Sponsored Links

Sponsored Links

ReActPSN v2.22 for PS3 with CEX2DEX and DEX2CEX Support Out


Sponsored Links
107w ago - Following up on the ReActPSN v2.20 and ReActPSN PS3 RAP2RIF .RAP to .RIF File Converter updates, today Chinese PlayStation 3 homebrew developer eid0dex1 has made available ReActPSN v2.22 followed by v2.23 which includes CEX2DEX and DEX2CEX support among the changes outlined below.

Download: [Register or Login to view links] / [Register or Login to view links] (Mirror) / [Register or Login to view links]

To quote, roughly translated: The method is very simple to use, only to start the conversion from CEX! Recommendation: before the conversion must use memdump backup FLASH.

CEX2DEX: The suggested retail machine CEX brush 3.55K (measured rebug3.55 also can), press the arrow keys to run reActPSN v2.23 Right about 8 seconds C2D conversion was successful buzzer three times and automatically restart, upgrade DEX firmware can .

DEX2CEX: DEX brush into itskamel 3.55 version run reActPSN v2.23 and press the arrow keys right about 8 seconds, the buzzer D2C conversion was successful and automatically restart, upgrade the CEX 3.55K firmware can.

Warning: C2D not use machines convert reActPSN v2.23, prohibited the use of this method DEX2CEX conversion C2D when not set the QA on not convert. The only set QA is not set QA extra will beep10 sound bricked ready to downgrade dogs.

Measured 3.55k NOR machine, not networking does not insert U disk, do not upgrade DEX, only to convert more than 40 times, all successfully. DEX2CEX also tried 5,6 times, without any problems. If the conversion process crash the swappable power retry can no crash report of brick, the machine QA extra flag is not set the brick are CEX2DEX when.

Update:

  • QA extra flag, this version CEX2DEX forces set does not require users to set long as I remember not to touch the DEX environment QA on the line.
  • Read and write FLASH from LV1 call the complex to the simple LV2 call conversion a little more stable, a little bit better compatibility, also may support NAND.
  • This version is only recommended used in C2D2C2D, and do not recommend starting from DEX, machine QA extra flag is not set in the past C2D the, DEX2CEX will, like brick, or other methods.
  • The increased voice prompts CEX2DEX conversion was successful when the buzzer rang three times and restart DEX2CEX conversion was successful buzzer and restart.
  • Icon on the right text upgrade prompt (the next version will open automatically, this version also need to manually in DEX debug open This dumping core business on machine conversion success forced to restart in order to display the correct prompt)

This version has increased the support of DEX authorized, running under will vsh.self patch lay the key, after about 30 seconds and restart the arrow keys to remember patching L1 reload authorized CEXDEX Huzhuan. This version also forced on debugSystemUpdate and automatically create a 16 / dev_hdd0/updater/0X directory conversion once CEX2DEX, CEX under the various versions of the system upgrade file. Copied the / dev_hdd0/updater/0X directory, each directory copy a change is easy to remember the name, so that the system upgrade from a hard disk installation. CEXDEX conversion or to read the files on U disk.

Error Reporting:

Been 300,400,600 wrong version 2.23 dump what 16MFLASH, to rely on CD-ROM insert U disk, running 2.23 and press the arrow keys on the key, three minutes after the U disk there FLASH dump data. Memdump data in conjunction upload, download, together with the PM machine model to me. Need for a NAND the above dump the data, and who has the time, please upload a.

ReActPSN v2.23 Changes:

  • Add set QA extra flag when do CEX2DEX.
  • v2.23 Only support C2D2C2D.. Not support D2C2D2C.. it will brick your console if you never set QA extra flag before!
  • Beep3+reboot CEX2DEX ok, Beep2+reboot DEX2CEX ok.
  • Add patch vsh.self to support reActPSN2.0 rap model for all 3.41&3.55MFW.
  • Run reActPSNv2.23 and keep pressed BUTTON_DOWN about 8s, after 30s then auto reboot.

ReActPSN v2.22 Changes:

  • Add new type NP KEY to Triangle fix mode: 0x4,0x6,0xA,0xD,0x10(3.60)
  • ReActPSN v2.22 CEX2DEX DEX2CEX (untested 256M NAND FLASH)
  • You need to be on 3.55 with peek and poke patches to switch between CEX and DEX.
  • Run reActPSN v2.22 and keep pressed BUTTON_RIGHT about 8s, auto reboot.
  • Then you must Do system update to DEX3.55 or CEX3.55!
  • Dump and Backup PS3 FLASH first.
  • Test it on 3.55K and Itskamel's 3.55 DEX more than 50 times, all is ok.

