Sponsored Links

Sponsored Links

ReActPSN v2.22 for PS3 with CEX2DEX and DEX2CEX Support Out


Sponsored Links
112w ago - Following up on the ReActPSN v2.20 and ReActPSN PS3 RAP2RIF .RAP to .RIF File Converter updates, today Chinese PlayStation 3 homebrew developer eid0dex1 has made available ReActPSN v2.22 followed by v2.23 which includes CEX2DEX and DEX2CEX support among the changes outlined below.

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links]

To quote, roughly translated: The method is very simple to use, only to start the conversion from CEX! Recommendation: before the conversion must use memdump backup FLASH.

CEX2DEX: The suggested retail machine CEX brush 3.55K (measured rebug3.55 also can), press the arrow keys to run reActPSN v2.23 Right about 8 seconds C2D conversion was successful buzzer three times and automatically restart, upgrade DEX firmware can .

DEX2CEX: DEX brush into itskamel 3.55 version run reActPSN v2.23 and press the arrow keys right about 8 seconds, the buzzer D2C conversion was successful and automatically restart, upgrade the CEX 3.55K firmware can.

Warning: C2D not use machines convert reActPSN v2.23, prohibited the use of this method DEX2CEX conversion C2D when not set the QA on not convert. The only set QA is not set QA extra will beep10 sound bricked ready to downgrade dogs.

Measured 3.55k NOR machine, not networking does not insert U disk, do not upgrade DEX, only to convert more than 40 times, all successfully. DEX2CEX also tried 5,6 times, without any problems. If the conversion process crash the swappable power retry can no crash report of brick, the machine QA extra flag is not set the brick are CEX2DEX when.

Update:

  • QA extra flag, this version CEX2DEX forces set does not require users to set long as I remember not to touch the DEX environment QA on the line.
  • Read and write FLASH from LV1 call the complex to the simple LV2 call conversion a little more stable, a little bit better compatibility, also may support NAND.
  • This version is only recommended used in C2D2C2D, and do not recommend starting from DEX, machine QA extra flag is not set in the past C2D the, DEX2CEX will, like brick, or other methods.
  • The increased voice prompts CEX2DEX conversion was successful when the buzzer rang three times and restart DEX2CEX conversion was successful buzzer and restart.
  • Icon on the right text upgrade prompt (the next version will open automatically, this version also need to manually in DEX debug open This dumping core business on machine conversion success forced to restart in order to display the correct prompt)

This version has increased the support of DEX authorized, running under will vsh.self patch lay the key, after about 30 seconds and restart the arrow keys to remember patching L1 reload authorized CEXDEX Huzhuan. This version also forced on debugSystemUpdate and automatically create a 16 / dev_hdd0/updater/0X directory conversion once CEX2DEX, CEX under the various versions of the system upgrade file. Copied the / dev_hdd0/updater/0X directory, each directory copy a change is easy to remember the name, so that the system upgrade from a hard disk installation. CEXDEX conversion or to read the files on U disk.

Error Reporting:

Been 300,400,600 wrong version 2.23 dump what 16MFLASH, to rely on CD-ROM insert U disk, running 2.23 and press the arrow keys on the key, three minutes after the U disk there FLASH dump data. Memdump data in conjunction upload, download, together with the PM machine model to me. Need for a NAND the above dump the data, and who has the time, please upload a.

ReActPSN v2.23 Changes:

  • Add set QA extra flag when do CEX2DEX.
  • v2.23 Only support C2D2C2D.. Not support D2C2D2C.. it will brick your console if you never set QA extra flag before!
  • Beep3+reboot CEX2DEX ok, Beep2+reboot DEX2CEX ok.
  • Add patch vsh.self to support reActPSN2.0 rap model for all 3.41&3.55MFW.
  • Run reActPSNv2.23 and keep pressed BUTTON_DOWN about 8s, after 30s then auto reboot.

