Sponsored Links

Sponsored Links

Results 1 to 3 of 3



  1. #1
    Junior Member dekaspace's Avatar
    Join Date
    Jul 2006
    Posts
    80
    Sponsored Links

    [Answered] Replacement blu-ray, fixed mechanism won't read help?

    Sponsored Links
    Ok I had a problem with my console not reading discs so bought a cheap replacement from someone with a ylod console, first the mechanism wouldn't load to took it apart and fixed it, or just about now the problem is it takes discs and spins but nothing else identical to old drive.

    First could this be a different issue? secondly I have the top of the drive off as when I press eject the top left mechanism seems to jam but could that also be the problem? When I say jam what I notice is the white plastic that goes under the spinning piece does not seem to fit under it and catches it making it rattle so I have to manually remove the part that spins then it ejects normally.
    Best Answer - Posted by racer0018:

    What all did you change over from the replacement? Thanks.

  2. #2
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    702
    Sponsored Links
    Sponsored Links
    What all did you change over from the replacement? Thanks.

  3. #3
    Junior Member dekaspace's Avatar
    Join Date
    Jul 2006
    Posts
    80
    Sponsored Links
    Sponsored Links
    All I did was take apart, reset mechanism, then put the loading sensor from old one in as the one from replacement snapped as I took it apart.

    Then logic boards.

    Had another go and same problem, Any ideas?

 

Sponsored Links
Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News