29w ago - Following up on his
previous release, today PlayStation 3 homebrew developer
Nightbird has released a PSN Spoof v4.31 Enabler and Disabler for PS3 Kmeaw Custom Firmware (CFW) users.
Download:
PSN Spoof Enabler v4.31 for Kmeaw CFW /
PSN Spoof Disabler v4.31 for Kmeaw CFW
To quote: Here is a Kmeaw PSN / Spoofer v4.31 Enabler and Disabler. The Enabler allows you to connect to PSN without any PC based progs, and also spoofs to v4.31. The Disabler restores the original Kmeaw files and returns to v3.55. Both Spoofed and Unspoofed modes are compatible with ReactPSN. I'll do a Rebug update package when I get the chance.
Note:
If you are using any other spoofers, disable and uninstall them. If you have been using FckPSN, put your original 'CA27.cer' back. Also put your network settings back to normal if you have altered them for connecting via a PC PSN app. This is for Kmeaw users only.
Usage:
Install both the Enabler and Disabler PKG's. To enable PSN and spoof to v4.31, run the Enabler, the screen will go black for about 15 secs, PS3 will then restart, your pad will have disconnected too so press the PS button. You can now check your firmware version in system info, it should say 'version 4.31' and you should now be able to connect to PSN. To disable and return to v3.55, just run the Disabler, screen goes black again and PS3 restarts.
Credits:
Thanks to Evilnat for the eboot. Aldo for his excellent toolset. Itskamel for psn on 3.55. Rebug.
Download: http://www.mediafire.com/?ddedyeyoz742dyt
To quote: Here is a patched Rebug 0.7 Update Package to enable PSN and v4.25 spoofing on Rebug 3.55.2 Firmware. You must already be using Rebug FW 3.55.2 to use this. If you have already installed Rebug's Official Update 0.7 before, you can still install this. This package relies on you using Rebug's own CEX / DEX Selector to change between 3.55 and 4.25 (PSN access).
Info:
I have used all original Rebug files and patched them manually. The 'version.txt' was pulled from the original 4.25 pup. Selfs and 'index.dat' were rebuilt using fail0verflow tools. 'vsh.self.swp' and 'vsh.self.cexsp' are correctly patched to enable PSN access, 4.25 spoofing and switching between Debug and Retail XMB modes without causing RSOD. There are basically 3 modes:
Mode: Normal XMB: Debug = no spoofing (3.55), no PSN access, has 'Debug' options in 'Settings'.
Mode: Rebug XMB: Debug = Spoofed (4.25), PSN enabled, has 'Debug' options in 'Settings'.
Mode: Rebug XMB: Retail = Spoofed (4.25), PSN enabled, no 'Debug' options in 'Settings'.
All above modes are tested working with Reactpsn.
Credits:
Thanks to Itskamel for his perseverance in sussing out how the fw version should be written in the self. The anonymous source who released the current PSN pass-phrase. Fail0verflow for their tools. Rebug.
Installation Instructions:
Before you install this package, make sure you are in 'normal' mode (3.55) and are not using any other spoofers. If you are, disable and uninstall them. If you have been using FckPSN, put your original 'CA27.cer' back. If you are already spoofed (rebug mode) using Rebug's CEX/DEX selector, use it again to change back to 3.55. Do this by pressing 'L1 + Cross(X)' within the selector. Status should say 'Normal Mode'. Exit selector and check system FW is 3.55.
Now install the 'Rebug_PSN_UPDATE_0.7r3_3.55.2.pkg' from the link below. If you get the message 'same version already installed, continue' select 'YES'.
Now run 'Rebug Unofficial PSN Update Package 0.7r3 (3.55.2)' from XMB (ignore the stuff about v4.11). Select 'YES'. You will get a message 'Update Complete - System Will Reboot'.
After reboot, go back into Rebug's CEX/DEX selector. Press 'L1 + Circle(O)' to activate Rebug mode. Press 'PS' button and exit the selector. System will reboot. Now check in system settings/info that your firmware version says 'version 4.25'.
If it does, you have done the above procedure correctly and you can now log in to PSN. You can also now uninstall 'Rebug Unofficial PSN Update Package 0.7r3 (3.55.2)' from XMB.
Note: If you haven't installed Rebug's CEX/DEX selector, you can find it in 'Install Package Files'/'PS3 Hard Disk'. Both versions 1.5.1 and 1.6.1 work fine. This is for Rebug 3.55.2 Firmware only.
More PlayStation 3 News...