PS3 Firmware Version Check Bypassed thread!

[davevt98]

Originally Posted by SupraGaz Are you using Posadis 0.60.6?

I just tried to set it up and it is not working for me. Do you have any further instructions? Thanks

[rawdog805]

WOW... I cant believe that I finally figured it out...


Thank You Thank You Thank You!

[Yaguchi]

I'm getting Internet Connection failed Error 80710102
Is this the correct setting for the Ps3?

IP Address (IP address of the Ps3)
Subnet Mask (No change)
Default Router (Router address)
Primary DNS (IP of my computer running Simple DNS Plus)
Secondary DNS (Blank)

[davevt98]

Originally Posted by evilsperm Though I would share this with all fo you =) THIS IS FOR WINDOWS USERS (ANY VERSION OF WINDOWS WILL DO)

Is this for the US address? I keep getting a dns error. Any tips?

[Yaguchi]

I made a mistake for my primary DNS address, just go into run "Cmd" then "ipconfig" in the terminal to show the address of your computer running the server. I also have a question, Am I suppose to have Type 3 for the NAT settings.

[hunter316]

Originally Posted by evo8 Yup, I got this too. CJPC provided some kind assistance (check the readme and some of the earlier posts to this thread). Basically you need to re-install two packages and possibly re-compile one of them. I'm guessing you are running FC5, so the commands below may need to be changed for other distros. Open a terminal window. 1. Remove libtool and libtool-ltdl (if installed already) > sudo yum remove libtool libtool-ltdl 2. Re-Install the packages libtool and libtool-ltdl > sudo yum install libtool libtool-ltdl 3. Try re-running the ./configure --install-plugins 4. If it still doesn't work then recompile the libtool-ltdl package > cd /usr/share/local/libtool/libtool-ltdl > ./configure > make > sudo make install 5. Try the ./configure --install-plugins command. It should now work. Not sure whats happened in FC5 but it looks like some of the packages including libtool are missing key files, recompiling the packages seems to fix the problem. On a wider note, from reading some of the posts below it would appear some people are struggling to get this to work. I can confirm that the guide is indeed correct and the bypass works superbly (I have it running with no problems). ;-) Word of warning though, make sure that your PS3 and your PC (running the DNS spoof) are on the same IP subnet with access. I had my PS3 originally in a DMZ and it caused all sorts of problems.

i tried this, but this is what i got:

Setting up repositories core [1/10] file:///mnt/cdrom/repodata/repomd.xml: [Errno 5] OSError: [Errno 2] No such file or directory: '/mnt/cdrom/repodata/repomd.xml' Trying other mirror. Cannot open/read repomd.xml file for repository: core failure: repodata/repomd.xml from core: [Errno 256] No more mirrors to try. Error: failure: repodata/repomd.xml from core: [Errno 256] No more mirrors to try.

what am i doing wrong?

[Frajmow]

do you need any firware in particular to do this thing?

[Yaguchi]

I believe firmware 1.5 is the current one, and I tried this on my Ps3 and didn't have any problems. I tested onlne store, browser, and resistance; all of them work fine.

[SPYdir]

evilsperm do we leave the 2h (2 hours) option as default?

[MaleBoricua]

Originally Posted by BAMitUp Ok you guys, building onto this. To find all the numbers to manually input into the ps3 follow these steps. b) In your PS3 IP setup... IP: To find the IP Address of the PS3, set up the internet as automatic (not manuel), after that go into Internet Settings and look at the IP Address. Copy that down for later. Subnet Mask: 255.255.255.0 (in most cases) Default Router: To find this, go into start>run>type "cmd">type "ipconfig /all">look for "Default Gateway"; copy that down and label it as Default Router. Primary DNS: Now don't be all smart and go copy down whatever numbers you want, or you could. This number is located at the same place the Default Router number was... It's the "IP Address". This is the number you going to be inputting as Primary DNS Secondary DNS: Don't need it. There you have it. Enter all the information accordingly into the PS3 MANUEL!!! Settings. Mucho amo.

I tried this and still I get the same as before... I don't think i'm ever gonna get this to work