Sponsored Links

Sponsored Links

Results 1 to 3 of 3

  1. #1
    Senior Member atko's Avatar
    Join Date
    Jan 2011
    Sponsored Links

    [Answered] Trying to fix PS3 brick using PSP jig help?

    Sponsored Links
    I'm getting the 5 beeps of death when going back from CEX to DEX. I'm using the psp jig but its only getting me so far.

    Using my psp i can get this far:

    On the PS3:

    2. Switch off ps3 from power cord
    3. Put the USB Dongle with service mode payload in the right usb port
    4. Put power cord in the console
    5. Press power button followed quickly with eject button, the console should boot, and then reboot. (if the beeps continue it's normal)
    6. Remove service dongle
    7. Put the USB Pen with the 2 files inside in the right usb port
    8. Power on the PS3. If all went well you shall see the ps3 reading stuff in the usb pen, and the hard drive of ps3 working, wait for the console to power off

    On step 8 i'm still getting the 5 beeps even though the jig has worked. What am i doing wrong? I've put the files onto a usb stick but the ps3 doesn't seem to be reading it. Its annoying me now

  2. #2
    Contributor kotnaphaha's Avatar
    Join Date
    Sep 2012
    Sponsored Links
    Sponsored Links
    a download for psp

    lv2diag.self: you have two versions, one for exiting one for entering the Factory Service Mode, (for downgrading or upgrading between 3.15 and 3.55 you have another lv2diag.self)

    this program is only for 3.15 to 3.55 and it is for entering and exiting FSM (exiting also can be done with a usb stick and the "exit" lv2diag.self)

    you can solve RSOD with that... un bricking

    if you want to switch between 3.15 and 3.55 (or any between) you have to take the "DGF" files (Downgrader Files) (DGF.rar mostly)

    edit: i am talking about cex

  3. #3
    Senior Member niwakun's Avatar
    Join Date
    Jun 2009
    Sponsored Links
    Sponsored Links
    common symptom for NAND console going back from DEX to CEX.

    I'm telling you, once you are going back to CEX, you can't as of writing this message and you will get a permanent brick, flashing back your DEX flash backup won't do anything anymore.

    Only NOR PS3 can do switch between CEX and DEX firmware.


Sponsored Links
Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News