Stuck in FSM after on Rebug 3.55.2 help?

[CDR022]

Hi everyone,

I bought a faulty PS3 a few months back with a missing hard disk and bluray drive. I managed to put a 500Gb 3.5" drive with it and got a new blurry drive which I am having issues remarrying.

I was running Kmeaw 3.55 but recently upgraded to Rebug 3.55.2 with update package 0.7 so I could access the PSN and hopefully lovefilm. However I couldn't get this to work as every time I started the app I got error message 80010017.

At this point I thought I would try remarrying the bluray drive again as this is a bluray error. Unfortunately without thinking I used FactoryServiceMode Tool V0.2 to enter FSM.

I tried remarrying with the 3.55 files on USB but this didn't work. I then realised that I didn't have the LV2diag_exit_.self file, I tried some other LV2diag.self files but can't exit FSM. I then also realised that Rebug spoofs to FW 4.11 and that is what system settings says.

Am I screwed?

All the best

Dave

[racer0018]

If you search for ps3 downgrades here you will find the file you need to get out of service mode. Also while you are in there remarry the Blu-ray. There is a zip file out there to use with 3.55 and it is easy but you have to be in service mode.

Here is the link. http://www.ps3news.com/ps3-hacks-jai...t-downgrading/

[CDR022]

I am still having problems; I have a USB HDD which is formatted in FAT32 on Mac Disk Utility. I have tried putting the remarry files and the LV2diag.self file on the root of the drive; but when I turn the PS3 back on it reads the drive for a short time from the right USB(0) but then boots up into Rebug in FSM again.

Am I doing something wrong or is it an issue because it is still spoofed to FW 4.11 and I thought there was an issue exiting FSM on FW 3.60 and above?

Dave

[mushy409]

Try a USB memorystick instead of a HDD. The PS3 can sometimes be picky with what drives you use...