Sponsored Links

Sponsored Links

PS3 CFW 4.53 Ferrox v1.00 Custom Firmware by Alexander Arrives


Sponsored Links
32w ago - Following up on his previous release and Sony's PS3 Firmware 4.53 update, today Italian PlayStation 3 developer Alexander has released PS3 CFW 4.53 Ferrox v1.00 Custom Firmware with the changes outlined below.

Download: [Register or Login to view links] (193.6 MB)

MD5: 11FB844002F20303CAE40057261F5EF6

To quote, roughly translated: Developer Alexander has released PS3 CFW 4.53 Ferrox v1.00!

FEATURE LIST:

  • Built on an OFW 4.53.
  • Disabled the coreOs and control ECDSA
  • LV1: patched to remove the protection LV2
  • LV1: Peek & Poke
  • LV2: Peek & Poke
  • LV1: patched coreOs Hash Check (prevents the brick from the console downgradate not dehashed)
  • Compatibility PS2 Games
  • Compatibility PSP Games Remastered
  • Compatibility Games PSP Minis
  • Keys / Key 4.53 (Start play with 4.50 EBOOT keys / SPRX)
  • PSN / SEN Allowed for return online
  • RSOD Screen Bypass for consoles suffering from RSOD
  • PS3 BT Remote patch
  • PS3 BluRay DISC patch
  • Compatibility with the latest version of REACTPSN (version 0.1 alpha)
  • app_home/PS3_GAME
  • Install Package Files
  • Ability to Downgrade from OFW 3.55 with qa activated.
  • Can be installed by Rogero CFW 4.xx (It is recommended to RECOVERY)
  • Can be installed CFW Rebug 4.xx ( It is recommended to RECOVERY)
  • Can be installed CFW Habib 4.xx ( It is recommended to RECOVERY)
  • Upgradeable from 4.46. FERROX 1.2 (XMB)
  • Support InGame XMB ScreenShot Feature (thanks mysis of ps3 dev wiki)
  • Support Remote Play Feature
  • Stability as OFW 4.53.
  • Speed ​​of the system increased
  • Ability to downgrade from any custom firmware with qa activated.

Tested on:

  • CECH-2001A ( SLIM 120gb ) [ Working!. ]
  • CECH-2501A [ Working!. ]
  • CECH-2002B [ Working! ]
  • CECH-2001B ( 250gb SLIM ) [ Working!. ]
  • CECHG04 [ Working! ]
  • CECHE [ Working!. ]
  • CECHL04 [ Working! ]
  • CECH-2004B [ Working!. ]
  • CECH 2004A [ Working! ]
  • CECH-2504A Datacode 1A [ Working!. ]
  • CECH2104A [ Working!. ]

For all those who incur 8002F157 error, it means you have not enabled MODE 'ON DEBUG ON via the qaflag and then have to do the deashing on the console.

To correct this error: Install CFW 4.21 Rebug or CFW that allows you to activate the qa flag and the mode 'debugging. Upgrade to OFW 3.55 for two times in a row. That's right, to install RECOVERY twice the OFW 3.55. Proceed with the installation of any other CFW's.

I remind you that the starting point of this custom firmware is 3.55 Original Firmware or any Custom Firmware.

MANDATORY: It is recommended that, after a successful installation of custom firmware, run:

  • Settings> [System Settings]> [Restore Default Settings] (From XMB)
  • Restore File System (Recovery)
  • Rebuild Database (Recovery)

So, you will have a clean install and you'll be fine (Thanks to franci97 & SonyForever).




Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter and be sure to drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene updates and homebrew releases!

Comments 68 Comments - Go to Forum Thread »

• Please Register at PS3News.com or Login to make comments on Site News articles. Thanks!

prince8x's Avatar
#23 - prince8x - 5w ago
Thanks you for the Support!

shummyr's Avatar
#22 - shummyr - 5w ago
Awesome job

PS3 News's Avatar
#21 - PS3 News - 5w ago
Following up on his previous update, today Italian PlayStation 3 developer Alexander has released PS3 OFW 4.60 Ferrox (Dual Boot) followed by PS3 CFW 4.60 Ferrox v1.01 BD Edition Custom Firmware with the changes outlined below.

Download: [Register or Login to view links] (196.2MB - MD5: D3BFCE1A6DF41610AE1293F19833E50F) / [Register or Login to view links] (195.2MB - MD5: 65686204A5B4BAD4D80FDDB9D682B8F9)

To quote, roughly translated: OFW 4.60 FERROX (Dual Boot) By Alexander!

Alexander is working to correct the original Bug Games FERROX CFW 4.60, but in the meantime there is another small gift, not of little importance. I'm talking about the OFW 4.60 FERROX (Dual Boot). The CFW DUAL BOOT primarily have been issued by Habib.

These "CFW" are nothing more than the OFW "unlocked" that allow the downgrade. The utility is simple, we can go online installing it as if we had a real OFW (Only for consoles NOT banned) (So nothing and Homebrew Games Backup), but at the same time, we will install a CFW 4.XX to return to using Homebrew and Backup.

FEATURES:

  • Disabled ECDSA in LV0 loaders. (Isoloader)
  • Disabled ECDSA in SPU PKG (spu_pkg_rvk_verifier).
  • No function for CFW'S enabled. So, no nothing Homebrew and Backup.
  • No QA FLAG Enabled.
  • Possible Downgrade, installing a 999 or a Downgrade 4.60 CFW [via XMB].

NOTES:

  • The Games Original work.
  • Downgrade done with the 4.60 FERROX 1.00, Via XMB.
  • Do not be installed on Console Player with Broken or Absent.

