Results 1 to 8 of 8



  1. #1
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5

    [Answered] PS3 pa0 nor tristate point dia-001 help?


    does anyone have a picture of pa0 nor tristate point dia-001 motherboard? i can't find anywhere or tell me where it is on the board this is to unbrick a cech-h with an e3 flasher

  2. #2
    Senior Member technodon's Avatar
    Join Date
    Sep 2010
    Posts
    410

    post some pictures of your board and i will take a look

  3. #3
    Contributor ichris26's Avatar
    Join Date
    Sep 2009
    Posts
    10
    Here is a picture that shows the NOR Tristate pinout on the DIA002 which has the same pinout as the DIA001 minus the #WP Testpoint.
    Attached Images<br><br> Attached Images


  4. #4
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5
    here are the picture of the bottom side of the board it is a CECHH01 DIA-001mother board. The first picture is of hold board and the other two are of half of board and it a little closer so you can see if this not enough tell what section i will take apicture closer thanks for your help
    Attached Images<br><br> Attached Images


  5. #5
    Senior Member technodon's Avatar
    Join Date
    Sep 2010
    Posts
    410
    i got no idea to be honest, someone else might know for sure.. if i were to guess i would go with the one i circled in red, but i wouldn't try soldering to it cause i could be wrong and maybe it would kill your board.. don't know
    Attached Images<br><br> Attached Images


  6. #6
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    685
    Here is the point that i use when i solder up a progskeet. It is the TRI point. thanks
    Attached Images<br><br> Attached Images


  7. #7
    Registered User fred495's Avatar
    Join Date
    Aug 2010
    Posts
    5
    Thanks for your help

  8. #8
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    685
    No problem that is what we are here for. Let us know how it turns out. thanks