[Answered] Remarry PS3 Blu-ray drive confused help?
I have swapped a blu-ray from another ps3. I install Rogero 4.40 v1.02. Installed multiman 4.30 and all I get is black screen. Dang blu-ray still married to other ps3. So look to remarry the drive. The stuff I am find is old by 1 or 2 years. Downgrade this and downgrade that is there something newer I can use?
So with what I am reading and downloading I get Rogero downgrade pup and I go back to Rogero CEX-3.55 v3.7 cfw. Download the toggle qa package and factoryservicemode v0.2 tool because I don't have a dongle go into FSM. Once in FSM put the remarry package on the usb stick with 3.30 pup and remarry blu ray drive??
i managed to solve this issue by swapping the logic boards of the bluray drive that i want to use. by saying the logic boards, it is the board under the bluray drive. if it works and you cant get out of rogero 3.55 downgrader, use rogero 3.55 first and update via recovery.
afterwards, system settings should display that you are on 4.25 - go on ahead and update back to rogero 4.40 normally.
I got it into fsm and I think i did the test right but unsure what to do next. I got the big NG and i dont know how to fix it. any way some one can step by step with intructions to where it makes sense. Also I had all 4 files on one usb when ran. was that correct? Please HELP!!!!
Well not getting to far still black screen. I downgraded to 3.55 install toggle qa and factory service mode v0.2. Put the remarry files with the 3.30 ofw on a usb stick. Installed the pkg's and nothing black screen can't do nothing else. I can't swap logic boards because this ps3 had none and took blu ray drive from another ps3 that was getting ylod every 5 minutes.
Can I skip having a blu-ray drive and update to rogero 4.40? I just want to do everything off the hhd anyway