Sponsored Links

Sponsored Links

Results 1 to 3 of 3



  1. #1
    Registered User hanna21's Avatar
    Join Date
    Oct 2013
    Posts
    3
    Sponsored Links

    [UnAnswered] PS3 urgent unbrick help?

    Sponsored Links
    cech2003b dyn001 mother board , i have connected to the sbe from the flasher to tristate on ps3 it powers up. i added my bkpps3.bin to minisd card and now everytime i try and flash by pressing the start button light number 1 ,5,6 lights up blinks please help.

    by the way i re-ordered new cable just to make sure and be on safe side until then please advise thanks

    i opened up my micro-sd card and here's what i see:

    log inside of it, start logging... program PS3 BIOS. fail to initialize PS3 BIOS.

    things i tried:

    i put 1 leg on top of the clip gently , did not work
    i held it down with fingers did not work
    and now i purchased a clamp , did not work

    all methods give me flashing lights 1 ,5 ,6 blue lights

    is there a possibility my cable gone bad?

  2. #2
    Forum Moderator misiozol's Avatar
    Join Date
    Sep 2010
    Posts
    540
    Sponsored Links
    Sponsored Links
    Double check all soldering points , Have you write something to flash ? Does consoles boots up if you desolder everything ?

  3. #3
    Registered User hanna21's Avatar
    Join Date
    Oct 2013
    Posts
    3
    Sponsored Links
    Sponsored Links
    i set switch up rest down!!! then power up and try press start and it gives me blinking lights for 1,5,6 inside the micro-sd i se log program PS3 BIOS. fail to initialize PS3 BIOS.

    i have 2 valid backup dumps + i patched it and transfered to sd-card.

    i am trying to fix the 1,5,6 flashing issue.

 

Sponsored Links
Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News