Sponsored Links
IGN Australia (linked above) is reporting that the new PlayStation 3 Firmware 2.50 is incompatible with their Sony amp/receiver and greets them with a black screen. As soon as they cut the 7.1 Sony amp/receiver supporting 1080p over HDMI out of the picture, things worked which to them is "utterly boggling". Sony is yet to comment on this issue...

To quote: Last week Sony released firmware 2.50 for the PS3. However, in a bizarre turn of events the latest firmware prevents the PS3 from displaying an image on some state-of-the-art Sony home theatres.

We installed firmware 2.50 yesterday only to be greeted by a blank screen. After much swearing and trouble-shooting we discovered it was the Sony amp/receiver that was incompatible with the new firmware. We were able to get a picture again by cutting the Sony amp out of the loop and going straight into the projector.

For the record the IGN AU PS3 setup includes a 7.1 Sony amp/receiver supporting 1080p over HDMI and a 1080p Sony projector. The fact that the new firmware renders the PS3 unusable with this top-line Sony home theatre is utterly boggling.

On a related note, while trouble-shooting the problem we hooked the PS3 up to the projector via composite and also found that it's currently only displaying a black and white image over this video signal. These are both quite serious bugs to sneak through with the latest firmware. More PlayStation 3 News...