ReActPSN v2.22 Changes:

  • Add new type NP KEY to Triangle fix mode: 0x4,0x6,0xA,0xD,0x10(3.60)
  • ReActPSN v2.22 CEX2DEX DEX2CEX (untested 256M NAND FLASH)
  • You need to be on 3.55 with peek and poke patches to switch between CEX and DEX.
  • Run reActPSN v2.22 and keep pressed BUTTON_RIGHT about 8s, auto reboot.
  • Then you must Do system update to DEX3.55 or CEX3.55!
  • Dump and Backup PS3 FLASH first.
  • Test it on 3.55K and Itskamel's 3.55 DEX more than 50 times, all is ok.

ReActPSN v2.22 Features:

  • The triangle button to crack the mode new 0x4, 0x7, 0xA, 0xD 0x10 the NP KEY support previous versions only support 0x1 type of the NP KEY.
  • Retail machine reActPSN v2.22 and development of machines, a key conversion
  • Before using this feature, please backup your FLASH!
  • All work on the 3.55CFW and peek & poke DEX3.55 firmware.
  • Run reActPSN and continued to press the right arrow key about 8 seconds, the machine automatically restart after a successful conversion.
  • Retail machine can be converted to a development machine, development machine can also be converted into a retail machine.
  • Please upgrade to DEX3.55 or 3.55CFW.
  • 256M NAND FLASH models untested 16M models to test the more than 50 times occasionally crash, but no brick.
  • Please have the FLASHER tools first try, there are a lot of success without brick report the average user to use this feature.

Answer the following issues of concern with ReActPSN v2.22 in the DEX.

  • 2.0 features have the VSH patch.
  • Functions theoretically available 2.1 crack OFW. Of DEX some folder write permissions is too low, there is no impact not tested.
  • 2.2 features can be used in 3.55 (peek and poke).

256M NAND FLASH models untested 16M models to test the more than 50 times occasionally crash, but no brick.

This will only switch your console back and forth between CEX and DEX firmwares after you have dumped NOR/NAND, EID0 and converted your console to a DEX unit.

(You have to decrypt your EID0 dump to obtain per console key, then use the NOR dump to create a proper DEX flash and flash NOR to create a DEX unit, then you can install DEX firmware.)

This tool makes switches between CEX/DEX firmwares faster I guess, but it won't convert your console to DEX. I should have been more clear about that.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 228 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

PS3 News's Avatar
#193 - PS3 News - 48w ago
Following up on the previous revision, ReActPSN has now been updated to version 2.28 by PlayStation 3 developer reactpsn with the changes outlined below, as follows:

Download: [Register or Login to view links] / [Register or Login to view links] / [Register or Login to view links] (PSNStuff v1.83 / v1.90) / PSNStuff Archive

To quote: ReActPSN v2.28

  • Added makepkg

ReActPSN Quick Start Guide:

Basic function: Create aa user and run reActPSN to generate PSN license from USB/exdata.
Button basic: [X] pressing and holding X button for 8 seconds when launching reActPSN.
[L1] Reinstall RAPs&EDATs from USB0/exdata or USB1/exdata fold.
[L2] Backup RAPs&EDATs to USB/reActPSN/pubPSN/rapxxxedatxxx.zip.
[R1] Backup reg&rif&edat to USB/reActPSN/BKxxxx.zip.
[R2] Backup full fixed NPD files to /USB/reActPSN/FixedPSN.
[O] Fix PSone/PSPminis/THEME & generate C00 activation edat license.
[X] Batch installs PS2 ISO from USBorHDD/PS2ISO. Flawlessly same as PSN pkg install.
[/\] Fix PSN retail to free.stag1:fix all eboot and start hook,play,stag2:fix sprx edat etc.
[SQUARE] Same as [/\], it try to search all files and run slowly.
[/\+R2] Fix PSN and make all NPD FIX pkg to USB/. Same as PSN crack patch.
[R2+L2] Make only 'Fixedby reActPSN' NPD FIX pkg to USB/ or HDD0/packages.
[R2+L1] Make all files FIX pkg to USB/ or HDD0/packages. make sure have enough freespace.
[R1+L2] Make retail NPDRM files pkg to USB/ or HDD0/packages.
[R1+L1] Make retail all files pkg to USB/ or HDD0/packages. make sure have enough freespace.
[RIGHT] 8 seconds CEX2DEX&DEX2CEX.
[DOWN] Patch VSH to run reActPSN.
[LEFT] Disable/Enable all users rif license(remove/restore act.dat).

