Guide: XBox 360 Hack - Free60 Homebrew With No Chip Needed

[PS3 News]

Today French site Logic-Sunrise.com (linked above) has published a guide based on the Free60 Exploit and the work of http://www.xboxhacker.net/index.php?topic=12222.0.

For those seeking to give it a try, to quote: "We're going to explain you the Free60 exploit, which consists in launching decrypted code (hello word) on a Xbox 360 system.

Once this bug has been well exploited, It will be possible, in a near future, to use your Xbox 360 as a media center, and for example lauch XBMC, or homebrews (megadrive, SNES emulators, and others) and maybe Xbox 360 games from the hard disk as well, everything a Xbox 1st generation did but more powerfully !

But before being there, there is a long way to do, even if the basis is here : it's now possible to load decrypted code on Xbox 360 system. It's been for 4years we have waiting for this huge news !

This tutorial is written in order to explain the way to hack you Xbox 360. No chips needed !

What you need :

- a Xbox 360 XENON system
- parallel port adaptater
- NAND Pro, available here : http://www.logic-sunrise.com/telechargement-40683-nand-pro.html
- solder gear
- a PC with parallel port (printer port)
- three 330 Ohms resistances

Let's Go ! :

1 - 1 - Open up your Xbox 360 system

You can find the tutorial here : http://www.logic-sunrise.com/dossiers-et-tutoriaux-16074-demonter-sa-xbox-360.html

2 - link the motherboard solder points to the parallel port ones :

3 - Download and install the NAND Pro, available in download here : http://www.logic-sunrise.com/telechargement-40683-nand-pro.html Then unzip the package, and install the port95nt.exe



You must reboot your PC. Once on Windows, launch a CMD MsDOS (start, run, cmd, then press enter). Run in the unzipped directory : NandPro.exe, writing in the CMD : NandPro.exe lpt: -r16 nand.bin



NandPro is going to test all you parallel ports, and recover you system Nand. Make sure you keep it
With a parallel port, the operation can take 30mins. Once the thing is done, you should get your nand.bin, about 16Mb







Operation success !

Now you can Write the nand, by a hacked one (xenon_hack.bin for example), typing : NandPro.exe lpt: -w16 nand.bin

Final

READING WILL OVER-WRITE AN EXISTING FILE WITHOUT WARNING!
NEW LOG FILE WILL OVERWRITE OLD WITHOUT WARNING!


More PlayStation 3 News...

Attached Images

	1.jpg (592.9 KB, 83 views)
	2.jpg (109.8 KB, 978 views)
	3.jpg (107.2 KB, 951 views)
	4.jpg (110.8 KB, 938 views)
	5.jpg (129.1 KB, 936 views)
	6.jpg (143.3 KB, 950 views)

[thon0925]

The tutorial is well written, but they blatantly took relapse's photo and tried to put their watermark over his without his permission. Otherwise, it's a nice guide.

[JeffJ]

too bad its only the xenon boards, id live to just straight flash one of my HDMI units.