PS3ITA Loader and Core PS3ITALD.Self for Rebug 4.30.2 PS3 CFW Out


53w ago - Following up on the previous modification and the Rebug 4.40 Spoofer, today Italian PlayStation 3 developer Rancid-o has released PS3ITA Loader and Core PS3ITALD.Self for Rebug 4.30.2 PS3 CFW with details below.

Download: Ps3ita_loader-Rebug_4.30.2.rar (263 KB) / Ps3ita_loader-Rebug_4.30.2.rar (Mirror)

To quote, roughly translated: Given the numerous requests we decided to release a version for Rebug Custom Firmware 4.30.2 of our Ps3ita loader and Core ps3itald.self.

Ps3ita loader allows to install the functions of your choice on dev_flash which will then be executed automatically at boot console from the core ps3itald.self

The functions can be installed:

  • Install_new_idps: change the console id of your console permanently with one of your choice. The console id must be real (not invented)
  • Install_retail_idps: change the console id from DEX to CEX. The function can obviously only be installed if you are using CFW Rebug mode DEX.

Additional functions not installed:

  • Lv2: do a lv2 dump and save it in / dev_usb000/ps3ita
  • Lv1: does a dump of lv1 and saves it / dev_usb000/ps3ita
  • Dev_flash: overwrite one or more files of your choice in dev_flash the ps3, just insert the files in / dev_usb000/ps3ita/dev_flash and function will sotituirli the PS3.

How to install and use the functions:

1. Ps3ita Copy the folder in the root of the USB stick.

2. Move the flag you want to install from the / ps3ita/NOT_ACTIVE in / ps3ita. The flags are simple text files, and inside they explained their function.

The only flag that requires a change is "install_new_idps", you have to open this file with any text editor and enter a console where indicated id VALID. All other flags are simply moved to the specified folder.

3. Insert the USB stick into the port on the right of the PS3.

4. Install the pkg "Ps3ita_Loader-Rebug_4.30.2_version" and run it.

If something goes wrong, the LED turns red, otherwise fine. A log file in / dev_usb000/ps3ita cmq will be created to verify if all the steps have taken place correctly.

5. The PS3 will reboot and the functions will be active.

NOTE: The "install_new_idps" works perfectly in any mode setting Rebug 4.30.2. Tested by us:

  • Target id: DEX / Lv2 Kernel: DEX
  • Target id: DEX / Lv2 Kernel: CEX
  • Target id: CEX / Lv2 Kernel: CEX

So do not be afraid to change the mode when you want to.. We take this opportunity to thank again for his Miralatijera sys_init_osd.self!

From Luckystar: 4.30.2 Rebug target id DEX and kernel DEX install_new_idps not work! The log shows successful, but when I boot everything is normal, memory, and has not changed nor IDPS. This program just boot and automatically modify the memory idps right? Sorry, my bad English.

From haz367: Minus the 8E target ID = (new) Retail CEX type, that "value" if on DEX should be "82" as also the other offsets eid0 block dex values..

Default console id: 000000010082000bxxxxxxxxxxxxxxxx
Finded target id DEX and kernel DEX
Console id changed to: 00000001008e000axxxxxxxxxxxxxxxx

Block 2F077>2F07F from starting point IDPS offset 2F070 should be different to one another as also the converted block 002f090 t/m 002f14f and second IDPS ONLY at offset/ block/line 303D0-303DF

Rex cex/dex flashes, u have used the dexflash to patch new IDPS, then use 82 instead when pasting the new IDPS edit the 8E to 82 but as this tool uses the conversion for eid0 it calculates values for that "idps" so when u provided the new one: 00000001008e000axxxxxxxxxxxxxxxx

Block 002f090 t/m 002f14f changes after patching, then u patch..ps3 boots REX DEX but no change when checking idps? good that it boots. provide idps: 000000010082000axxxxxxxxxxxxxxxx instead, not tested but it should give another patched result/verify them?! makes sense?

Tested.. yup if you want to do this on rex dex side and using that dump, for correct patching, edit 8E to 82 only! and after patching idps/mac, open that patched dump with HxD, click search - goto - paste: 303D0 - enter and edit only!303D5 back to 8E

That is at least a correctly patched DEX-FLASH.EID0.NORBIN with new IDPS/MAC... if it works do stuff at your own risk.

From Rancid-o: This tool patch the idps in the ram when you start the PS3. Try this: Download this: https://www.dropbox.com/s/zqbz7vkkkxniu39/ps3ita.rar

Move the folder ps3ita in the root of your usb pen and run ps3ita loader.

Finally, from Luckystar: Rebug 4.30.2 results:

  • cex idps+cex lv2 it work
  • dex idps+cex lv2 not work
  • dex idps+dex lv2 not work




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 330 Comments - Go to Forum Thread »

Quick Reply Quick Reply

PS3 News's Avatar
#150 - PS3 News - 51w ago
Following up on their previous updates, Sony PlayStation 3 hackers Cyberskunk and evilsperm of Team Rebug have now made available Rebug 4.41.1 Lite Edition followed by 4.41.2 Lite and Rebug 4.30.2 D-REX Edition PS3 Custom Firmware (CFW) with details below.

