches made will be removed.

HOW TO USE:

1: Install toggle_qa.pkg
2: Run Toggle QA from XMB
3: PS3 will beep and return to XMB. (If you do not hear a beep it has not worked)

NOTE: Every now and then it will hang on the lv1 patching stage. If it has not beeped and returned to the XMB after about 30secs you will need to reboot and try again.

Enjoy.

~ Codename: REBUG

Credit and Thanks:
Big thanks to graf and glevand for the hypervisor work.
Everyone involved in getting the QA Flag/Token working back many moons ago.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 364 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

jykelly's Avatar
#334 - jykelly - 93w ago
Just tried this. Couldn't log in. Anybody gotten this to work?

PS3 News's Avatar
#333 - PS3 News - 93w ago
Today PlayStation 3 homebrew developer Nightbird has released a Rebug 3.55.2 PSN Enabler and 4.25 Spoof v0.7r3 update package (PKG) for those using the Rebug PS3 Custom Firmware (CFW).

Download: [Register or Login to view links]

To quote: Here is a patched Rebug 0.7 Update Package to enable PSN and v4.25 spoofing on Rebug 3.55.2 Firmware. You must already be using Rebug FW 3.55.2 to use this. If you have already installed Rebug's Official Update 0.7 before, you can still install this. This package relies on you using Rebug's own CEX / DEX Selector to change between 3.55 and 4.25 (PSN access).

Info:

I have used all original Rebug files and patched them manually. The 'version.txt' was pulled from the original 4.25 pup. Selfs and 'index.dat' were rebuilt using fail0verflow tools. 'vsh.self.swp' and 'vsh.self.cexsp' are correctly patched to enable PSN access, 4.25 spoofing and switching between Debug and Retail XMB modes without causing RSOD. There are basically 3 modes:

  • Mode: Normal XMB: Debug = no spoofing (3.55), no PSN access, has 'Debug' options in 'Settings'.
  • Mode: Rebug XMB: Debug = Spoofed (4.25), PSN enabled, has 'Debug' options in 'Settings'.
  • Mode: Rebug XMB: Retail = Spoofed (4.25), PSN enabled, no 'Debug' options in 'Settings'.

All above modes are tested working with Reactpsn.

Credits:

Thanks to Itskamel for his perseverance in sussing out how the fw version should be written in the self. The anonymous source who released the current PSN pass-phrase. Fail0verflow for their tools. Rebug.

Installation Instructions:

Before you install this package, make sure you are in 'normal' mode (3.55) and are not using any other spoofers. If you are, disable and uninstall them. If you have been using FckPSN, put your original 'CA27.cer' back. If you are already spoofed (rebug mode) using Rebug's CEX/DEX selector, use it again to change back to 3.55. Do this by pressing 'L1 + Cross(X)' within the selector. Status should say 'Normal Mode'. Exit selector and check system FW is 3.55.

Now install the 'Rebug_PSN_UPDATE_0.7r3_3.55.2.pkg' from the link below. If you get the message 'same version already installed, continue' select 'YES'.

Now run 'Rebug Unofficial PSN Update Package 0.7r3 (3.55.2)' from XMB (ignore the stuff about v4.11). Select 'YES'. You will get a message 'Update Complete - System Will Reboot'.

After reboot, go back into Rebug's CEX/DEX selector. Press 'L1 + Circle(O)' to activate Rebug mode. Press 'PS' button and exit the selector. System will reboot. Now check in system settings/info that your firmware version says 'version 4.25'.

If it does, you have done the above procedure correctly and you can now log in to PSN. You can also now uninstall 'Rebug Unofficial PSN Update Package 0.7r3 (3.55.2)' from XMB.

Note: If you haven't installed Rebug's CEX/DEX selector, you can find it in 'Install Package Files'/'PS3 Hard Disk'. Both versions 1.5.1 and 1.6.1 work fine. This is for Rebug 3.55.2 Firmware only.

More PlayStation 3 News...

fantopoulos's Avatar
#332 - fantopoulos - 93w ago
No it is a 3.55.v2 rebug their is higher version like 4.11 dex and 4.21 dex but if you are not technically sound i would not recommend it,you can do a lot more but need some extended knowledge to do the other things, and always a possibility of bricking system so read tutorials and then decide, i chose not to i had it but had glitches so i went back to 3.55 cheers read and decide

ramiro1398's Avatar
#331 - ramiro1398 - 93w ago
Does this cfw work with games 3.60+?

PACCIONE's Avatar
#330 - PACCIONE - 94w ago
How do you uninstall this cos it won't upload mw2 updates or WatW wtf !!! bro errors when i install game update grhhhh!! help !!!

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News