Sponsored Links

Sponsored Links

Results 1 to 8 of 8



  1. #1
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5
    Sponsored Links

    [Answered] PS3 pa0 nor tristate point dia-001 help?

    Sponsored Links
    does anyone have a picture of pa0 nor tristate point dia-001 motherboard? i can't find anywhere or tell me where it is on the board this is to unbrick a cech-h with an e3 flasher
    Best Answer - Posted by racer0018:

    Here is the point that i use when i solder up a progskeet. It is the TRI point. thanks

  2. #2
    Senior Member technodon's Avatar
    Join Date
    Sep 2010
    Posts
    412
    Sponsored Links
    Sponsored Links
    post some pictures of your board and i will take a look

  3. #3
    Contributor ichris26's Avatar
    Join Date
    Sep 2009
    Posts
    10
    Sponsored Links
    Sponsored Links
    Here is a picture that shows the NOR Tristate pinout on the DIA002 which has the same pinout as the DIA001 minus the #WP Testpoint.
    Attached Thumbnails<br><br> Attached Thumbnails

    DIA-002_by_DiscoBear.jpg  

  4. #4
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5
    here are the picture of the bottom side of the board it is a CECHH01 DIA-001mother board. The first picture is of hold board and the other two are of half of board and it a little closer so you can see if this not enough tell what section i will take apicture closer thanks for your help
    Attached Thumbnails<br><br> Attached Thumbnails

    IMG_0076.JPG   IMG_0075.JPG   IMG_0077.JPG  

  5. #5
    Senior Member technodon's Avatar
    Join Date
    Sep 2010
    Posts
    412
    i got no idea to be honest, someone else might know for sure.. if i were to guess i would go with the one i circled in red, but i wouldn't try soldering to it cause i could be wrong and maybe it would kill your board.. don't know
    Attached Thumbnails<br><br> Attached Thumbnails

    IMG_0077.JPG  

  6. #6
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    701
    Here is the point that i use when i solder up a progskeet. It is the TRI point. thanks
    Attached Thumbnails<br><br> Attached Thumbnails

    DIA-001_NOR.jpg  

  7. #7
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5
    Thanks for your help

  8. #8
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    701
    No problem that is what we are here for. Let us know how it turns out. thanks

 

Sponsored Links
Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News