Download: REBUG_4.41.2_LITE_PS3UPDAT.PUP (scmods.com/rebug/firmware/REBUG_4.41.2_LITE_PS3UPDAT.PUP) / REBUG_4.41.2_LITE_PS3UPDAT.PUP (Mirror) / REBUG_4.41.1_LITE_PS3UPDAT.PUP (scmods.com/rebug/firmware/REBUG_4.41.1_LITE_PS3UPDAT.PUP) / REBUG_4.41.1_LITE_PS3UPDAT.PUP (Mirror) / REBUG_4.30.2_D-REX_PS3UPDAT.PUP (scmods.com/rebug/firmware/REBUG_4.30.2_D-REX_PS3UPDAT.PUP) / REBUG_4.30.2_D-REX_PS3UPDAT.PUP (Mirror)

To quote: REBUG 4.41.2 LITE EDITION - MAY. 1ST 2013 - FIXED - Bug stopping pkg files installing on non-QA'd PS3

Normally we would not release an entire cfw just for a minor bug but the nature of this one left some people in a state where they could not install a pkg file because they were not QA'd, while at the same time they could not QA because they could not install the pkg file..

This has been completely addressed and there is no more issues. It is recommended for everyone that has already installed 4.41.1 to install this new PUP just in case you deactivate your QA and leave yourself in the chicken/egg state explained above. Sorry for the inconvenience guys.. Enjoy..

REBUG 4.41.1 LITE EDITION - APR. 30TH 2013 FIRST RELEASE - See below for full LITE EDITION features.

REBUG 4.30.2 D-REX EDITION - APR. 30TH 2013 FIRST RELEASE - All 4.30.2 REX EDITION Features (Firmware is identical)

FEATURE - Installs on DEX PS3 System

FEATURES FOR REBUG LITE EDITION FIRMWARE ONLY

  • FEATURE - QA Token compatibility
  • FEATURE - OtherOS++ support enabled (Use Rebug Toolbox to Boot OtherOS with different LV1 patches)
  • FEATURE - Package Manager (Replacement for the standard 'Install Package Files' option)
  • INCLUDED - Rebug Toolbox 02.xx.xx (Install included Rebug Toolbox or higher for full compatibility)
  • PATCHED - LV1: Disable System Integrity Check (Safe to use with mismatched COREOS/SYSCON versions or if PS3 is not QA enabled)
  • PATCHED - LV1: Undocumented function 114 (Allow mapping of protected memory)
  • PATCHED - LV1: Skip all ACL Checks (Needed to allow booting of OtherOS)
  • PATCHED - LV1: Peek and Poke support (Unused LV1 call 182 and 183)
  • PATCHED - LV2: Peek and Poke support (LV2 Syscall 6 and 7)
  • PATCHED - LV2: Peek and Poke support for LV1 (LV2 Syscall 8 and 9)
  • PATCHED - LV2: LV1 CALL System call (LV2 Syscall 10)
  • PATCHED - VSH: Allow Unsigned act.dat and *.rif files
  • PATCHED - VSH: Disable Unlinking/Deleting of act.dat

From Cyberskunk: These are the patches that allow ReActPSN to work.. YES.. Install from XMB (like always)..

  • PATCHED - VSH: Allow Unsigned act.dat and *.rif files
  • PATCHED - VSH: Disable Unlinking/Deleting of act.dat

You will need to run dev_blind or some other tool to mount writable dev_flash.

Download: explore_plugin.sprx.441_rbg (Test File) / explore_plugin.sprx.441_rbg (Mirror)

Rename file to explore_plugin.sprx and copy over to the dev_flash/vsh/module dir. Let me know.. You need to mount dev_flash as writeable.. using dev_blind or some other tool.. so if you used dev_blind then you would copy it to the dev_blind/vsh/module dir

Update: You nearly led me on a wild goose chase.. The TEST file i posted works.. It fixes the problem.. Make sure you mount dev_flash as writeable in mM settings and copy to /dev_blind/vsh/modules/ dir. The error is with myself and the people that tested for us.. We did not disable QA during our testing.. If we had of we would have picked it up straight away.. It is a minor bug that is easily fixed..

Anyone that installed the LITE version and was NOT QA'd just needs to install this new PUP.. OR if they have FTP access and writeable dev_flash mounted.. They can use the fixed explore_plugin.sprx that i posted little while ago. Install the new Toolbox after that and QA your PS3.. It has many benefits.

From evilsperm: There is no ETA on full ver. We need to get our hands on the latest DEX FW and so far no one is willing to share

Q: WHAT IS D-REX EDITION?
A: Basically D-REX EDITION is REX EDITION that can be installed on a REAL DEX or coverted DEX PS3 System.

