Sponsored Links

Sponsored Links

Results 1 to 3 of 3



  1. #1
    Contributor tuni8390's Avatar
    Join Date
    Feb 2010
    Posts
    6
    Sponsored Links

    [Answered] PS3 won't boot after downgrade help?

    Sponsored Links
    Hello,

    A friend just gave me his PS3 slims 2504A. He downgraded it by teensy2.0++ and NOR360CLIP and he got to boot once on the CFW. Then he turned it off and now when we turn it on, it stays on for 3 seconds and then shuts down with no lights at all. If i try to turn it on again, the red light reappears as in standby mode, no beeps or yellow lights guaranteed.

    I assume it's not the PSU since I can do a complete fan test. I tried to put the exit lv2diag.self file on a FAT32 pendrive but it didn't change anything. Any clue ?

    Thanks in advance !
    Best Answer - Posted by racer0018:

    Also if you can solder, solder a wire from the nor tristate to a ground and if it stays on then it is not hardware but software. Also flash it again.

  2. #2
    VIP Member windrider42's Avatar
    Join Date
    Feb 2008
    Posts
    935
    Sponsored Links
    Sponsored Links
    Get your friend to flash it again. Something went wrong.

  3. #3
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    703
    Sponsored Links
    Sponsored Links
    Also if you can solder, solder a wire from the nor tristate to a ground and if it stays on then it is not hardware but software. Also flash it again.

 

Sponsored Links

Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News