Sponsored Links

Sponsored Links

Results 1 to 7 of 7



  1. #1
    Registered User darkey's Avatar
    Join Date
    Aug 2012
    Posts
    6
    Sponsored Links

    [Answered] PS3 Slim Rsod to Rlod help?

    Sponsored Links
    Hey guys please help me my ps3 got RSOD then RLOD its 320gb slim it had rogero cfw 3.7 so i tried to install a spoofer it overwritten dev file's and boom rsod i tried installing ofw 3.55 and it went rlod help me please i never opened the ps3's hardware

  2. #2
    Senior Member drphuz's Avatar
    Join Date
    Jan 2011
    Posts
    144
    Sponsored Links
    Sponsored Links
    3.7? why? Are you on DEX? one problem could be you tried to downgrade using a ofw. bad move. if what I tell you doesn't work you will have to use a flasher. OK TRY THIS...

    download 999 downgrader
    rename it and put it on a usb (/ps3/update/)
    Unplug it. leave it unplugged for 2 minutes.
    use your a/v cords not hdmi cord.
    put in your usb flash with 9.99 downgrade in.
    hold power down let console turn on and off.
    release power. hold power down again til it beeps five times, let go of power.
    IMMEDIATELY tap eject. you will be in a recovery mode.
    do your firmware update. let it reboot and you should be fine.

    In the future remember you can't downgrade with ofw. you have to use a cfw to get back on an 3.55 then ofw, then 3.55cfw and then your current cfw of choice. I am a firm believer in REBUG. I can easily go from any higher cfw to 3.55 and bypass a couple steps.

    hope this helps.

  3. #3
    Forum Moderator misiozol's Avatar
    Join Date
    Sep 2010
    Posts
    457
    Sponsored Links
    Sponsored Links
    Have you try to do it via recovery mode install CFW?, do you have copy of your flash so you can reflash it ?

  4. #4
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329
    Sponsored Links
    Sponsored Links
    RLOD = powering off after 3-5 seconds = full brick.

    From experience your only hope is hardware flasher/unbricking.

    When installing FW from USB you don't need to press power then eject - this is only needed with a FSM dongle. Simply power up the console and it will initialize the LV2diag.self from the USB automatically if found.

    If its instant power off then you're in need of a flasher & some experience in flash rebuilding

  5. #5
    Senior Member drphuz's Avatar
    Join Date
    Jan 2011
    Posts
    144
    crazy he was on 3.7 anyway. what was that like a hybrid 3.55 anyway? if I remember that firmware wasn't dehashed and the qa flag wasn't turned on... he may have to flash no matter what.

  6. #6
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    698
    Yes he will have to use a hardware flasher. Thanks.

  7. #7
    Registered User darkey's Avatar
    Join Date
    Aug 2012
    Posts
    6
    Thank for your support guy's I will try and report back

 

Sponsored Links

Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News