Q: WHAT IS LITE EDITION?
A: LITE EDITION is straight up CEX/RETAIL PS3 firmware it has NO DEX/DEBUG features.. AT ALL.

Q: WHY MAKE LITE EDITION?
A: Because at the moment 4.4x DEX firmware is not in the wild and we 100% refuse to make a version hybrid (using 4.30 DEX files in 4.41). There is approx. 70 files that need to replaced in CEX firmware for it to become a complete DEX firmware. About 40 of those files at least have been updated in the CEX firmware since 4.30 (if you look at 4.40 PS3PATCH.PUP) and more again with 4.40 and 4.41. With so many file changes it makes a nice recipe for instability..

NOTE: Remember to update to the latest Rebug Toolbox included in the LITE EDITION firmware.

Enjoy

~ Codename: REBUG Team

MD5 Hashes:

  • REBUG_4.41.2_LITE_PS3UPDAT.PUP - c974aaf02e14ac002cbb9a0d80a40890
  • REBUG_4.41.1_LITE_PS3UPDAT.PUP - 26db0c444ebf09c9ad58790d57d7a700
  • REBUG_4.30.2_D-REX_PS3UPDAT.PUP - 43a716b43dd6e920323ed4815c780ef3

Note: Currently ALL backup managers will NEED to be UPDATED to support full usage of this Custom Firmware v4.41 PUP on your Sony PlayStation 3 console!!!

Finally, from Estwald (via elotrolado.net/hilo_aplicacion-iris-manager-v2-36p_1862716_s790#p1732366483), roughly translated:

Hello, Notice to mariners that I am in 4.40 and not move from there I think: what others do, is your problem

Meanwhile, Iris Manager is open source: if someone adjusts the pads (on their own) to 4.41 will be added without problem, but you should not expect that job I always touch me, why not.

With 4.40 already happened: Miralatijera adapted it, but made two rulings that touched me solve me, causing no need to rise to 4.40 real and now, when he took nothing, and the people are with 4.41... as for me, that's not going to happen, because I do not like changing socks and CFW how we as a run... .

On the other hand, the issue of regulation is being tested fan while playing (which I will touch ), and so far, it seems to be going well: I had some problems because of the time consumed some functions that generate instability, but it seems that it does not matter so much trouble.

I guess if you do not suffer setbacks, tomorrow publish the tool in another thread, but for now, not be included in Iris Manager. Patches, by the way, are for 4.31 and 4.40.

Regards

More PlayStation 3 News...

Azrial's Avatar
#149 - Azrial - 51w ago
I don't think it does, they will normally release another update for other CFW shortly afterwards.

echoes4ever's Avatar
#148 - echoes4ever - 51w ago
Can i use it with my rogero 4.40 ??

Azrial's Avatar
#147 - Azrial - 51w ago
Why did I not see this post last night, I could have been updating my trophies!! Mucho thankies team Rebug, and PS3 News for letting me know, I love you guys.

PS3 News's Avatar
#146 - PS3 News - 51w ago
Following up on their Rebug PS3 4.41 Version Spoofer 2.3, Sony PlayStation 3 hackers Cyberskunk and evilsperm of Team Rebug have also released Rebug Update Package 0.2 for 4.21.X and 4.30.X allowing Custom Firmware (CFW) users to connect to PSN.

Download: Rebug_Update_Package_0.2_4.21.x.pkg (scmods.com/rebug/pkg/Rebug_Update_Package_0.2_4.21.x.pkg) / Rebug_Update_Package_0.2_4.21.x.pkg (Mirror) / Rebug_Update_Package_0.2_4.30.x.pkg (scmods.com/rebug/pkg/Rebug_Update_Package_0.2_4.30.x.pkg) / Rebug_Update_Package_0.2_4.30.x.pkg (Mirror)

To quote: Rebug Update Package 0.2 - 4.21.x and 4.30.x - THIS ALLOWS PSN ACCESS - USE AT YOUR OWN RISK - FOR REBUG 4.21.x AND REBUG 4.30.x ONLY - YOU MUST BE IN REBUG MODE TO ACCESS PSN

This will update REBUG's version spoof files to 4.41 and allow connection to PSN.

UPDATER WILL PERFORM THE FOLLOWING TASKS

Update the current version spoof files to 4.41 with PSN access

INSTALL

1: Install Rebug_Update_Package.pkg file from XMB
2: Run Rebug Update Package from the [Games] menu
3: Follow the on screen prompts
4: PS3 will reboot if needed when finished

NOTE: Once the PS3 has rebooted you can delete Rebug Update Package from your XMB as it is not needed.

NOTE: Please do not email us about game compatibility. Some may just require a simple PARAM.SFO edit to get past the latest game update, others may not work at all because the game NEEDS the newer files.

More PlayStation 3 News...













Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News