ReActPSN v2.22 Features:

  • The triangle button to crack the mode new 0x4, 0x7, 0xA, 0xD 0x10 the NP KEY support previous versions only support 0x1 type of the NP KEY.
  • Retail machine reActPSN v2.22 and development of machines, a key conversion
  • Before using this feature, please backup your FLASH!
  • All work on the 3.55CFW and peek & poke DEX3.55 firmware.
  • Run reActPSN and continued to press the right arrow key about 8 seconds, the machine automatically restart after a successful conversion.
  • Retail machine can be converted to a development machine, development machine can also be converted into a retail machine.
  • Please upgrade to DEX3.55 or 3.55CFW.
  • 256M NAND FLASH models untested 16M models to test the more than 50 times occasionally crash, but no brick.
  • Please have the FLASHER tools first try, there are a lot of success without brick report the average user to use this feature.

Answer the following issues of concern with ReActPSN v2.22 in the DEX.

  • 2.0 features have the VSH patch.
  • Functions theoretically available 2.1 crack OFW. Of DEX some folder write permissions is too low, there is no impact not tested.
  • 2.2 features can be used in 3.55 (peek and poke).

256M NAND FLASH models untested 16M models to test the more than 50 times occasionally crash, but no brick.

This will only switch your console back and forth between CEX and DEX firmwares after you have dumped NOR/NAND, EID0 and converted your console to a DEX unit.

(You have to decrypt your EID0 dump to obtain per console key, then use the NOR dump to create a proper DEX flash and flash NOR to create a DEX unit, then you can install DEX firmware.)

This tool makes switches between CEX/DEX firmwares faster I guess, but it won't convert your console to DEX. I should have been more clear about that.




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 228 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

Tidusnake666's Avatar
#73 - Tidusnake666 - 138w ago
this looks like the old 2.00 tutorial. Anyone tried without vsh patching and aa user?

Tek9's Avatar
#72 - Tek9 - 138w ago
Ok well i got it to work finally. first things first (this is how i did it so i i am going to try and explain how i managed to get it done i dont take any responsibilities if you mess your ps3 up that being said here's how i did it)

1.) downloaded vsh.self patched version for ReActPSN v2.0
2.) put the vsh.self file for my current firmware in my usb flash drive
3.) Launched Multiman
4.) In Multiman i went to settings and found the 2nd to last option on the list is Write Access to /dev_flash and i enabled it
5.) In multiman went back to the left column to File Manager and hit X on the controller
6.) I Plugged in my USB flash drive into the far right USB port on the ps3
7.) Waited on Multiman to rescan for usb drive then wento to dev_usb000 and hit X on the controller
8.) on right column in multiman i went into dev/blind/vsh/module and located vsh.self and hit circle on the controller and renamed it to vsh.self.bak
9.) On left column in multiman inside dev_usb000 locate vsh.self patched one for your CFW and copy it from dev_usb000 to /dev/blind/vsh/module
10.) Get out of File Manager mode by going back to Games then go back to Settings in multiman and Disable Write Acess
11.) Exit Multiman
12.) Should be back in PS3 XMB now from there install ReActPSN 2.10 from Install Package Files (forgot to mention to have that on the root of your USB flash drive as well prior to plugging it in sorry doing the best i can )
13.) Now Run ReActPSN 2.10 and hold R1 and now it should write to your USB Flash Drive and make a new Folder called reActPSN inside there locate the PubPSN folder and inside it locate rap3edat4.zip and extract it and inside it should be a folder called exdata drag that out and put it into the root of the USB Flash Drive and for any game just put the .rap files in the exdata folder that's already in your USB Flash Drive
14.) Make a New User Called aa Now Log into aa then log back out and log into the original user that you use, now go to ReActPSN 2.1 on the XMB and hit X on the controller and dont touch anything it should now reboot and your aa user should now be renamed to reActPSN v2.0 4rif 4edat now just log into the original username and launch a game you installed via pkg installer and it should be all good.
15.) have to rename reActPSN user to aa everytime you wanna play something new make sure you put the exdata files and .rap files in the exdata inside the USB flash drive

Hope this helps

danton90's Avatar
#71 - danton90 - 138w ago
This still doesn't work with Rock Band DLC, if anyone has ever gotten this to work with Rock Band DLC, could you please message me and let me know.

Natepig's Avatar
#70 - Natepig - 138w ago
I'm on kmeaw 3.55 which has never been on psn. I've never been able to get reactpsn to work, and when i tried this one, it messed up all my other duplex psn games. After a format and reflash of 3.55 kmeaw this does not work at all

Xyth's Avatar
#69 - Xyth - 138w ago
Yea it will be good. I tried nfs dlc and didn't work for me either. It didn't even rename itself reActpsn xx.edat xx.rif

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News