Hey guys. Say PSGroove was releasedso I decided to fix my PS3. I searched up possible instruction so I can fix my PS3 in a update loop, but then noticed I had to do some electrician stuff. Care to guide me through it?
Instructions:
"There is a BIOS Battery connected with a two pin connector to the Board, remove the connector, you will notice there are actually 4 pins, turn the battery connector around and connect to the other two pins. This resets the system BIOS to default. Reconnect the battery, put it back together and your system will boot as if you just took it out of the box on the day you bought it."
This is how the bottom of the board looks like:
13250 HeyManHRU
13207 PS3 News
11287 elser1
11119 oVERSoLDiER
9248 GrandpaHomer
8578 Tidusnake666
7968 saviour07
7340 condorstrike
7258 deank
6858 OGroteKoning
24951 PS3 News
5279 Starlight
2965 HeyManHRU
2173 CJPC
2123 elser1
1818 cfwprophet
1756 her0
1570 oVERSoLDiER
1291 GrandpaHomer
1080 barrybarryk