In spite of all we do not recommend the use of this OFW, 'cause we're not 100% sure of the countermeasures taken by SONY antiban, even if the odds' of banks, however, are minimal compared to a normal Custom Firmware.

Note from Habib: He disabled all loaders of lv0 he stated. IT IS NOT SAFE TO GO ONLINE WITH THAT REPORTS TELLS US THAT DISABLING ECDSA OF LV1LDR CAN TELL SONY ABOUT MFW.

If anyone can, just tell him to disable only isoldr ecdsa check plus make file with same filesize if he can (openssl etc).

Update: CFW 4.60 FERROX 1.01 [BD EDITION] By Alexander! (via openmodding.net/Thread-Working-CFW-4-60-FERROX-1-01-BD-EDITION-By-Alexander?pid=94303#pid94303)

After much hard work and a lot of testing at the end of Alexander was able to fixare the bug that did not allow games to start giving the original error 800XXX17. Now you can rest assured the original game works perfectly. Unfortunately still have not updated the Different Backup Manager, but we have heard that it is in the release version updated Gamesonic Manager. Below I leave you download.

FEATURES:

  • Built on an OFW 4.60
  • Disabled the coreOs and control ECDSA
  • LV1: patched to remove the protection LV2
  • LV1: patched coreOs Hash Check (prevents the brick consoles downgradate not dehashed)
  • LV1: Peek & Poke
  • LV2: Peek & Poke
  • Compatibility PS2 Games
  • Compatibility PSP Games Remastered
  • Compatibility Games PSP Minis
  • Key 4.60 (start games with keys 4.xx EBOOT / sprx)
  • PSN / SEN Enabled.
  • RSOD Screen Bypass for consoles suffering from RSOD
  • PS3 BT Remote Patch
  • PS3 BluRay DISC patch
  • Compatibility with the latest version of the REACTPSN
  • App_home/PS3_GAME *
  • Install Package Files *
  • Ability to Downgrade from OFW 3:55 with QA enabled.
  • Upgradeable from any CFW's
  • Support InGame XMB ScreenShot Feature
  • Supports Remote Play Feature
  • Stability as nell'OFW 4.60
  • Ability to downgrade from any custom firmware with QA enabled.

TEST:

  • CECH 2004A - Via XMB with System Update Debug ON - From 4:55 HABIB CFW / COBRA without SPOOF.
  • CECHG04 - Tested and Working.
  • CECHL-01A
  • CECH-2501
  • CECH 2504A

CHANGE LOG:

  • Fixed a bug of the original games that were not started. Bug due to exchange of modules OFW 4.60.

Thank you all for your support.

More PlayStation 3 News...

kalberto's Avatar
#20 - kalberto - 5w ago
REMEMBER: Do not Install cfw 4.60, before GAME MANAGER support 4.60 arrives

PS3 News's Avatar
#19 - PS3 News - 5w ago
Following up on his previous updates, today Italian PlayStation 3 developer Alexander has released PS3 CFW 4.60 Ferrox v1.00 BD Edition Custom Firmware with the changes outlined below.

Download: [Register or Login to view links] (195.2MB - MD5: 5F65A07BEAA6733BE202479C47DB248D)

To quote, roughly translated: CFW 4.60 FERROX BD EDITION 1.00 By Alexander!

After the release of OFW 4.60, Alexander releases CFW 4.60 FERROX to version 1.00. This is the version BD EDITION, then be installed on the console with BD DRIVE functioning. In the coming days Verrano released the BD EDITION NO and Version DualBoot. Below is more details.

FEATURES:

  • Built on an OFW 4.60
  • Disabled the coreOs and control ECDSA
  • LV1: patched to remove the protection LV2
  • LV1: patched coreOs Hash Check (prevents the brick consoles downgradate not dehashed)
  • LV1: Peek & Poke
  • LV2: Peek & Poke
  • Compatibility PS2 Games
  • Compatibility PSP Games Remastered
  • Compatibility Games PSP Minis
  • Key 4.60 (start games with keys 4.xx EBOOT / sprx)
  • PSN / SEN Enabled.
  • RSOD Screen Bypass for consoles suffering from RSOD
  • PS3 BT Remote Patch
  • PS3 BluRay DISC patch
  • Compatibility with the latest version of the REACTPSN
  • App_home/PS3_GAME *
  • Install Package Files *
  • Ability to Downgrade from OFW 3:55 with QA enabled.
  • Upgradeable from any CFW's
  • Support InGame XMB ScreenShot Feature
  • Supports Remote Play Feature
  • Stability as nell'OFW 4.60
  • Ability to downgrade from any custom firmware with QA enabled.

ONLY BUG:

Report the error 80010017 when starting the Backup Originals. This, however, should not compromise the start of the new Babkup Bootable Backup Manager updated with the payload 4.60. We will try to resolve as soon as possible, just figured out where the problem lies.

TEST:

  • CECH 2004A - Via XMB with System Update Debug ON - From 4:55 HABIB CFW / COBRA without SPOOF.
  • CECHG04 - Tested and Working.

The FW is very similar to the 4.55 then there have been no tests on all models of the PS3. I did the test on my console and it was fine, clean installation, and all Feature running. However do yourself a backup of the NOR and NAND, for safety.

Unfortunately there are still Backup Manager updated, so you'll have to wait a little. Thank you to all the users that support us and help us. Also thanks to all the staff.

More PlayStation 3 News...

Sponsored Links

Sponsored Links
Sponsored Links

Sponsored Links







Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News