Results 1 to 3 of 3



  1. #1
    Registered User lachyz's Avatar
    Join Date
    May 2011
    Posts
    2

    [Answered] Ps3 won't accept discs after laser replacement help?


    I recently bought a new laser for my broken ps3 slim. Before this happened it was accepting discs, it made a noise as if it was ejecting the disc and then it would just have the loading symbol in the top right hand corner.

    I bought a new laser and deck and replaced it and now its not accepting discs, however when i press the eject button with or without a disc in the blue light turns on and it makes a low pitch click noise four times. Please help.

  2. #2
    Senior Member severusx's Avatar
    Join Date
    Sep 2010
    Posts
    663

    Sounds like you didn't connect the drive motor correctly to the loader. That noise is the spindle trying to spin up a disc. Check your assembly again.

  3. #3
    Registered User lachyz's Avatar
    Join Date
    May 2011
    Posts
    2
    I just took it apart and reassembled it from scratch and i'm quite sure nothing was not connected properly. One thing i have noticed is that when the click noise sounds, the blu-ray lens flashes on every click.

    Just went through a third time and realized i had the ribbon cable for the drive motor in incorrectly. Silly me thanks a lot.
    Last edited by lachyz; 05-25-2011 at 11:12 AM Reason: Automerged Doublepost