Sponsored Links

Sponsored Links

Page 1 of 2 12 LastLast
Results 1 to 10 of 20



  1. #1
    Senior Member B4rtj4h's Avatar
    Sponsored Links

    [UnAnswered] PS3Break V1.1 without bootloader help?

    Sponsored Links
    Ok... with the hype to get online with PSN i tried multiple .hex files on my PS3Break v1.1. At the end it could not verify anymore and now it doesn't even get recognised

    My windows says: An unrecognised usb object has been found. There are NO drivers for this one.

    Tried the Atmel site and the Atmel software (FLIP) but also that was not succesful.

    I loaded up my apple and tried to connect but he says: NO BOOTLOADER FOUND.

    Damn... bootloader is missin. How can i fix it?

  2. #2
    Contributor JailCenterKZ's Avatar
    Sponsored Links
    Sponsored Links
    There is no any working HEX for PIC chip yet. That means you can not even try to update PSBreak v.1.1.

    Reload your windows and insert dongle again. If it doesn't work, then you broke it.

  3. #3
    Senior Member B4rtj4h's Avatar
    Sponsored Links
    Sponsored Links
    -.- This does work and you can update it... OMG read man... the only problem is now that i pulled it out while verifying. So its broken :|

    PIC = Real PS3Break v1.1

  4. #4
    PIC is Microchip? This will not work with atmel software (different manufacturer).

    Also, you need to put the FLIP devices in a special mode to use FLIP. My olimex board has a button you need to hold during reset. You probably have to short a jumper.

    Also, verifying is just checking. It shouldn't matter.
    Last edited by snoekie; 11-11-2010 at 07:12 AM

  5. #5
    I've the same problem ,i dont know how to turn this clone (with pic ) on dfu loader mod .

  6. #6
    I've a PS3Break 1.0. It's one of those models which can't be updated and don't come with inquiry code. I contacted PS3Break and they gave me that answer on my question "How to bring that dongle in DFU/Bootloader mode ?".

    If you don't have the version 1.0 take a look of the homepage ( [Register or Login to view links] ) and follow the introductions.

  7. #7
    Well... i checked their installation guide and looked in the F.A.Q

    There is nothing on how to put in in DFU/Bootloader mode ?

    Ofcourse i know i have to push the update button LOL... but both "configurations" result in a unknown USB device and on apple it says bootloader missing
    Last edited by B4rtj4h; 11-11-2010 at 01:02 PM Reason: Automerged Doublepost

  8. #8
    Download "PS3Break Firmware Uploader V1.0" if no device is detected this message will come.

    >> Device not detected!
    Please press the >Upgrade Button< at the dongle for a few seconds
    and then release it to enter program mode! <<

    Thats what you do.

  9. #9
    Nope... not working.

    This is step by step what i did:

    1. Downloaded the Flash program from the PS3break v1.0
    2. Found out it was ATMEL Flip 3.4.2 -.-
    3. Tried to connect
    4. Got the error : javaw.exe - systemerror ..... libusb0.dll is missing.
    5. reinstalled Java
    6. Still get the error and the program also says: ATLibUsbDfu.dll not found
    While this file is in the folder,
    7. Copied the file in every subfolder from the program but no luck

    thanks for the idea though!

  10. #10
    that is what i get ive got the v1.0 ps3break... can i update mine with atmel flip if so which version of ps3break should i use.

 
Sponsored Links

Page 1 of 2 12 LastLast
Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News