How to use:

Flawlessly to play all PSN contents.
(1) Download psnstuff v1.82,download psn contents and store RAP&edat files.
(2) Put exdata folder with rap's on usb, create 'aa' user and run reActPSN.
(3) Install PSN and playing...
(4) Put exdata folder with new raps on usb, holding L1 button for 8s and run reActPSN.
Install new PSN and play new PSN games.
Play C00 type PSN games without rap&edat. [O] to activate it to full game.
Share your RAPs to others same as psnstuff, [L1] will help you.
Share your PSN crack patch to others.
(1) Downloads PSN(1942 flower rain DLC) from PSN store.(or install&play it with psnstuff)
(2) Insert USB disk to usb0 or usb1.
(3) Run reActPSN and holding /\ triangle button for 8 seconds.
(4) Play 1942,flower,rain,BD or PSN dlc.
(5) Run reActPSN and holding triangle+R2 button for 8 seconds, then check your USB disk.
(*) Do not insert any usb disk,[R2+R1] can gen >4G pkg on hdd0/packages.
Flawlessly to install PS2 ISO. (Require CFW>4.20 and has been installed any RAP)
(1) Copy few or many PS2 ISO files to USB/PS2ISO and run reActPSN with hold X.
(2) Install bubble pkg on XMB.
(*) About >4G PS2 ISO. Must copy it to dev_hdd0/PS2ISO, dont insert usb, then [X]...
PS2 ICON will be display if your have installed a full version MM.
RISK FUNCTION!!! DO NOT TRY DOING IT IF YOU COULD NOT FIX A BRICKER.
(1) SET QA, 3.55CFW, [RIGHT] [RIGHT].
(2) 8s CEX2DEX DEX2CEX, REX4.21 or REX4.46 on slim, [RIGHT], its safe.
(3) FIX VSH, should works on every CFW (except ro4.40 v1.0?, I forgot).

PSNStuff v1.83 Changelog:

  • compressed db (saves space and bandwidth)

It's a mandatory update because the old server is offline.

PSNStuff v1.90 Changelog:

  • new tab "metacritic"
  • new tab "Chat"
  • Button timeout - if you click "save rap" or "copy psn link" you have to wait 5sec. till you can click again

Regarding metacritic: back = backspace, reload = F5. To load the html5 version of the chat make a new registry entry:

32bit system:

[Register or Login to view code]

64bit system:

[Register or Login to view code]

Or use one of these: [Register or Login to view links] (change extension to *.rar )

Finally, from element comes a PSN Stuff Linux Command Line utility with details below:

Download: [Register or Login to view links]

Hey, I wrote a little application which can read the current db from psnstuff. Hopefully it is useful:

[Register or Login to view code]

Now in db you have the plain text.

More PlayStation 3 News...

bearmon2010's Avatar
#192 - bearmon2010 - 57w ago
Thanks. By the way, rghost link deleted the file so I have to go to mirror link instead. I just want you to know. Cheers!

PS3 News's Avatar
#191 - PS3 News - 57w ago
Following up on the previous revision, ReActPSN has now been updated to version 2.27 by Chinese PlayStation 3 developer ccregame which now includes a few minor PS3 / PSN bug fixes as outlined below.

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links]

To quote, roughly translated: No big changes, the average user Needless to upgrade.

Alter some minor changes:

1. triangle break mode support to CFW4.46, dex4.46 not support, has little significance.
2. fixes L2 backup rap small bug.

More PlayStation 3 News...

cadaveros's Avatar
#190 - cadaveros - 73w ago
i can use function [left arrow] to fix the problem 'trophy can not be registered' with other games in MultiMan?

PS3 News's Avatar
#189 - PS3 News - 73w ago
Following up on the previous revision, ReActPSN has now been updated to version 2.26 by Chinese PlayStation 3 developer ccregame which supports PS3 4.41 CFW similar to the recent multiMAN and mmTOOLS updates.

Download: [Register or Login to view links]

To quote, roughly translated: CFW4.41 out, I also do support the 4.41 version for half an hour, were using a version of the the VSH patch function test, can automatically detect patched Key not changed, do not to study appldr, also did not see LV1 should be no change.

ReActPSN v2.26 Changes:

1: triangular crack mode support to CFW4.41.
2: [the triangle key + L1], [Triangle button + L2] downgrade will automatically generate a small SFO downgrade pkg triangle button can be installed
Installation the PKG location in the XMB-game, REBUG the game-Package Manager-PlayStationNetwork Content.
3: Add [left] mode, forced to delete the current user's trophy file to solve the problem of the part of the game after the break trophy can not be registered.
4: rewrite [X] PS2 ISO import mode, with PSN installation perfect container is no longer needed, and install three times faster.

How to Use:

PSN crack method, as an example, using the following four typical PSN Games tested in 4.41CFW

1. Installation 1942 (1eboot), flower (1eboot, +14 SPRX +1 edat), ht2e (1eboot of +1 edat), Tetris (C00).
2. Containing any of the first three games authorized U disk into thin machine a USB interface, rap file the U disk exdata directory,
New User aa or [L1] mode import authorization, do not import authorization can also be part of the game but will increase the difficulty of crack.
3. run reActPSN, hold down the triangle button + L1] about six seconds, the progress bar will be displayed to crack all game EBOOT.BIN.
4. After the completion of the XMB there a rPKG_NPJB00201.pkg, is necessary to install it in a low version of the CFW
Unfortunately, the test ht2e not run in 3.55, then it deleted. Run flower, after entering the game screen exit run ht2e, prompt exit trophy registration failed.
5. Run reActPSN, hold down the triangle button + L1] about six seconds after the completion of crack two games, crack 14self 2edat.
6. This time all three of crack, but can only run the first two games, ht2e prompt trophy registration failed, the fourth game still is a demo.
7. Run reActPSN, hold down [left arrow] about six seconds, the system automatically restart. Or failure running ht2e, then run ht2e success.
8. Run reActPSN, hold down the [O] about six seconds, run Tetris, full version, all four games crack is completed.

PS2 ISO Import System Requirements:

4.20 CFW can reActPSN authorized to play PS2 classic game, but do not need to import any PS2 container authorized.

Main Functions:

1. X-mode bulk import PS2 ISO, one can import up to 100 ISO file name support for multiple languages.
2. Multiman full version installed, it will automatically reference the cover of the PS2, icon generated PSN.
3. With PSN installation perfect, each game has a fixed ID, not influence each other, and install the game will not repeat the installation.

How to Use:

1. A few PS2 ISO file is copied to the U disk / PS2ISO directory, can Kaoru hundreds PS2 ISO.
2. PS3 insert the U disk run reActPSN v2.26 and hold the X button for about 6 seconds (X mode), wait to return to the XMB complete the import. Files larger than 4G copied into / dev_hdd0/PS2ISO directory, do not insert U disk, run reActPSN v2.26 and hold the X button to import.
3. The import is complete, it will generate a very small install pkg, press the triangle button to install it, Installation the PKG location in the XMB-game, Rebug the game-Package Manager-PlayStationNetwork Content. Installation is complete, enjoy PS2 games.

PS2 ISO Import Function to Explain:

1. PS2 games still need authorization - Your machine must with ReActPSN import other authority, and can play X conversion will automatically generate a PS2 authorization to the inside of your machine.
2. Other conversion methods can not play the game, the same can not play.

More PlayStation 3 News...

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News